Loading
Loading…
Loading…
Tender Value
₹42.3 L
EMD Value
₹84,560
Closing Date
28 Sept 2026, 6:00 pm
Harikesh Meena EE
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2026_MES_788109_1
8123
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARODA
As per tender documents
9 documents required · 9 mandatory
₹500
GE ARMY BARODA
₹84,560
Yes
8 Sept 2026
8 Sept 2026
29 Sept 2026
8 Sept 2026
28 Sept 2026
22 Sept 2026
8 Sept 2026 - 15 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. | 51 | 10 Sqm | - | - |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc.15 cm thickness (below or above ground level) and removing from site all as specified and directed. | 6 | CUM | - | - |
| 3 | M&L for 25mm thick PCC sub base in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr finished surface even andfor laying complete all as specified and as directed. | 50 | Sqm | - | - |
| 4 | M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 including necessary adhesive (Tile pattern and decoration as approved by Engineer-in-charge) | 250 | Sq m | - | - |
| 5 | M&L for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm , as in skirting etc set over and including 10 mm thick rendering with CM 1:3 including necessary adhesive (Tile pattern and decoration as approved by Engineer-in-charge) | 30 | Sq m | - | - |
| 6 | M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 including necessary adhesive (Tile pattern and decoration as approved by Engineer-in-charge) | 50 | Sq m | - | - |
| 7 | M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including 10 mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles including necessary adhesive (Tile pattern and decoration as approved by Engineer-in-charge). | 230 | Sq m | - | - |
| 8 | M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement. | 50 | Sqm | - | - |
| 9 | Demolition of reinforced cement concrete of any description and any pisition not otherwise specifically provided for , all as specified and directed. | 2.5 | Cu m | - | - |
| 10 | M&L for Providing reinforced cement concrete (nominal mix) Type B1, 1:2::4 (using 20 mm Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed. Note. (reinforcement shall be measured and paid separately) | 2.5 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
Tenderpages8123.pdf
Tender Documents • 0.66 MB
BOQ_883329.xls
BOQ • 6.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .