Renovation / Remodelling of Seven (07) suits in the New Block of MLAs Hostel, Srinagar (Civil works)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.Internal Work- Exposed on wall

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer in-charge. Excluding excavation and refilling trenches after taking out the pipes. Upto 150 mm diameter.

Dismantling of flushing cistern of all types(C.I / PVC / Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and medium tensile steel bars.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm

Providing and fixing of HDF(AC 4type) flooring approved brand and quality sample to be got approved by engineer in charge at site over 4 to 6mm thick PVC Thermocoal base including providing and fixing of matching imported wooden cornice beading for edges with necessary fitting and fixture etc including all carriage complete as per direction of engineer in charge at site

Providing and fixing cabinets made of 19mm thick (BWR) ply wood inside, shelves etc front shutters shall be ply wood of 19mm thick modular type including finishing with malamine spirit polish to wall nut mirror polished finish and back with 12mm thick (BWR) ply wood, inner sides laminate of 0.8mm off white or white to all inner sides and shelves, including all brass hardware fittings, hydraulic hinges, glazing 5mm thick etc whatever required and locking arrangements (as per directions of Engineer Incharge at site) all complete (Face area of the cabinet shall be measured for payment) 600mm deep.

Providing and fixing cabinets made of 19mm thick (BWR) ply wood inside, shelves etc front shutters shall be ply wood of 19mm thick modular type including finishing with malamine spirit polish to wall nut mirror polished finish and back with 12mm thick (BWR) ply wood, inner sides laminate of 0.8mm off white or white to all inner sides and shelves, including all brass hardware fittings, hydraulic hinges, glazing 5mm thick etc whatever required and locking arrangements (as per directions of Engineer Incharge at site) all complete (Face area of the cabinet shall be measured for payment) 450mm deep.

Construction of 300 mm deep wardrobe with 19mm thick water proof ply board wherever required and 6mm thick plywood on back side and 19mm thick ply board shutters fixed with dulmica of standard make on exposed surface with all fittings and fixtures like handles, locks, catchers, telescopic drawer channels, brackets, hangers including painting with two or more coats of synthetic enamel paint etc including carriage of material all complete as per the directions of incharge at site (Face area to be measured)

Providing and fixing 0.8mm dulmica / sunmica over the ply wood including cost of SR solution including hardware fittings required complete.

Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842-2000, including top cover of 6mm coir veneer board, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.

Extra for using veneered particle board conforming to IS: 3097 Grade I, in item of pelmet 18mm thick 150mm wide.Particle board with decorative veneering on both sides.

Providing and fixing teak wood lipping of size 25x3mm in pelmet

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia ( heavy type)

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre laminated conforming to IS: 12823, Grade-I, Type-II marked

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. First class kail wood.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood

Providing and fixing of plywood in walls, ceiling or like of approved brand and manufacture with all necessary fittings and fixtures, scoldings all complete as specified and as directed by the Engineer-in-Charge including all carriages complete as specified and as directed by the Engineer-incharge.. 12mm

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge.First class kail wood.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 1500x450 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Bricks for an avg lead of 15 Km

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade (Area of slab over 0.5 sqm)

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade (Area of slab upto 0.5 sqm)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 40mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing PPR Ball valve 25mm dia nomonal bore

Providing and fixing PPR Ball valve 40mm dia nomonal bore

Providing and fixing PVC fittings (Type B) of approved quality (Prince / Finolex / Jindal / Astral ) make or equivalent complete.

PVC Pipe 100mm dia

PVC Pipe 75mm Dia

Plain bend 75mm dia

Plain bend 100mm dia

Plain Tee 75mm dia

Plain Tee 100mm dia

Door Tee 75mm dia

Door Tee 100mm dia

Collar 75mm dia

Collar 100mm dia

Floor Trap 75mm dia

Floor Trap 100mm dia

45º Bend 75mm

45º Bend 100mm

Clips 3''

Clips 4''

Providing and fixing Chromium plated sanitary fittings of approved quality (Cera, Jaquar, Parko make or equivalent) complete job.

Angle valve

Angle valve (2 in 1)

Wash basin mixer

Towel ring 20mm dia

Towel Rail Single 600mm long

Health faucet with required chain

Grating 100mm dia

Grating 75mm dia

Toilet paper Holder (Brass)

Tumbler hold

Soap case

Over head shower arm 305mm

Spindle / disc

Jet pin for W.C

Jet pin for W.C with chain tube

Leg Pair

Nipples 25mm to 50mm 15mm dia

Cup for holding brushes etc

Wall soap dispenser manual

Corner shelves

Divertor

Single lever exposed part kit of highflow divertor

Spout

Bib cock (Two way)

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PVC connections for gysers all complete job.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing of CP sink mixer of approved brand all complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.complete 100x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.150x10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete 250x16x5 mm

Providing and fixing bright finished brass handles with screws etc. complete 125 mm

Providing and fixing bright finished brass handles with screws etc. complete 100 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete.100x58x1.90 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 75x47x1.80 mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

Providing and fixing bright finished brass hard drawn hooks and eyes. 150mm

Providing and installation of Kent RO water purifers at various locations (20 LPH flow capacity)

Applying two or more coats of Ethyl silicate chemicals as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sun light by suitable means during application, all complete as per direction of the Engineerin-charge ( the rate is inclusive of all materials and labours involved except scaffolding)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying priming coat , additional coats wherever required to achieve even shade and colour. Two coats

Engagement of carpenters along with equipments for doing necessary work like easing of doors and windows and like all complete as per the directions Engineer Incharge at site all complete. (to be paid as per progress subject to the maximum of 15 No's)

Carriage of material by mechanical means from source of site.

Sand / Aggregate for an avg lead of 15 Km