BUILDING REPAIR(CIVIL) AND ELECTRICAL MAINTENANCE LIKE ADDITION/ALTERATION, MISC REPAIR AND PERIODICAL SERVICE TO BUILDING No.P-09 OF QAE(ME) AT OFDR

Amount

Taking down cement plaster on brick/stone/PCC block walls/surfaces of any description including raking out joints hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:6 on brick/stone/concrete walls finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on brick/stone/concrete walls finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1:6 on brick/stone/concrete walls finished even and smooth using 3mm thick wall care putty complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1:4 on surfaces of ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of ceiling, and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls, and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats on old work till desired finish is obtained complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old treated surfaces of walls, applying 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of primer including preparation of surfaces complete all as specified and as directed.

Material and labour for preparation of old treated steel surfaces exceeding 10cm width or girth and applying two coats of aluminium paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old treated surfaces of walls, applying 3mm thick wall care putty and applying two coats of plastic emulsion paint over a coat of primer including preparation of surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls, and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for Cutting openings, through brick walls built in cement mortar for door,window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core,etc. to store and rubbish rubbish off MD land complete all as specified and as directed. NOTE Serviceable bricks and hardcore as obtained above shall be handed over to MES.

Material and labour for complete removal of existing treatment from old treated surfaces of ceilings, applying 3mm thick wall care putty and applying two coats of plastic emulsion paint over a coat of primer including preparation of surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement paint complete all as specified and as directed.

Material and labour for preparation of old treated surfaces of walls and applying two coats of cement paint complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old treated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth including levelling the surfaces with wood filler or POP, putty etc and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4 all as specified and as directed.

Material and labour for preparation of new/untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (for steel windows) complete all as specified and as directed.

Material and labour for preparation of new/untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed.

Taking down chowkats or frames with shutters area exceeding 1.5 sqm but n.exceeding 4 sqm each (without taking off shutters from the frames) including cutting holes in brick/stone/concrete walls built in cement mortar for removal of hold fasts and making good the same in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) complete all as specified and as directed.

Taking down chowkats or frames with shutters area not exceeding 1.5 sqm each (without taking off shutters from the frames) including cutting holes in brick/stone/concrete walls built in cement mortar for removal of hold fasts and making good the same in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) complete all as specified and as directed.

Material and labour for cutting holes in brick/stone/concrete walls exceeding one brick thick but not exceeding two brick thick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1(using 20mm graded stone aggregates) as required all as specified and directed.

Taking down chowkats or frames with shutters area exceeding 1.5 sqm but n.exceeding 4 sqm each (without taking off shutters from the frames) and refixing the same in other openings including cutting holes in brick/stone/concrete walls built in cement mortar for removal and fixing of hold fasts and making good the same in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

Taking down existing door shutters area exceeding 1.0 sqm but n.exceeding 2.0 sqm each and refixing in the same opening including refixing builders hardware of any description complete all as specified and as directed.

Material and labour for providing second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed

Material and labour for providing factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed

Material and labour for providing mild steel sections in framed work such as grills, gratings,hold fasts etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed

Material and labour for providing factory made 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches, or other fittings all as specified and directed

Material and labour for providing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. all as specified and directed

Material and labour for providing factory made solid PVC moulded shutter 28 to 30mm thick (stile) with particle board core with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing all as specified and directed

Material and labour for providing factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded including a shop coat of red oxide primer all as specified and directed

Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sections as in frames and shutters for doors,windows, ventilators any type with one or more rebates including joining cleat for fixing glazing clips, ruber neoprene packing,handles,hinges and other builders hardware,anodised aluminum snap beading screws locking arrangements etc. complete all as specified and directed. NOTE The rate quoted is deemed to be inclusive of all fixtures and fittings but not inclusive of glass and wire cloth which shall be measured and paid separately. However for measurement purpose the `kg' will be worked out as per the weight of aluminium section actually incorporated at site and the element of fittings and fixtures is deemed to be included in the rate quoted per kg.

