Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 UDYAM WB 23 0013338 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | ₹28.1 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹28.7 LRejected-Finance NANAK TOWER 3RD FLOOR SEVOKE ROAD SILIGURI | ₹28.7 L | L2 | Rejected-Finance High |
| 3 | L3₹28.9 LRejected-Finance | ₹28.9 L | L3 | Rejected-Finance Highest |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
6 Dec 2022, 4:00 pmClosed
Executive Engineer
Office of the Executive Engineer Mechanical_Electrical Division Berhampore PH Engineering Dte Netaji Subhas Road P H E River Side Complex Berhampore Murshidabad PIN_742101
Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for Augmentation in connection to Accommodate FHTC at Pump House No.-I ,II and IV under Malibari ground water based water supply s
2022_PHED_423908_18
WBPHED/EE/MEDB/NIeQ-04 of 2022-23
Open Tender
MECHANICAL
90 days
Berhampore
Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for Augmentation in connection to Accommodate FHTC at Pump House No.-I ,II and IV under Malibari ground water based water supply s
6 documents required · 6 mandatory
₹75,000
9 Jan 2026
19 Nov 2022
9 Dec 2022
19 Nov 2022
6 Dec 2022
19 Nov 2022
Amount
PART-A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE : 29 cubic mtr./Hr. HEAD : 44 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery.
DISCHARGE : 29 cubic mtr./Hr. HEAD : 44 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery.
Supply delivery at site of 4 Sq. mm. 3 core, water proof flat copper cable as per specification of NIT N.B:- Cable should be supplied as per site requirement.
Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 3-1/2core XLPE insulated Al .Ar. Armoured cable as per specification of NIT . N.B:- Cable should be supplied as per site requirement.
Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cable as per specification of NIT. N.B:- Cable should be supplied as per site requirement.
Supply delivery at site of 100 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge)as per specification of NIT
Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.as per specification of NIT
Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.as per specification of NIT
Supply delivery fitting fixing of 100 Amp. 4 pole off load change over switch.
Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted 415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (7.5HP to 12.5HP)
Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT
Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT
Supply and delivery at site of 80mm dia CI top & bottom adopter and as per specification of NIT
Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer and as per specification of NIT
Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80 mm. and as per specification of NIT
Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flange etc. and as per specification of NIT
Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per specification of NIT
Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]
Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.
Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials
Earthing and lighting protection for pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT
Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fitting LED outdoor fixture complete as per specification of NIT.
Supply & delivery at sites chair,table,Celing Fan,wooden board, Kiox Box as per specification of NIT
Supply & delivery at site of suitable capacity Power correction arrangement as per Specification of NIT.(15 KVA)
Supply delivery at site and storage of Disinfection arrangement with Flow rate 100 LPH as per specification of NIT.
PART-B Installation of all items as mentioned in Sl.No.1 to 25 (Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.
Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.
Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 25) as per direction and to the entire satisfaction of E.I.C.
Operation & guarding of the pumping machinery with full satisfaction of EIC (90days x 03 nos Tube well) = 270Days.
Add GST @18%
MS P P ELECTRICALS
UNIVERSAL ENTERPRISES
Bidder Name
DEY ENTERPRISE
MS P P ELECTRICALS
UNIVERSAL ENTERPRISES
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid