Demolishing and repair to existing gazebo in sunita dattaji nalavade garden in G south ward

Demolishing and repairs to existing Gazebo in Sunita Dattaji Nalavade Garden in G/South Ward

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Beams, joists, R.C.C. columns, piles, pile caps etc., in any thickness and size manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Extra over above item CS-EW-1,15 &16 for lift from 1.5m to 3.0m.

Providing &Laying dry stone Rubble Pitching with average 150 mm size and of minimum thickness 230 mm hard stone set in regular lines to form plane surface, handpacked and interstices thoroughly filled with small chips including providing and laying gravel quarry spells underneath for leveling undulations of the ground. etc complete as directed by Engineer In Charge. (Note: The rate includes the royalty and other taxes if any)

Providing & Laying 150 mm thick dry stone Rubble Soling with average 150 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge. (Note: The rate includes the royalty and other taxes if any)

Providing Pre-constructional anti-termite treatment conforming to IS-6313 (part II) using chloropyrifos EC 20 Emulsion or equivalent of 1% concentration by weight for creating barrier under and all around foundation pits, wall trenches, basement excavation, backfill in immediate contact with foundation and treating the top surface of plinth filling, junction of wall & floor, along the external perimeter of building, expansion joints, surrounding of pipes, water conduits and at places suggested and as directed by Engineer-In-Charge covering 10 years guaranty. (plinth area should be considered for measurement and payment.)

Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Foundations, footings, bases of columns, rafts, pilecap

Slabs, Suspended floors, roofs, landings, balconies, canopy and access platform

Columns, Pillars, Piers, Posts and Struts.

Lintels, beams, plinth beams, girders, floor beam, coping.

Extra and over for providing richer RMC of M-30 grade cement concrete instead of M20 (Note :- Cement content considered in this item is @ 340 kg/cum as per IS 456 table showing minimum cement content.)

HYSD steel bars (Fe 415)

Do with broken China mosaic flooring instead of IPS set in cement mortar (1:4) 40 mm thick

Cement mortar 1:3 (1 cement : 3 coarse sand)

15 to 20mm thk. Jaisalmer Stone for width upto 300 mm

Providing and laying polished natural stone strips upto 100mm wide as specified below (Machine cut) 25-30 mm. thick of an approved quality and size for paving /flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, machine polishing at site, curing, finishing, etc complete as directed by Engineer In Charge.18 mm thk. Ruby red, jet black, Hasan green Granite tiles/slab

Rounding the edge in quarter round shape of the stonework specified below including high gloss machine polishing as directed by Engineer In Charge. Shahbad stone/ Kadappa stone/ Tandur stone/ Kota stone/ Any type of marble/ Any type of Granite stone

Providing and applying 25 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.) In Cement mortar 1:3

Providing and applying 6 mm thick internal ceiling plaster in single coat in cement mortar 1:3 with white cemetecious wall putty (Birla white or equivalent) finish at all heights and locations for concrete surfaces including hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.For plastered wall surface

Providing and applying first single coat of approved primer and two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.

Providing and fixing 20mm thick Mangalore tiles of approved make as roof including fixing in cement mortar (1:3) with necessary vatas and cement pointing, coloured with red or dammering etc. complete as directed.

Providing & laying on roof 20mm thick Mangalore tile ridge caps and /or hip sets on existing wooden or steel frame structure including fixing in cement mortar (1:3) with necessary vatas and cement pointing, coloured with red or dammering, etc complete as directed.