REPAIR/ MAINTENANCE OF WOODEN , STEEL AND CERTAIN BRANDED FURNITURE AT VSN CHILODA

Amount

BED PLYWOOD TOP (FD-246):-

Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of IInd class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.

Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make:- Century/Kitply/Archid/National ISI Marked as approved by GE.

Removal of old wooden stiffeners and S&F IInd class Hard wood stiffeners of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.

Taking out old unsv long rail of bed plywood and providing of new long rail of IInd class hard wood of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.

REPAIR TO TABLE DRESSING LADIES (FD-251):-

Dismantling taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any position & replacement of the same with S&F new top of 18mm thick pre-laminated particle board exterior grade, BWR Make-Archid/Novapan /Greenply /Kitply ISI Marked , made to shape fixed in position with teak wood veneered on one side & other side commercial all as shown on drawing, specified and as directed by Engr-in-charge.

All as per Item No. 2.01 above but replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr in charge .Drg no FD 251/32

All as per Item No. 2.01 above but replacement of unserviceable mirror 5.5mm thick with S&F new 5mm thick mirror 365x1220x5mm thick Make Modiguard with complete frame all as shown in drawing and directed by Engr in Charge .(Drg no FD 251/32)

All as per Item No. 2.01 above but replacement of chromium plate knob 25mm dia of best quality and as approved by Engr in charge .(Drg no FD 251/32)

REPAIR TO PEG TABLE (FD-227):-

Removing unserviceable top of Peg table and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg Make-Archid/NovapanGreenply/Kitply ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken legs of peg table and S&F new legs made of IInd class hard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc.

Taking out old unserviceable/broken long rail of frame any size and S&F new rail of IInd class hard wood planned & finishing smooth of existing shape and size complete all asspecified.

All as per Item No. 3.03 above but short rail

REPAIR TO CHAIR WRITING (FD-280):- Opening of joints of damaged/ broken member of chair writing/ CBA where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge.

S&F front leg (left or right ) made out with IInd class Hard Wooden size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.

All as per Item No. 4.01 above but rear leg (left or right) all as directed by EIC.

All as per Item No. 4.01 above but back stiffener.

All as per Item No. 4.01 above but bottom stiffener.

S&F front Arms rest made out with IInd class Hard Wooden of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.

All as per Item No. 4.01 but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Re canning of chair writing.

REPAIRING TO CHAIR EASY FD- 229:- Opening of joints of damaged/ broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge.

Re-canning of chair easy.

S&F front leg (left or right ) made out with IInd class Hard Wooden of size and shape as per existing Drg all as directed by Engineer-in-Charge.

All as per Item No. 5.02 but Rear leg (left and right).

All as per Item No. 5.02 above but Arms rest.

All as per Item No. 5.02 front rail for seat.

All as per Item No. 5.02 front rail for back.

All as per Item No. 5.02 but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

REPAIR TO CHAIR DINNING FD-228/ 279:- Opening of joints of damaged/ broken member of Chair Dinning where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. all as directed by Engr-in-charge.

S&F front leg (left or right) made out with IInd class Hard Wooden of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge.

All as per Item No. 6.01 above but rear leg (left or right).

All as per Item No. 6.01 Front/Rear/Side rail of Chair Dinning all as directed by EIC.

All as per Item No. 6.01 above but back members of Chair Dinning

All as per Item No. 6.01 above but replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Re-canning of chair dining.

REPAIR TO TABLE 900 X 900 X 760MM (FD-291)

Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade Make-Archid/Novapan /Greenply /Kitply ISI Marked including 4 mm thick teak wood beading all round the table top as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable leg and S&F new leg of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

Removing of old unserviceable rail and S&F new rail of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

TABLE OFFICE CLERK WRITING (FD-275):-

Removing old unserviceable top and S&F new tops made of particle board 19mm thick commercial BWR Gde I of the size and shape a per Drg of Make-Archid/Novapan /Greenply /Kitply ISI Marked with IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc.

Removing of old unserviceable back ply of table writing and S&F new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing. Make:- Archid/ Novapan/ Greenply/ Kitply as approved by GE.

Opening joints removing old unserviceable legs of tables & S&F new legs made out with IInd class hard wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc.

REPAIR TO TEAPOY VARANDAH (FD-255):-Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

REPAIR TO TEAPOY WOODEN (FD-232/278):-

Removing unserviceable top of teapoys/Teapoy FD and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg Make-Archid/Novapan /Greenply /Kitply ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken stiffener/long rail /side rails of teapoys & S&F new stiffener/long rail /side rails made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

Removing unserviceable legs of teapoys & S&F new legs made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

REPAIR TO TABLE CENTRE (FD-235/ 274/ 375):-

Taking down old U/S top of table centre with sunmica top and S&F new top of table centre with sunmica top made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

Removing of old unserviceable long rail of Table Centre & S&F of long rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable short rail of Table Centre & S&F of new side rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable leg of Table Centre & S&F of new leg made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

REPAIR TO TABLE BED SIDE (FD-276):-

Taking down old U/S side of table bed side and S&F new sides of 18/19 mm thick pre-laminated particle board exterior grade SI marked as per existing shape and size all as specified and as directed by Engr-in-Charge.

All as per item No. 12.01 above but shelf.

Taking down old U/S back of table bed side and S&F new back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge.

Description all as per item 12.01 here in before but replacement of new aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

TABLE 900 X 600 WITH/ WITHOUT DRAWER (FD-283/284):-

Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board BWR type Gde-I 19mm thick as per Drg of Make-Archid/Novapan/ Greenply/ Kitply ISI Marked with IInd class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc).

All as per Item No. 13.01 but replacement of table frames long rail with S&F new table frames long rail made out of IInd class hard wood complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 13.01 but replacement of new drawer made out of IInd class hard wood (Teak Wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 13.01 but replacement of table frames short rail with S&F new table frames short rail made out of IInd class hard wood (Teak Wood) complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 13.01 but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 13.01 but replacement of new aluminium anodized 35mm/ 40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 13.01 but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Supply and fixing in repair new legs made out with IInd class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.

REPAIR TO TABLE DINING 6/8 PERS (FD-273/376):-

Taking out old unsv top from table dining 6 pers and supply new top of 18/19 mm thick veneered particle board solid core type (1 phase teake veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick around fixed with suitable size 6 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed.

All as per Item No. 14.01 above but Tabel Dining 8 Pers.

Taking out old unsv legs from table dining 6/8 pers and S&F new legs of hard wood all as shown on drg and directed by EIC.

Taking out old unsv long rail from table dining 6/8 pers and S&F new long rail of hard wood all as shown on drg and directed by EIC.

Taking out old unsv short rail from table dining 6/8 pers and S&F new short rail of hard wood all as shown on drg and directed by EIC.

M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following:-

Bed with ply wood top (FD-246)

Chair writing (FD-280)

Chair Easy (FD-229)

Chair dining (FD-228/279)

Table 3'x2' with & without drawer (FD-283/284)

Table writing (FD-249/275)

Side Board (FD-241/371)

Table 600x600x760mm wooden (FD-293/289)

Table dressing gents with mirror (FD-230/379)

Table dressing ladies with mirror (FD-251)

Table centre with sunmica top (FD-235/375)

Table bed side (FD-276)

Sofa Set (5 Seater) (FD-281)

Sofa Chair Single seater (FD-281)

Teapoy/ Teapoy FD (FD-232/278)

Table Peg (FD-227)

Table dining 6/8 Pers (FD-273/376)

Repair of Push Back chair TP (Branded Make Durian/Geeken/HOF/Methodex) as shown below :-

Repair and replacement of unsv tapestry fabric with lamintion seat ply 4" thick cushion , 40 density with tapestry and fixing with new tapestry fabric with lamintion seat 4" thick cushion 40 density with tapestry cloth/synthetic cover.

Repair and replacement of unsv tapestry fabric with lamintion seat Back Rest 4" thick cushion ,40 density with tapestry and fixing with new tapestry fabric with lamintion seat back rest 4" thick cushion 40 density with tapestry cloth.

Replacement of old unsv mechnism slider for auditorium chair with new mechnism slider for auditorium chair fitted.

Replacement of old unsv seat frame with new seat frame fitted.

Replacement of old unsv Back frame with new back frame fitted.

Replacement of old unsv handle M/S with fitted new handle M/S.

Replacement of old unsv PU Arm rest with fitted new PU Arm rest.

Replacement of old unsv Spring tip off up with fitted new Spring tip off up.

Replacement of old unsv Push back spring with fitted new Push Back spring.

REPAIR TO CHAIR CB STEEL WIITH/ WITH OUT ARMS (FD-75(M)):-

Removing unserviceable seats from steel chair with & w/o Arms and S&F 32mm thick IInd class hard wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and .3mm thick for seats and 3 to 3.2mm wide & 0..4mm thick border including supply of cane complete all as directed by EIC.

All as per Item No. 17.01 above but steel chair back.

Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer

S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair

S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.

REPAIR TO LOCKER STEEL (FD-257, FD-1029):-

Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engineer-in-charge.

Removing of old deshaped/broken Steel shelf and S&F new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-charge.

Removing of old broken/ unserviceable existing hasp & staples of Locker steel and S&F new Hasp & Staples of size 75x30x2mm, shape all as shown on drawing and directed by Engineer-in-charge.

Removing of old broken/ unserviceable existing handle of Locker steel and S&F new handle mild steel chromium plated Make Godraj made to shape all as shown on drawing and directed by Engineer-in-charge.

Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of OG paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-charge.

REPAIR to GI CHARPOY HARD PLY TOP (FD-220)

Removing of unserviceable plywood and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked make Kit Ply/Green Ply/Duro complete all as per specified and as direction by Engr-in-charge.

Removing of unserviceable elbow of charpoi GI pipe and s&f three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.

Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitabkle for charpoi GI pipe 32mm bore Med grade complete all as specified & directed.

M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing (GI pipe make : TATA Jindal).

Taking out existing old broken long rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 23(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.

Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 19.05 and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and complete all as specified and directed by engineer-in-Charge.

Repair of Chair Executive Revolving H/B (Branded Make Durian/Godrej/HOF/Gekeen/methodex) as shown below :-

Repair and replacement of unsv seat PVC 4" thick cushion with 40 density with tapestry and fixing with new seat PVC 4" thick cushion with 40 density with tapesty cloth/synthetic cover.

Repair and replacement of unsv Back Rest PVC 4" thick cushion with 40 density with tapestry and fixing with new back rest PVC 4" thick cushion with 40 density with tapestry cloth/synthetic cover.

Replacement of unsv old cover for seat & back stiched with new cover stiched for seat and back.

Welding in repair not exceeding 6mm thick MS sheet and not exceeding 2.5cm in length.

Replacement of old unsv coster wheel with new coster wheel fitted.

Oiling, greasing, and leveling of the revolving system,and render the mechnism serviceable.

Replacement of old unsv handle with fitted new handle.

Replacement of old unsv base and fixing of new base.

Replacement of old unsv hydraulic cylinder with fixing new hydraulic cylinder.

REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHELF (FD-67M FD-1031 FD-1033)

Removing of old unserviceable 3 way locking device complete of Almirah Large steel and S&F new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-charge.

Removing of existing old locks of Almirah Large steel and S&F new locks of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-charge. Make:-as approved by GE.

Removing of existing old unserviceable handles including necessary nut, bolts, washer etc of Almirah large steel and S&F new chromium plated handles Make Godraj including necessary nut, bolts, washer etc all as specified & directed by Engr- in- Charge.

Taking out existing shelves and refixing in position including necessary nuts, bolts, washers, clips etc for Almirah large steel all as directed by Engineer-in-charge.

