Construction of Sub Tehsil Building at Panchrukhi Distt. Kangra H.P.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-In-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as per the entire satisfaction and direction of Engineer-in-Charge, within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. The rate is inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Supplying & Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutments, Posts and Struts up to all width and heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stairs, (excluding landings) except spiral stair cases including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement: four sand: eight graded crushed/broken stone aggregate 40mm nominal size ) and curing complete, excluding cost of form work in foundation and plinth including carriage of material in all leads, lifts and other incidentals, as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) for reinforced cement concrete work with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter or as per approved design mix for works upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) for reinforced cement concrete work with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter or as per approved design mix for all work above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Steel reinforcement TATA TISCO/SAIL thermo-mechanically treated bars of grade fe-500 (Fe-five hundred) or more for reinforced cement concrete work including straigthening, cutting, bending, binding and placing in position all complete including carriage of material in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying damp-proof course 100mm (one hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 12.5mm (twelve point five millimetre) nominal size and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitument of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 Kilogram (one point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil, including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level to all floor level in all shapes and sizes in CM 1:6 (one cement isto six sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level to all floor level with Cement Mortar 1:4 (One cement isto four sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement isto 6 coarse sand isto twelve graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with:Cement mortar 1:6 (One cement isto six coarse sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone of approved quality in foundation and plinth including raking out joints with Cement mortar 1:6 (one cement isto six coarse sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium(anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for door,windows and ventilators of section No 14081 or as specified of Jindal / Hindalco with extruded built up standard tubular section fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) including carriage of material . within all leads, lifts and other incidentals, as per specification, Drawing, design and Direction by the Engineer -In -Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing coloured aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections or as specified of Jindal /Hindalco of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings, design, specification and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Prividing and Fixing factory made PVC door frame of size 50x47 mm (fifty into forty seven millimetre) with a wall thickness of 5 mm (five millimetre) made out of extruted 5mm (five millimetre) rigid PVC foam mitred at corners and jointed with 2 Nos.(two numbers) of 150mm (one hundred fifty millimetre) long brackets of 15x15 mm (fifteen into fifteen millimetre) M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm (nineteen into nineteen millimetre) M.S. square tube of 19 (nineteen) gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screw of 65/100 mm (sixty five oblique ,one hundred millimetre) size, complete as per manufacturer specification and direction of Engineer in charge including carriage ig material within all leads, lifts and other incidentals, as per approved drawing, design, specifications, spacification and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40 X 4 mm (seventy five into forty into four millimetre) M.S. angle iron 25 X 20 X 3 mm (twenty five into twenty into three millimetre) for doors, windows, frames manufactured from M.S. T - section 25 mmx 25 mmx 3 mm (twenty five into twenty five into three millimetre) and Z- Sections with M.S. flat 75mmx4mm (seventy five into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split end tails to each jamb including iron butt hinges 2.5mm (two decimal five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface. within all leads, lifts of material and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick phenol bonded (both Side ) prelaminated BWP Grade particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Greenlam / Merinolam / Kitlam / Vista approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetra complete as per architectural drawings and directions of Engineer- in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including carriage og material within all leads, lifts and other incidentals, as per approved drawing, design, specifications, specification and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket with float glass panes of 6 mm (six millimetre) thickness weight not less than 15.00 kg/ sqm (fifteen point zero kilogram per square metre) of Modi Guard / Saint Gobain including carriage of material within all leads, lifts of material and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket With float glass panes of 5 mm (five millimetre) thickness of Modi Guard / Sanit Gobain, including carriage of material within all leads weight not less than 12.50 kg/sqm (twelve point five zero kilogram per square metre) within all leads, lifts and other incidentals, as per approved drawing, design, specifications, specification and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing glazing in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra With Frosted glass of 4 mm (four millimetre) thickness weight not less than10.00 kg/ sqm (ten point zero kilogram per square metre) of Modi Guard / Saint Gobain, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing & fixing fly proof wire gauge to windows, clerestory windows & doors with Stainless steel (grade 304) wire gauze of 0.5 mm (zero point five millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides, includingcarriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

