GENERAL District Police Head Quarters Providing truss roof for District Police Head Quarters Alappuzha General Civil Work

Amount

Detailed Estimate

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

50.4.1.1:Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

OD229415/2023-2024:Supplying and fixing 160 mm PVC pathy 2.5 kg/cm2 for gutter including 25x6 mm thick MS clamp at 75 cm c/c including all cost and labour charges etc. completed

OD229458/2023-2024:Engaging coolie for cleaning

SEBASTIAN ABRAHAM

BAIJU V

PT.Sebastian

ABDUL RAHIMAN NISSAMUDEEN

SUNREL CEMENTS PVT LTD

REJAKUMAR

jibin joseph

Bidder Name

BAIJU V

PT.Sebastian

PT APPACHAN

SEBASTIAN ABRAHAM

REJAKUMAR

jibin joseph

ABDUL RAHIMAN NISSAMUDEEN

SUNREL CEMENTS PVT LTD