Supply and fix 9mm thick Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination and other side with balancing white lamination fixed with screws to timber frame workcomplete all as specified and directed.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed

Supply and fix 4.8mm thick Sheet glass,ordinary quality and glazing with rubber gasket in square exceeding 0.5 sq. m in each pane all as specified and directed

Supply and fix butt hinge, medium weight, cold rolled mild steel, and fixed, size of hinge 100 mm all as specified and directed

Supply and fix butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinge 100 mm all as specified and directed

Supply and fix in repairs aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm all as specified and directed

Supply and fix aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm all as specified and directed

Supply and fix aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt 200 mm all as specified and directed

Supply and fix extruded aluminium alloy handles of size 150 mm, fabricated type,anodised all as specified and directed

Supply and fix in repairs extruded aluminium alloy handles of size 150 mm, fabricated type,anodised all as specified and directed

Supply and fix in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples aluminium beads, gasket etc to aluminium/steel windows, vents etc complete all as specified and directed

Supply and fix in repairs 3mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m complete all as specified and directed

Supply and fix in repairs 6.4mm thick rough cast wired glass,and glazing with oil putty in square n exc 0.5 sq. m complete all as specified and directed

Taking down and refixing after repairing damaged aluminium sections (if required) of aluminium door/window shutters with frame area exceeding 1.0 sqm not exceeding 2.0 sqm each in the same position all as directed. NOTE: Aluminium sections shall be measured and paid separately under item 55 of BOQ as Supply only. Any damage whilst taking down and refixing shall be made good by the contractor at no extra cost to the department.

Supply only powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sections as in frames and shutters for doors,windows, ventilators any type with one or more rebates including joining cleat for fixing glazing clips, ruber neoprene packing,handles,hinges and other builders hardware,anodised aluminum snap beading screws locking arrangements etc. complete all as specified and directed. NOTE The rate quoted is deemed to be inclusive of all fixtures and fittings but not inclusive of glass and wire cloth which shall be measured and paid separately. However for measurement purpose the `kg' will be worked out as per the weight of aluminium section actually incorporated at site and the element of fittings and fixtures is deemed to be included in the rate quoted per kg.

Supply and fix in repairs Door closer made out of aluminium (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Supply and fix Door closer made out of aluminium (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Supply and fix factory made Solid PVC Wall Lining 5mm thick consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

Supply and fix factory made 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.complete all as specified and directed

Demolition of tiles of any description or thickness in floors and vertical surfaces including screed bed and back coat.complete all as specified and directed

Material and labour for providing Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

Material and labour for providing Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces like dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick back in cement mortar 1:4 complete all as specified and directed

Material and labour for providing coloured glazed ceramic tiles in vertical surfaces like skirting, dado etc of size 450x 300x 7mm thick set and jointed in neat cement slurry and pointedin white or colour cement to match,fixed over and including 10mm thick back coat in cement mortar (1:4) all as specified and directed.

Material and labour for providing coloured non skid ceramic tiles in floors of size exceeding 0.11sqm not exceeding 0.18 sqm 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Material and labour for providing coloured non skid ceramic tiles in vertical surfaces like skirting/dado etc of size exceeding 0.11sqm not exceeding 0.18 sqm 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick back coat in cement mortar (1:4) all as specified and directed.

Material and labour for providing coloured non skid ceramic tiles in floors of size 300mm x 300mm x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Material and labour for providing 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite fixed over and including 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Supply and fix factory made 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre size of grid 605 x 605mm including providing hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Supply & Fix in repairs vitreous china ,squatting pan Orissa pattern size 580x440 mm white with integral foot rest including provision of lime concrete bedding and including providing 10 litres capacity PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including a pair of painted CI brackets and flush pipe including connection to trap, and to flushing pipe, anti-syphonage pipe, etc and joint between flushing pipe and socket of WC pan, premade complete all as specified and directed.

Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,including one 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including a pair of painted cast iron brackets, flush pipe and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..including stainless steel toilet paper holder fixed to walls with chromium plated screws complete all as specified and directed.

Supply & Fix in repairs Vitreous China wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm brass CP waste coupling and PVC flexible pipe and mounted on a pair of painted cast iron brackets including providing 15mm bore dia of pipe, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedetc complete all as specified and directed.