30 mm (thirty millimetre) thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a PVC hollow section of size 60x30 mm (sixty into thirty millimetre) and wall thickness 2 mm (two millimetre) (± 0.2 mm), with in built decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm (seventy five into two hundred twenty millimetre) having wall thickness 1.0 mm (one millimetre) and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm (twenty five into twenty millimetre)and 1 mm (one millimetre) (± 0.1 mm) wall thickness. The lock rail made up of'H' section, a PVC hollow section of size 100x30 mm (one hundred into thirty millimetre) and 2 mm (± 0.2 mm)wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S.'U' cleats. The shutter frame filled with a PVC multi-chambered single panel of size not less than 620 mm (six hundred twenty millimetre), having over all thickness of 20 mm (twenty millimetre) and 1 mm (one millimetre) (±0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm (six millimetre) galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing complete box of cup board shall be made of 25 mm (twenty five millimetre) thick water proof termite resistance commercial board of uniply / green ply/century ply /kit ply/ duraply/ marino (ISI marked) including shelves back side of cup board shall have 6/8 mm (six obliqe eight millimetre) thick water proof ply ( as per detail) .The shutter from all side shall have 6 mm (six millimetre) thick hard wood edging / lipping all round and will be finished both side with 1 mm (one millimetre) thick lamination of centurry / green lam / action tesa and 19mm (nineteen millimetre) thick water proof commercial board for shelves of uniply/ greenply/ century ply/ kit ply/ dura ply, marino ply ( ISI marked) including hinges, PTMT Door handle of 125mm (one hundred twenty five millimetre) long in wood colour fixed with steel screws of pryag polymer, magnitc catcher and necessary fitting complete in all respect (outer face of the cupboard shall be measured and paid for), including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 8mm (eight millimetre) thick anodised aluminium grill anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15 of approved design/ pattern with approved standard section and fixed to existing frame with CP brass/ stainless steel screws 200mm c/c (two hundred milimetre cenetre to centre) including cutting the grill to proper opening size for fixing and operation of handles and fixing with anodised aluminium standard section around the opening, all complete as per the requirement and direction of Engineer in charge, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) diametre chromium plated brass curtain rod having wall thickness of 1.25mm (one point two five millimetre) with two CP brass brackets fixed with CP Brass screws and PVC shelves etcetra, where ever required complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

300x16 mm (Three hundred into sixteen millimetre)

250x16 mm (two hundred fifty into sixteen millimetre)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

250x10 mm (two hundred fifty into ten millimetre)

100x10 mm (one hundred into ten millimetre)

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour orshade, with necessary screws etcetra Complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

125 mm (one hundred twenty five millimetre)

100 mm (one hundred millimetre)