Removing of old unserviceable legs of Almirah large steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-charge.

Removing of existing old unserviceable shelves of Almirah large steel and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge.

REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/WITHOUT DRAWER (FD-1008):-

Taking down old U/S top of table steel 900 X 600 X 760 mm with drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing existing unserviceable parts of table 900 x 600x760mm Steel (with drawer) and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge.

Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

Chair Verandah (FD-256):- Re-Canning with existing type/ size of plastic cane complete.

Repair of Chair computer (Branded Make Durian/Godrej/HOF/Gekeen/methodex) as shown below :-

Repair and replacement of unsv seat PVC 2" thick cushion with 40 density with tapestry and fixing with new seat PVC 2" thick cushion with 40 density with tapesty cloth/synthetic cover.

Repair and replacement of unsv Back Rest 2" thick cushion with 40 density with tapestry and fixing with new back rest 2" thick cushion with 40 density with tapestry cloth/synthetic cover.

Replacement of unsv old cover for seat & back stiched with new cover stiched for seat and back.

Welding in repair not exceeding 6mm thick MS sheet and not exceeding 2.5cm in length.

Replacement of old unsv coster wheel with new coster wheel fitted.

Oiling, greasing, and leveling of the revolving system,and render the mechnism serviceable.

Replacement of old unsv handle with fitted new handle.

Replacement of old unsv base and fixing of new base.

Replacement of old unsv hydraulic cylinder with fixing new hydraulic cylinder.

REPAIR TO ALMIRAH MEDIUM STEEL (FD-1032, FD-243):-

All as per Srl Item No 21.01 here-in-before but Almirah Medium Steel.

All as per Srl Item No 21.02 here-in-before but Almirah Medium Steel

All as per Srl Item No 21.03 here-in-before but Almirah Medium Steel

All as per Srl Item No 21.04 here-in-before but Almirah Medium Steel

All as per Srl Item No 21.05 here-in-before but Almirah Medium Steel

All as per Srl Item No 21.06 here-in-before but Almirah Medium Steel

REPAIR TO SOFA SET 5 SEATER (FD-281):-

Removing of existing U/S cushion from sofa set five seater and S&F new foam cushion Make-sleepwell/Godrej 95 to 100 mm thick 32/40 density duly covered with superior quality tapestry cloth (Not less than Rs. 250/P Mtr) as directed by Engr-in-Charge.

Removing of existing old tapestry cover from cushion for sofa set five seater and S&F new tepestry cover and tapestry cloth (Not less than Rs. 250/P Mtr) as directed by Engr-in-Charge.

Removing of existing U/S front/rear rail wooden of sofa set 5 seater and S&F new Front/Rear wooden rail made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

Removing of existing U/S stiffner/bearer wooden and S&F new stiffner/bearer wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

Removing of existing U/S Arm rest wooden and S&F new Arm rest wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

Repair of Chair Visitors (Branded Make Durian/Godrej/HOF/Gekeen/methodex) as shown below :-

Repair and replacement of unsv seat ply 2" thick cushion with 40 density with tapestry and fixing with new seat ply 2" thick cushion with 40 density with tapestry cloth

Repair and replacement of unsv Back Rest ply 2" thick cushion with 40 density with tapestry and fixing with new back rest ply 2" thick cushion 40 density with tapestry cloth

Replacement of unsv old cover for seat & back stiched with new cover stiched for seat and back.

Welding in repair not exceeding 6mm thick MS sheet and not exceeding 2.5 cm in length.

Replacement of old unsv handle with fitted new handle.

Repair of Chair Executive Revolving LB/MB (Branded Make Durian/Godrej/HOF/Gekeen/methodex) as shown below :-

Repair and replacement of unsv seat PVC 4" thick cushion with 40 density with tapestry and fixing with new seat PVC 4" thick cushion with 40 density with tapesty cloth/synthetic cover.

