GE-K-31-2022-23 - REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN VARIOUS UNIT AT THASGAM UNDER GE KARGIL

Amount

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.

All as per Srl item No 02 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 02 here in before but for one 3 pin socket outlet 5 Amps on independent board.

All as per Srl item No 02 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

S & F Switch piano flush type 5 Amps, single pole one way.

S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type.

Supply and fixing in replacement LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F in Ceiling rose surface bakelite 65x50mm, two to three terminals.

S & F Bell push, flush type, 5 Amp

S & F Electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified.

S&F pvc gang box including switch socket combination 2 in 1 and 3 and 2 pin 5 Amps flush type

S&F pvc gang box including switch socket combination 2 in 1 and 3 and 2 pin 15 Amps flush type

S&F pvc gang box including switch 5 Amps flush type

S & F in replacement Lamp holder, insulated body with back plate suitable for batten fittings

S & F in replacement Modular socket 6A-2/3 pin combined 2 module

S & F in replacement Modular socket 6A/16 A -2/3 pin combined 2 module

S & F in replacement Modular switch 1 way 6A, 1 module

S & F in replacement Modular switch 1 way 16A, 1 module

Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F in replacement plug top 05 Amp 230 Volt AC.

S & F in replacement plug top 15 Amp 230 Volt AC.

Dismantling of existing MCB DBm of any size including MCBs, isloator as specified anddirected by Engineer -in-charge

S & F in replacement Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

S & F in replacement Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed.

S & F in replacement Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 2 way including blanking plates where required, complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.

Dismantling of existing service cable and submain wiring including casing caping from existing surface for replacement

S & F Sub main wiring with two single core 4 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified.

S & F Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 6 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified.

Dismentling of existing earthing and replacemet of Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel as shown in electrical plate No. 3 conected to earth test point as specified or indicated including testing on completion.

S&F in replacement1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F 1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

Supply and fixing in replacement LED bulb 9 watt, 230 volts.

Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in replacement LED recess swivel down light fitting 3 Watt 3000 K make: Havells cat part No LHEEGEPBIE1W003 or equivalent approved make, complete all as specified.

S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.

Supply and fixing in replacement square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply & fix LED building security light 45 watt energy efficient with bracket,suitable dia pipe for fixing the street light in wall all as directed.

Note :Deduction for amount of Rs 35,138.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

osho traders

SUMEET TRADING CORPORATION

M/S HAJI HASSAN ENGINEERING WORKS

M/S ABASS ENTERPRISES

KASHMIR FAIR DEAL SERVICES

Ms/ ladakh technical services