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 65 mm (sixty five millimetre) special quality bright finished brass cup board or ward robe locks with four levers of approved quality including necessary screws etcetra Complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium hanging floor twin rubber door stopper, ISI Marked., anodised (anodic coating) not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing tripple strip vertical type Magetic catcher of approved quality in cupboard/ ward robe shutter, including fixing with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing dias and other two sides table shall be made of 19 mm (nineteen millimetre) thick commercial board including drawers, vertical partitions and cabinet work. The Table top shall be made of 25 mm (twenty five millimetre) thick commercial board. The table top , vertical portion of table towards the public side and all other sides towards sitting shall be finished with 3mm (three milllimetre) thick green panal max creative veneer VOII cherry pine up lamination to be polished in teak wood natural shade. All visible portion of commercial board shall be finished with hard wood edging of 12 mm (twelve millimetre) thick and 19 mm (nineteen millimetre) wide. The table shall have hard wood beading /edging out of 50x25 mm (fifty into twenty five millimetre) on these sides as per drawing, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing panneling of 8 mm (eight millimetre) thick teak ply over 50x31 mm (fifty into thirty one millimetre) soft wood frame at 600 mm C/C (six hundred millimetre centr to centre) with decorative teak wood beading over teak ply of size 25x12 mm (twenty five into twelve millimetre) having moulding on both side cornice/ edging on top of paneling to be finished with 55x30 mm (fifty five into thirty millimetre) teak wood beading, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing 25mm (twenty five millimetre) thick Kota stone slab flooring 55x55/ 55x27.5 cm (fifty five into fifty five oblique fifty five into twenty seven point five centimetre) of uniform colour with 7.5cm (seven point five centimetre jaisalmer yellow band as per approved shade and design laid over 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Kota stone slab 25mm (twenty five millimetre) thick in risers of steps skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Laying Precast automatic hydraulic compressed and polished terrazo tiles of NTC in flooring of size 300x300x25mm (three hundred into three hundred into twenty five millimetre) ISI Marked No. IS 1237 (50% white and 50% grey cement in white, yellow, green and maroon chips of O, B and 2B size as per approved shade. with graded marble chips of size upto 12 mm, (twelve millimetre) laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, laid on 20 mm (twenty millimetre) thick bed of cement mortar 1:4 (one cement isto four coarse sand) Medium shade pigment using 50% (fifty percent) white cement and 50% (fifty percent) ordinary cement, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Laying Precast terrazo tiles 25 mm (twenty five millimetre) thick automatic hydraulic compressed and polished of NTC of size 300x100mm (three hundred into one hundred millimetre) ISI Marked No. IS 1237 (50% (fifty percent) white and 50% (fifty percent) grey cement in white, yellow, green and maroon chips of O, B and 2B size as per approved shade. with graded marble chips of sizes upto 12 mm (twelve millimetre), in skirting and risers of steps not exceeding 30 cm (thirty centimetre) in height, on 12 mm (twelve millimetre) thick cement plaster 1:3 (one cement isto three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of Medium shade pigment using 50% (fifty percent) white cement and 50% (fifty percent) ordinary cement, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 600x600mm (six hundred into six hundred millimetre) size full body matt finish Vitrified tiles of Restile/ Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per shade and design in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm (six millimetre) thickness, including grouting of joints (Payment for grouting of joints to be made separately), including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 600x600mm (six hundred into six hundred millimetre) size full body matt finish Vitrified tiles of Restile/ Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per approved shade and design (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero decimal zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three Kilogram per square metre) including grouting the joint with white cement & matching pigments etcetra complete, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 600x600mm (six hundred into six hundred millimetre) double charge / ultra charge Vitrified tiles in flooring of Restile/ Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per approved shade and design (thickness to be specified by the manufacturer), with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm (six millimetre) thickness, including grouting of joints, and carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 600x600mm (six hundred into six hundred millimetre) size double charge / ultra charge Vitrified tiles of Restile/ Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per approved shade and design (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero decimal zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilograme per square metre) including grouting the joint with white cement & matching pigments etcetra complete, and carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 300x300mm (three hundred into three hundred millimetre) size Antiskid ceramic tiles of premium quality of Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per approved shade and design having water absorption less than 0.50% (zero decimal five zero percent) and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etcetra complete as per direction of Engineer-in- Charge, and carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 300x450mm (Three hundred into four hundred fifty millimetre) Ceramic glazed tiles of Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany tiles uto 205cm (two hundred five centimetre) height as per approved shade and design (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra complete, and carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 300x300x25 mm (three hundred into threee hundred into twenty five millimetre) labrador design ( Rainbow series) tiles flooring of NTC/ Unistone/ Atlantic/ as per approved shade laid on a bed of 20 mm (twenty millimetre) thick cement mortar 1:3 (one cement isto three sand) for ramp etcetra, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well ascu rvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing moulding, nosing and polishing etcetra all complete as specified, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Step tiles in Treads of steps of make Restile/ Nitco/ Johnson / Kajaria as per approved shade and design laid on a bed of 12 mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) including rubbing , curing and polishing etcetra all complete as specified, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Step tiles in Riser of steps of make Restile/ Nitco/ Johnson / Kajaria as per approved shade and design laid on a bed of 12 mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) including rubbing , curing and polishing etcetra all complete as specified, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying factory made chamfered edge precast Cement Concrete paver blocks 60mm (sixty millimetre) thick of NTC/ Unistone/ Atlantic/ as per approved shade and design in parking of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty milliometre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete, as per direction of Engineer-in- Charge, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Unistone slab 12.00 mm (twelve point zero millimetre) thick clading on RCC surface side on face and porch masonary wall etcetra laid on 12 mm (twelve millimetre) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scafolding etcetra complete, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero point six zero millimetre) thick pre-painted steel sheet roofing of TATA Durashine/ SAIL/ Reliance/ Jindal steel over steel trussed in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet ridge ( Factory made) having proper Gola Shape or hips of TATA Durashine/ SAIL/ Reliance/ Jindal steel 60cm (sixty centimetre) over all with 0.60mm (zero pint six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating & back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet valleys 90cm (ninety centimetre) over all 0.60mm (zero point six zero millimetre) thick prepainted sheet of TATA Durashine/ SAIL/ Reliance/ Jindal steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required, within all leads, lifts of material and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing plain M.S. B.P. sheet 2 mm (two millimeter) of TATA / SAIL/ Reliance/ Jindal steel in eaves board/facia/ soffits ceiling including cutting, fixing and welding to steel rafter, member with gas/electric welding and applying a coat of red lead primer and fixing in position complete (frame work is to be measured paid for separately), including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing of Tata / Sail / Reliance / Jindal steels 30cm (thirty centimetre) wide 25cm (twenty five centimetre) deep as per drawings and design plain G.I. sheet 0.60mm (zero point six zero millimetre) thick gutter fixed with iron brackets 40x3mm (forty into three millimetre) size bolts, nuts and washers etcetra having dome shape grating and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimetre) diametre on wall face PVC single socketed rain water pipes of working pressure 4/6 kg (four oblique six kilograme) ISI make made of finolex/ supreme/ Rel pipe (reliance) / vectus conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for PVC rain water pipes of finolex/ supreme/ Rel pipe (reliance) / vectus conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 150 mm (one hundred fifty millimetre) gap for thermal expansion, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Plain Bend 150 mm (one hundred fifty millimetre) nominal size