Material & Labour for providing 15mm thick screed bed in cement mortar 1:3 (mixed with water proofing compound as per manufacturers instruction's) on brick/concrete surfaces all around the sunken portion of floor with proper slope including ponding the surfaces for 07 days with water as directed, complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid separately as Supply only

Material & Labour for providing APP based polymeric membrane minimum weight not less than 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150gms/sqm) by torch application( sealed by flame) with over lap of 7.5cm longitudinally and 10 cm transversely including priming surfaces with bituminous primer polymerised primer oil based @ 0.20 kg / sqm and including applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.20 kg / sqm over primer all as per manufacturers instructions complete all as specified and directed.

Material and labour for providing cement concrete 1:5:10 type E2(using 40mm graded stone aggregates) as in foundations,filling and mass concrete complete all as specified and directed.

Supply and fix 40mm Bore of pipe Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as in spouts complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Supply, lay connect and test 25mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions(compulsory for every branch), connector pieces etc with screwed socket joints & fixed complete to walls and ceilings or laid in floors including taking down old tubing with fitting all as specified and directed.

Taking up or down steel tubing and connections including cleaning and refixing 25mm bore of tube and connections in new or old position (Walls, ceiling, floors, etc.) all as directed

Supply, lay connect and test 20mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions(compulsory for every branch), connector pieces etc with screwed socket joints & fixed complete to walls and ceilings or laid in floors including taking down old tubing with fitting all as specified and directed.

Taking up or down steel tubing and connections including cleaning and refixing 20mm bore of tube and connections in new or old position (Walls, ceiling, floors, etc.) all as directed

Supply, lay connect and test 15mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions(compulsory for every branch), connector pieces etc with screwed socket joints & fixed complete to walls and ceilings or laid in floors including taking down old tubing with fitting all as specified and directed.

Taking up or down steel tubing and connections including cleaning and refixing 15mm bore of tube and connections in new or old position (Walls, ceiling, floors, etc.) all as directed

Disconnecting existing tanks of capacity exceeding 500 litres and not exceeding 1000 litres (including 1000 litres), setting aside (or lowering if required) for repairs, cleaning, etc. including hoisting,reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. refixing float valve and including supplying and fixing 20mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks 1000 Litres capacity (cylindrical vertical with closed top cylindrical vertical with closed top hinged cover) multilayered hoisted and fixed in position all as specified in SSR Part I including supplying and fixing 20 mm bore dia of pipe Ball valves (Min weight 210 gms) high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed and 25mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs Vitreous China white urinals, half stall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. including providing chromium plated urinal spreader for fixing with 15 mm dia pipe and 32mm waste pipe heavy duty with plastic check nuts) all as specified and directed

Supply & Fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed

Demolition of Brickwork /PCC Block/stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed.

Supply and fix in repairs two way chromium plated bib cock with wall flange all as specified and directed . Make Jaquar Cat No.512A

Supply & fix chromium plated health faucet with 8mm dia 1.2 m long flexible tube and wall hook including chromium plated angle stop cock 15mm bore dia of pipe complete all as specified and directed Make Jaquar Product Code: ALD-CHR-573

Supply & fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Supply & fix in repairs 15mm bore dia of pipe brass chromium plated fancy type stop cock with wall flanges complete all as specified and directed

Supply & fix in repairs 15mm bore dia of pipe Bib taps, brass chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

Returning, filling in (soils), including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed

Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point. complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.

Material and labour for providing Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete all as specified and directed

Material & Labour for providing precast cement concrete solid block masonry design mix type C5,exceeding 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Material & Labour for providing plain Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in surface channels and drains complete all as specified and directed. NOTE : Extra labour in forming channels shall be paid for in addition under relevant item of BOQ and deduction from the volume of concrete shall be made for the channel opening

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and directed.

Material & Labour for providing plain Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick,finished even and smooth without using extra cement including forming dummy joints at 2m centre to centre and at change in direction and filled with a mixture of bitumen and fine sand in ratio of 1:3 complete all as specified and directed.

Material and labour for providing cement Concrete bed (1:3:6) type C2 (using 40mm graded stone aggregates) to drain pipes (Bore of pipe 150 mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed

Supply,lay, joint and test Reinforced concrete pipes, class NP2, bore of pipe 150 mm laid and jointed complete with collars laid in trenches and jointed including demolition and taking out of old pipes set in cement mortar all as specified and directed. NOTE Excavation/earthwork shall be measured and paid separately

Material and labour for providing pre cast reinforced cement concrete 1:2:4 type B1(using 20mm graded stone aggregates) as in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including steel formwork set in cement mortar (1:4) all as specified and directed. NOTE Reinforcement shall be measured and paid separately.