Repair and replacement of unsv Back Rest PVC 4" thick cushion with 40 density with tapestry and fixing with new back rest PVC 4" thick cushion with 40 density with tapestry cloth/synthetic cover.

Replacement of unsv old cover for seat & back stiched with new cover stiched for seat and back.

Welding in repair not exceeding 6mm thick MS sheet and not exceeding 2.5cm in length.

Replacement of old unsv coster wheel with new coster wheel fitted.

Oiling, greasing, and leveling of the revolving system,and render the mechnism serviceable.

Replacement of old unsv handle with fitted new handle.

Replacement of old unsv base and fixing of new base.

Replacement of old unsv hyd cyl with fixing new hyd cylinder

Replacement of Tapestry Cover for Cushion with special quality of tapestry of Sofa three seater as per sample as approved by GE / Engr - in - charge.

Dry wash of Chair executive high back with shampoo and chemical clean and vaccum dry

Replacement of Tapestry Cover for Cushion with special quality of tapestry of Sofa two Seater as per sample as approved by GE / Engr - in - charge.

Dry wash of Chair Visitor with shampoo and chemical clean and vaccum dry.

Dry wash of Sofa set 5 seater(3+1+1) at site with chemical clean and vaccum dry.

Dry wash of Chair Computer with shampoo and chemical clean and vaccum dry.

Replacement of Tapestry Cover for Cushion with special quality of tapestry of Sofa five (3+1+1 )Seater as per sample as approved by GE / Engr - in - charge.

REPAIR TO TABLE STEEL 900 X 900 X 760 MM (FD-1009):-

Removing of U/S top and S & F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white make Novapan/Bhutan Board/ Kitply/Decco / Mysore with 4 mm thickT.W. beading all-round the table steel 900x900x760mm

Removing existing unserviceable parts of table 900 x 900x760mm Steel and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge.

Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

Replacement of Tapestry Cover for Cushion with special quality of tapestry of Sofa single Seater as per sample as approved by GE / Engr - in - charge.

Repairs for sofa set 5 seater spl (3+1+1) (Branded Make Durian/Godrej/HOF/Gekeen/methodex) replacing rexene and foam with cushion of 40 density 100mm thick for seat and back rest same shall be covered with approved qyality of rexine tapestry and fix to sofa set 5 seater and all as approved GE / Engr-in-charge.

Dry wash of Sofa single seater at site with chemical clean and vacuum dry.

TABLE OFFICE OFFICER/ CLERK STEEL (FD-1004):-

Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x900mm 18/19 mm pre-laminated partical board exterior grade Make- Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.

Taking out U/S Top from Table office offrs steel and S&F new top of size 1800x1200mm 18/19 mm pre-laminated partical board exterior grade Make-Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.

Taking out unserviceable locks and S&F new brass locks after repairing of drawer and cupboard of table office clerk steel size and shape as per Drg as directed by Engr-in Charge.

Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

REPAIR TO TABLE COMPUTER (FD/E6/MAP/03):-

Taking out U/S Top from Table computer and S&F new top of size 1200x600mm 18/19 mm pre-laminated partical board exterior grade Make- Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.

Taking out unserviceable locks and S&F new brass locks after repairing of drawer and cupboard of table computer size and shape as per Drg as directed by Engr-in Charge.

Taking out old U/S drawer channel patti and S&F new drawer channal patti as specified and shown on Drg and directed by Engr-in-Charge.

Taking out old U/S key board channel patti and S&F new key board channal patti as specified and shown on Drg and directed by Engr-in-Charge.

Taking out old U/S Handle 100 mm and S &F New Handle 100 mm of table computer as specified and shown on Drg and directed by Engr-in-Charge.

M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) incl preparation of surface all as directed by EIC for the following :-

Table office clerk steel.

Table Office officers steel.

Teapoy varandah.

Table 900X600 steel with drawer.

Table steel 900X900mm.

Chair CB steel with or without arms.

Almirah large steel with shelves.

Almirah med steel with shelves.

Book case steel.

Locker steel.

Chair varandah.

Vinayak Distributors