Plain shoes 150 mm Dia (one hundred fifty millimetre) nominal size

Providing and fixing 100 mm (one hundred millimetre) M.S. holder bat clamps of approved design to PVC rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size and cost of cutting holes and making good the walls etcetra, and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Structural steel work of TATA/ SAIL riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 595x595x6 mm (five hundred ninety five into five hundred ninety five into six millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing @ 600 mm C/C (six hundred millimetre centre to centre), including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint of Asian / Nerolac/ burger paint to give an even shade. (Two or more coat) applied @ 0.90 ltr/ 10 sqm (zero point nine zero litre oblique ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero litre oblique ten square metre) of approved brand, shade and manufacture, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

6mm (Six millimeter) thick cement plaster in ceiling with cement mortar 1:3 (One cement isto three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (one cement isto six sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for exterior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:5 (one cement isto five sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

20mm (twenty millimeter) thick Cement plaster in pattern with cement mortar 1:4 (one cement isto four sand) as shown in elevation / drawing upto floor all level including scaffolding etcetra, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Wall painting with Apex weather proof exterior shade emulsion of Asian Paints/ Nerolac Suraksha or nerolac paint/ Berger paints, Dulux paint as per approved shade to give an even shade, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying Birla white/ JK White wall putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matter finish to the surface complete including carriage of material up to any lead, lift and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Wall painting with acrylic washable emulsion paint of Asian Paints/ Nerolac Suraksha or nerolac paint/ Berger paints / Dulux paint to give an even shade, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Finishing walls with Premium emulsion paint of Asian Paints/ Nerolac Suraksha nerolac paint, Berger paints, Dulux paint of approved shade having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm (at the rate one point four three litre per ten square metre), including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing hand rail 50mm (fifty millimetre) Dia. SST hollow pipe handrail slip resistant with round ends at two levels at 75 cm & 90cm Ht. (seventy five centimetre and ninety centimetre height) welded to 25 mm (twenty five millimetre) dia SSt hollow pipe baluster. It should extend 30cm (thirty centimetre) beyond the top and bottom of the ramp as per detail of approved drawing, design, specification, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing staircase railing having hand rail of 50 mm (fifty millimetre) dia SST stainless steel pipe handrail fixed with 35 mm (thirty five millimetre) dia sst pipe as per detail in combination of 35 mm x 35mm (thirty five millimetre into thirty five millimetre) SST square pipe and 15 /20 mm (fifteen oblique twenty millimetre) sst baluster in stair case complete in all respect, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing plinth protection with 40 mm (forty millimetre) thick interlocking paver / Cement concrete paver block with 23 cm (twenty three centimetre) dia half round RCC pipe for drainage purpose fixed over 10 cm (ten centimetre) thick 1:4:8 (one cement isto four sand isto eight aggragate) cement concrete bedding / haunching for pipe, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Stone filling Tightly hand packed under floor including entire carriage of material with in all leads, lifts and other incidental and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing railing above parapet having baluster of 25 mm (twenty five millimete) Dia MS hollow pipe welded to 50 mm (fifty millimetre) dia MS hollow pipe with a clear height of 25 cm @ 30 cm c/c (twenty five centimetre at the rate thirty centimetre )center to center emended in cement concrete step and jointing with electric / gas welding at top along with hand rail of hollow MS pipe of 50 mm (fifty millimetre) dia as per the specification approved drawing and design complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth including raking out joints, with cement mortar 1:5 (one cement isto five coarse sand) and curing complete, including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Stone filling /Brick aggregate filling under soak pit including entire carriage of materials and as directed by Engineer-In-charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole cover with frame having weight 38kg (thirty eight kilograms) (single seat) including entire carriage of material within all leads, lifts and other incidentals and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (three point one five millimetre) thick, welded with angle iron in frames of 30mmx30mmx5mm, (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting sand propping etcetra, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls any thickness, within all leads, lifts and other incidentals and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M- twenty five) design mix to obtain the compressive strength of 25N/mm2 (twenty five newton per square millimeter) for reinforced cement concrete work with cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic meter or as per approved design mix for the work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetra to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables etcetra including excavation for sockets and dressing of sides, ramming of bottoms upto any depth, including getting out excavated soil and then returing the soil as required in layer not exceeding 20cm (twenty centimetre) in depth including consolidating each deposited layer by ramming, watering etcetra and disposing of surplus material / excavated soil, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing cement concrete 1:5:10 (one cement isto five sand isto