Material and labour for providing pre cast reinforced cement concrete 1 : 1 1/2 :3 type A1 (nominal mix) (using 20mm graded stone aggregates) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps,columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match including steel formwork set in cement mortar (1:4) all as specified and directed. NOTE Reinforcement shall be measured and paid separately.

Material & Labour for providing Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Suppply and fix 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes with fittings all as specified and directed. NOTE Excavation/earthwork shall be measured and paid separately

Suppply and fix 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes with fittings all as specified and directed. NOTE Excavation/earthwork shall be measured and paid separately

Suppply and fix 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including taking down old pipes with fittings all as specified and directed.

Suppply and fix 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls including taking down old pipes with fittings all as specified and directed.

Suppply and fix 110mm bore PVC (SWR) bends any radius all as specified and directed.

Suppply and fix 75mm bore PVC (SWR) bends any radius all as specified and directed.

Suppply and fix 110mm bore PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed.

Suppply and fix 75mm bore PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed.

Suppply and fix 110mm bore PVC (SWR) branch piece,single (single Y) equal or unequal all as specified and directed.

Suppply and fix 75mm bore PVC (SWR) branch piece,single (single Y) equal or unequal all as specified and directed.

Suppply and fix 110mm bore PVC (SWR) vent cowl all as specified and directed.

Suppply and fix PVC (SWR) floor trap 75mm diameter of outlet, plain with grating including jointing with solvent cement all as specified and directed.

Suppply and fix PVC (SWR) floor trap 75mm diameter of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

Suppply and fix 110mm bore PVC (SWR) 'P’ trap all as specified and directed.

Suppply and fix 32mm bore of trap brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

Material & Labour for providing plain Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in copings and the like including weathering, slightly rounded or chamfered angles and throating,including necessary steel formwork complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (including fittings such as switches, ceiling roses, pendants, regulatos, sockets light fittings etc) and making good disturbed surfaces of walls, floors etc to match with existing surfaces all as directed.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces

Material & Labour for providing concealed type point wiring with and including 1.5 sqmm (FRLSH) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade copper conductor cable drawn through and including PVC rigid non metalic conduit of external dia not less than 20 mm dia on ceiling/walls etc, with and including continuous 1.5 sqmm PVC insulated single core multi stranded copper conductor cable (FRLSH) 1100V grade as earth continuity conductor connected to common earth and earth dolly and including metal sheet enclosure rectangular terminal boxes of suitable size and modular white cover plates suitable for mounting modular switches, sockets etc for one light point controlled by one, one way switch all as specified and as directed . Note - Quoted rate shall include for necessary cutting chases in walls, ceilings etc and making good the disturbed surfaces including plastering and painting to match with the existing colour all as directed.

All as per item No.128 herein before but for one ceiling/exhaust fan point controlled by one switch and regulator

All as per item No.128 herein before but for one call bell point controlled by one bell push

All as per item No.128 herein before but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per item No.128 herein before but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per item No.128 herein before but wiring with and including 4.0sqmm (FRLSH) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade copper conductor cable and earth wire also of 4.0sqmm (FRLSH) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade copper conductor cable for 15 amps power point.

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular switch 2 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix modular Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular switch 1 way 16 A, 1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix modular Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular Bell push 6A 1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Bell, AC, 230 volts, single pole all as specified and as directed.

Supply and fix Step regulator for fan, 120W-2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Ceiling rose, three terminals,230 Volt (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed.

Supply & fix LED tube light including rod fixtures 20 W to wall/suspended type as per site requirement all as specified and directed. Make HPL Cat No.HLPT51820PCGCW or equivalent approved in makes listed in particular specifications

Supply and fix LED downlighter recess mounted 1x1 15W all as specified and directed. Make Havells Cat No.Pluto 1 x 1 PLR 15W LED 857S or equivalent approved in makes listed in particular specifications

Supply and fix LED downlighter 2' x 2' 36W all as specified and directed. Make Bajaj Cat No.BZRSQL 36W GZI CW or equivalent approved in makes listed in particular specifications

Supply & fix LED mirror light 1 feet length 5W all as specified and directed Make Crompton Cat No.LDLSR05-CDL or equivalent approved in makes listed in particular specifications

Supply & Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole MCB 16 amps all as specified and directed

Supply and fix 4 way TPN distribution board sheet metal enclosure double door 415 volts with 200 Amps rated bus bar, complete all as specified and as directed.

