Providing, installation, testing and commissioning of 1 No. H.C. Pump Set having parameter 25000 GPH x 100 mtrs head at Pumping Station Manohar Gopalla under WSS Imp/Upgradation of Electro-Mech. Equipment

Amount

Providing, Installation, Testing and Commissioning of 1 No HC Pump set having Parameter 25000 GPH X 100 Mtr. Head at Pumping Station Manohar Gopalla.

Carriage of pumping machinery set from the Firm store / Divisional Store to worksite. Carriage of G.I. pipes and other allied material from Samba to work site. Job includes loading at Firm store and unloading at worksite. Stacking of material properly at worksite.

Construction of RCC Foundation Block inside the pump room for installation of pumping unit by way of first demolishing the existing foundation block inside the pump room by using heavy duty hammer, high carbon steel chisels and sledge hammer,evacuation of the material of the demolished foundation block and to finish with the reqd dimensions at Pit. Removal of the evacuted material and disposal of the same outside the pump room at a suitable place as per site condition. Laying the RCC block as per the PWD norms. Providing & fitting, Grouting & fixing of fabricated 6 No’s 3’x5/8’’ foundation bolts, placing the base frame on the block with proper levelling with the help of levelling instrument. Complete job includes cost of material and labour charges.

Placing the HC Pumpset on the top of the base frame manually with proper levelling by way of adding shims etc so that pump and motor can be coupled without any offset. Fitting of the pumpset by using heavy duty nuts, bolts and washers with proper alignment. The job includes the cost of material and labour Charges.

Fabrication of suction pipes of 6’’ dia by way of fabrication of 12mm thick M/S. Flange and fitting as per requirement at site. Providing and fitting of 6’’ dia G.I Pipe bends dully flanged as per requirement. P/F of 6’’ dia C.I Sluice valve of reputed make on suction pipe line by way of providing M.S. Flanges on its both ends. The job includes threading and welding of pipes with flanges .P/F of nuts, bolts and rubber gaskets. The complete job includes cost of material and labourcharges. ( G.I. Pipe will be provided by the department)

Fabrication of Delivery pipes of 6’’ dia by way of fabrication of 12mm thick M/S. Flange and fitting as per requirement at site. Providing and fitting of 6’’ dia G.I Pipe bends dully flanged as per requirement. P/F of 6’’ dia C.I Sluice valve of reputed make and 1 No 6’’ dia C.I reflex valve of reputed make on delivery pipe line by way of providing M.S. Flanges on its both ends. The job includes threading and welding of pipes with flanges .P/F of nuts, bolts and rubber gaskets. The complete job includes cost of material and labour charges. (G.I. Pipe will be provided by the department)

Fabrication of the panel board made out of angle iron and having a size 4’x3’.The angle iron is to welded at corner properly and flushed in all the directions including its grinding or foiling to avoid body scratches. The panel board is to be surmounted with the ply of 12 mm thickness with some other insulating material on the top. The board shall have two legs at the corners and two legs to be welded / grouted with the wall of the pump room.

Providing and fitting of 400 Amp. Main switch, HRC type 415 Volts, ISI mark and make proper electrical connections with LT Cable and PVC Cable. Complete job including cost of material and labour type.

Providing and fitting of Multistrand PVC cable ( copper ) of 19/16 PVC cable from motor of new pump to Starter (6 No Leads ) and from Starter To Main Switch (3 No Leads) .Also P/F of copper thimbles of adequate capacity, crimping of thimbles with crimping machine and taping of ends of PVC copper conductors. Complete job. (L=40Mtr)

Providing and fitting of 100 -120 HP starter (star Delta) Job includes filling of transformer oil in starter dash pot up to the required level. Fixing of starter on panel board with fasteners and making the required electrical connections.

Providing and fitting of 200 Amp MCCB ISI Mark, making connection with incoming copper wire 19/16 from main switch and outgoing to starter for automatic tripping.

Providing, Fitting and laying of 3.5 Core Armoured 120mm² Aluminium LT Cable (30 mtrs) from LT fuse box to main switch. Job also includes Providing and fitting of thimbles as of required currentcarrying capacity. Rate to be quoted per meter of LT cable including cost of carriage and labour charges.

Painting of suction and delivery pipes with superior quality enamel paint after removing dust and other unwanted material from the surface.

Testing and commissioning of pump set on load. The job includes checking of alignment during operation of pump set, abnormal sound during operation, checking of leakage on suction and delivery side and plugging of the same thereafter providing and fitting of nuts and bolts, rubber sheet whenever required.

GIANI ENGINEERING WORKS

SAMBYAL ENG AND ELECT WORKS

G S ENGINEERING WORKS

TRADE-LINKERS