ten aggregate) 40mm (forty millimetre) nominal size aggregate in bedding for PVC pipes 150mm (one hundred fifty millimetre) internal dia including necessary form work and curing complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm (ninety into ninety into one hundred centimetre) inside, size in brick work in cement mortar 1:4 (one cement isto four coarse sand) for sluice valve, with C.I. surface box 100 mm (one hundred millimetre) top diameter, 160 mm (one hundred sixty millimetre) bottom diameter and 180 mm (one hundred eighty millimetre) deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement isto two coarse sand isto four graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size ), including necessary excavation, foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded / crushed stone aggregate 40 mm (forty millimetre) nominal size ) and inside plastering with cement mortar 1:3 (one cement isto three coarse sand) 12 mm (twelve millimetre) thick, finished with a floating coat of neat cement complete, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing water lifting pump 1.00 H.P. (one horse power) of kirloskar/ cromption/Havells including all necessary fittings, and entire carriage within all leads, lifts and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra entire carriage within all leads, lifts and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing water closet orissa pan No 20090 of size 53x41 (fifty three into forty one centimetre) (Indian type W.C. pan) with 100 mm (one hundred millimetre) PVC P or S trap, 10 (ten) litre white P.V.C. low height flushing cistern havingdual flush system of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawing as per details, including flush pipe, with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white viterous china EWC water closet star S No 20087 ( S-10) (S-Ten) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimetre) with Jet pressure of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawing as per details and with 10 (ten) litre low level PVC flushing cistern (sleek plus) having dual flush system & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetre) flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white viterous china pedestial type water closet EWC of cube no 20092 of size 61.5x34.5x40 cm ( sixty one point five into thirty four point five into forty centimetre) ( European type) with Jet pressure of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawings as per details, and with 10 (ten) litre low level PVC flushing cistern ( sleek plus) having dual flush system & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white viterous china pedestial tpye water closet MATRIX EWC of Hindware/ Cera/ Jaguar of star white / snow white shade as shown in drawings as per details, with Jet pressure and , 10 (ten) litre low level PVC flushing cistern having dual flush system & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin with C.I. brackets, of NEPTUNE NO 10072 of size 50x48x86 cm ( fifty into forty eight into eighty six centimetre) with pedestial of HINDWARE / Cera/ Jaguar of star white / snow white shade as shown in drawings as per details, with mirror above with, 32 mm (thirty two millimetre) diametre C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin with C.I. brackets, of DELTA NO 10010 of size 55x40 cm (fifty five into forty centimetre) with pedestial of Hindware/ Cera / Jaguar of star white/ snow white shade as shown in drawing as per details with, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin with C.I. brackets, of MATRIX with pedestial of HINDWARE/ Cera/ Jaguar of star white/ snow white shade as shown in drawing as per details with 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin GARNET No. 10080 of size 58x43 cm ( fifty eight into forty three centimetre) ( under Counter basins) of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawing as per detail with 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetre) diametre PVC waste pipe of Finolex/ Relpipe (Reliance) vectux/ supreme for wash basin sink,including check nut, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) dia CP iron grating of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etcetra, complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600 mm (six hundred millimetre) long towel rail with total length of 645 mm, (six hundred forty five millimetre) width 78 mm (seventy eight millimetre) and effective height of 88 mm, (eighty eight millimetre) weighing not less than 190 gms (one hundred ninety gram ) of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass long nose bib cock of Continental series of Jaguar/ Contessaa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal single control of approved quality conforming to IS standards, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore CP brass stop cock ( concealed) of standred design of Continental series of Jaguar/ Contessa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing 15 mm (fifteen millimetre) nominal bore Pillar cock of Continental series of Jaguar/ Contessa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing wall mixer 15 mm (fifteen millimetre) nominal bore of Continental series of Jaguar/ Contessa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing wash basin Mixer 15mm (fifteen millimetre) nominal bore of Continental series of Jaguar/ Contessa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal , within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Stainless Steel ISI 304 (18/8) kitchen sink of Diamond / unik as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required , within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing Sink Mixer 15 mm (fifteen millimetre) nominal bore of Continental series of Jaguar/ Contessa plus series of hindware/ ocean series of Cera/ vintage series of Kerovite/ hindon series of Jal , within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm (forty five centimetre) length of Finolex/ supreme/ relpipe (Reliance) Vectus, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701of Finolex/ supreme/ relpipe (Reliance) Vectus marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, 2004 for concealed work, including cutting chases and making good the wall etectra of kitec, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