Supply and fix 8 way SPN distribution board sheet metal enclosure double door 240 volts with 200 Amps rated bus bar, complete all as specified and as directed.

Supply and fix 4 way SPN distribution board sheet metal enclosure double door 240 volts with 200 Amps rated bus bar, complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 5-32 amps 10 KA, C series complete all as specified and as directed.

Supply and fix MCB SPN 6-32amp 10KA 240 volt C series complete all as specified and as directed.

Supply and fix MCB SPN 40 amp 10KA 240 volt C series complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 40 amps 10 KA,C series complete all as specified and as directed.

Supply and fix MCCB 4P 440 volt 100 amps 16 KA fixed thermal and magnetic setting Icu=100% Icu complete all as specified and as directed.

Supply and fix blanking plates for DBs complete all as specified and as directed.

Material & Labour for providing concealed type sub main wiring with and including two runs of single core 6 sqmm PVC insulated unsheathed (FRLSH) cable 1100V grade with stranded copper conductor drawn through and including non metallic rigid PVC conduit of specified size including accessories like tee bends etc and including single core 6 sqmm PVC insulated unsheathed (FRLSH) cable 1100V grade with stranded copper conductor green colour as earth wire all as specified and directed by Engineer-in-Charge. NOTE-Three runs of 6 sq.mm cable & One run of PVC conduit with accessories shall be measured as One length. Quoted rate shall include for necessary cutting chases in walls, ceilings etc and making good the disturbed surfaces including plastering and painting to match with the existing colour all as directed.

Material & Labour for providing concealed type sub main wiring with and including two runs of single core 4 sqmm PVC insulated unsheathed (FRLSH) cable 1100V grade with stranded copper conductor drawn through and including non metallic rigid PVC conduit of specified size including accessories like tee bends etc and including single core 4 sqmm PVC insulated unsheathed (FRLSH) cable 1100V grade with stranded copper conductor green colour as earth wire all as specified and directed by Engineer-in-Charge. NOTE-Three runs of 4 sq.mm cable & One run of PVC conduit with accessories shall be measured as One length. Quoted rate shall include for necessary cutting chases in walls, ceilings etc and making good the disturbed surfaces including plastering and painting to match with the existing colour all as directed.

Material and labour for providing Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DB including necessary earthwork and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 (using 20mm graded stone aggregates) design mix cover slab with 8mm dia MS TMT bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion. NOTE Quoted rate is deemed to include 7.5m of earth wire and protection pipe of same length

Taking down ceiling fan/exhaust fan of any type from its location and keeeping in safe custody and refixing the same after finishing of ceiling work/when directed, painting the fan complete with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust and preparation of surfaces etc all as specified and directed

Taking down carefully split AC/ window AC of any capacity including indoor and outdoor unit including copper tubing and accessories and keeping in safe custody and handing over the same to the department all as directed

All as per item No.128 herein before but for one light point controlled by two nos of two way switches

Supply, install and test split type invertor AC of 1.5 tonne 5 star both indoor and outdoor units including mounting on angle iron stand complete as per manufacturers instructions,all as specified and directed. Make CARRIER DURA FRESH NXI or equivalent approved in VOLTAS, GODREJ,SAMSUNG, HITACHI

Supply and fix galvanised wire 4mm dia on wall/ground with saddles etc complete all as specified and directed

Material and labour for providing earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised ironwire 4mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DB including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe and 40mm protection pipe upto 7.5m with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 (using 20mm graded stone aggregates) design mix cover slab with 8mm dia MS TMT bars at 100mm c/c both ways with MS Hook 8mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion. NOTE Quoted rate is deemed to include 7.5m of GI wire and protection pipe of same length

M/S V C SHETH

M/s JAYPEE ENTERPRISES