1620 ( 16mm OD Pipe)

2025 (20mm OD) Pipe

Providing and fixing 20mm (twenty millimetre) diametre G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked of Finolex/ supreme/ relpipe (Reliance) Vectus including fixing with approved adhesive etcetra Complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing PVC Single Equal Branch with oval asses ISI Marked of Finolex/ supreme/ relpipe (Reliance) Vectus insertion rubber washer 3 mm (three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing vitreous China urinal of superior quality large Flat back No 60002 of size 39x37.5x59 cm (Thirty nine into thirty seven point five into fifty nine centimetre) of Hindware/ Cera/ Jaguar of starwhite/ snow white shade including cutting holes & making good the same, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Division Plate for urinals 600x300 mm (six hundred into three hundred millimetre) Viterous China of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawing as per details, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI marked PVC Floor trap of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetra Complete for size 110x75 mm ( one hundred ten into seventy five millimetre) . of Finolex/ supreme/ relpipe (Reliance) Vectus, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. 40mm (forty millimetre) dia Grab bar of Hindware/ Cera/ Jaguar of starwhite/ snow white shade as shown in drawing as per deatills including carriage, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing PVC. holder bat clamps of ISI marked of Supreme, Finolex , Relpipe (Reliance ) , Vectus approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size and cost of cutting holes and making good the walls etcetra , within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing P.V.C. ISI marked of Supreme, Finolex , Relpipe (Reliance ) , Vectus plain bend ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing P.V.C. ISI marked of Supreme, Finolex , Relpipe (Reliance ) , Vectus plain double equal branch ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing P.V.C. ISI marked of Supreme Finolex , Relpipe (Reliance ) , Vectus Collar ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing P.V.C. ISI marked of Supreme, Finolex , Relpipe (Reliance ) , Vectus cowl ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing 32 mm (thirty two millimetre) dia C.P. brass chain and rubber plug of ISI marked is complete for sink or wash basin, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink complete, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Contessa series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing P.V.C. ISI marked of Supreme, Finolex , Relpipe (Reliance ) , Vectus heal rest including filling the joints with approved adhesive, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm Dia (seventy five millimetre) diametre

110 mm Dia (One hundred ten millimetre) diametre

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Contessa series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet of Continental series of Jaquar / Contessa series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality, within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimetre) nominal size, foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimetre) nominal size, inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) With Sewer bricks conforming to IS : 4885 each 9650.15 within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimetre) nominal size, foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm (one hundred twenty into ninety into ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) : With Sewer bricks conforming to IS : 4885 within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

SUNIL DUTT