Construction of New Room in Puni Primary School At Village Puni, Tal. Palsana, Dist. Surat.

BILL OF QUANTITIES

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful 60.50 CMT. 122.93

materials and disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft soil

2 Excavation for foundation upto 1.5 m to 3.0 m depth including sorting out and stacking of 34.00 CMT. 136.47

useful materials and disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft

3 Filling available excavated earth (Including rock in trenches plinth, sides of foundations etc. in 81.00 CMT. 136.91

layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and

4 Providing & filling in plinth with murrum or yellow soil or selected soil in layers of 20 cm. 25.00 CMT. 301.77

Thickness. Incl. watering, ramming & consolidation etc. complete.

5 Filling in plinth with sand under floors including watering ramming, consolidating and 8.50 CMT. 481.80

dressing complete

6 Providing and laying cement concrete 1:2:4 (1-Cement : 2- coarse sand : 4- hand Machine 10.50 CMT. 3923.85

crushed stone aggregates 40 mmnominal size) and curing complete including cost of

formwork in (A) PCC

7 Providing and laying controlled cement concrete M.250 and curing complete inculding the 9.00 CMT. 4494.50

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in

foundation, footings base of column and mass concrete. (A) Footing

8 Providing and laying controlled cement concrete M.250 and curing complete inculding the 2.50 CMT. 8226.45

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in All

Types of Column D) Column, Pillers, posts and struts , upto Plinth

9 Providing and laying controlled cement concrete M.200 and curing complete inculding the 3.00 CMT. 8191.10

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in All

Types of Column D) Column, Pillers, posts and struts, upto Ground Floor

10 Providing & filling in plinth with murrum or yellow soil or selected soil in layers of 20 cm. 1.00 CMT. 8232.05

Thickness. Incl. watering, ramming & consolidation etc. complete.

11 Providing and laying controlled cement concrete M.250 and curing complete inculding the 4.50 CMT. 6440.77

cost of formwork but Excluding the cost of the cost of reinforcement for reinforced concrete

work in Beams. (E) Beam, upto Plinth

12 Providing and laying controlled cement concrete M.200 and curing complete inculding the 5.50 CMT. 6406.43

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in All

Types of Beams,(E) Beam, Ground Floor

13 Providing and laying controlled cement concrete M.200 and curing complete inculding the 6.50 CMT. 6351.89

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in All

Types of Slab,All Thickness (C) Slab upto Plinth and Ground Floor

14 Providing and laying controlled cement concrete M.200 and curing complete inculding the 1.00 CMT. 6758.92

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in All

Thickness in Walls PARDI Ground Floor

15 Providing and laying controlled cement concrete M.200 and curing complete inculding the 0.50 CMT. 5949.91

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in Lintel

upto Ground Floor

16 Providing and laying controlled cement concrete M.200 and curing complete inculding the 1.00 CMT. 5738.82

cost of formwork but Excluding the cost of reinforcement for reinforced concrete work in

Chajja. Upto Ground Floor

17 Providing and fixing TMT bars Fe-500D steel reinforcement for R.C.C. work including binding, 4145.50 Kg 77.34

bending and placing in position complete upto floor two level ,Ground Floor, First Floor

Second Floor, Third Floor, Terrace Floor (all floor).

18 Applying general insecticide pest control treatment to floors, cupboards etc including labour 55.50 sq.mt 91.62

material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight

0.50 percent is recommended one litre chemical emulsion dillute with

19 Brick work using common brunt clay building bricks having crushing strength not less than 35 4.50 CMT. 4214.32

kg/sqcm. in foundation and plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Ground floor upto Plinth

20 Brick work using common brunt clay building bricks having crushing strength not less than 35 22.50 CMT. 4503.04

kg/sqcm. in superstructure above plinth level upto floor two level in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B) Conventional Ground Floor

21 Brick work using common brunt clay building bricks having crushing strength not less than 35 5.50 CMT. 4545.16

kg/sqcm. in superstructure above plinth level upto floor two level in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B) Conventional First Floor

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or 79.50 sqmt 161.19

Full/half brick walls for interior plastering upto floor two level and finished even and smooth in

(ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor

23 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or 23.50 sqmt 185.75

Full/half brick walls for interior plastering upto floor two level and finished even and smooth in

(ii) Cement mortar 1:4 (1-cement :4-sand) First Floor

24 Providing & laying10 mm. thick cement plaster in single coat on fair side of ceilings for 48.50 sqmt 148.31

interior plastering upto floor two level and finishing with smooth mala plaster.(i) Cement

mortar 1:4 (1 cement : 4 sand) Ground Floor

25 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level 127.00 sqmt 315.68

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Upto Ground Floor to

26 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 16.00 Rmt 44.27

27 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor 16.00 Rmt 35.35

28 Providing and laying polished Granite Slab 18mm thick in Flooring laid 20mm thick Cement 5.00 sqmt 2377.54

Mortar 1:4 (1-Cement : 4-Coarse Sand) and jointed with Grey Cement Slurry including full

molded round front edges , rubbing and polishing etc. complete.

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

29 Providing and laying polished Granite Slab 18mm thick in Risers of steps Dedo, window sill, 19.50 sqmt 2408.85

jembs and pillars laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) and jointed

with Grey Cement Slurry including full molded round edges , rubbing an

30 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and 42.00 sqmt 1322.96

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

31 Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and 3.00 sqmt 1397.02

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry,Soluble Salt Vitrified Tiles Flooring.

32 Providing and fixing 37 mm thick flush door both sides laminated andshutter fabricated from 3.00 sqmt 3767.30

35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 gra

33 Providing and fixing window having extruded aluminum Colour anodized section frame main 5.63 sqmt 1583.95

outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc

34 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required 168.80 Kg 111.60

spacing and frame alround square or round headed bolts and nuts or by screws.including

applying a priming coat of red lead paint and two coats of oil painting

35 Applying two coats of Birla (white cement based) or (acrylic lapy- putty) or equivalent & two 151.50 sqmt 40.59

coats of primer of approved brand and manufacture on new wall surface,Ceiling surface to

give an even shade including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

36 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on 151.50 sqmt 84.35

undecorated wall surface,Ceiling surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign matter and sand papered smooth.

37 Providing & applying single coat of textured at external surface at all floor levels with three 127.00 sqmt 515.10

coats of weather proof cement exterior paint of approved standard brands make at outer side

of the building on RCC or Masonary walls. Rate to include for all labour, materials, staging,

scaffolding, cleaing, curing etc. application of texture after throughly brushing th`e surface to

give an even shade free from mortar dropping/other foreign matter etc. complete. application

of textures & paints must be as per company's standard instructions. Texture and colour

selection as per approved by engineer in charge.(It is recommended to use low voc paints

rated by IGBC),Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials.etc complete

38 Applying priming coat over new steel and other metel surface after and including preparing the 12.50 sqmt 128.62

surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red

lead. and Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the surface an

even shade including cleanicn the surface of all dirt, dust and other foreign matter.

39 Steel work welded in built up sections, framed work including cutting, hoisting, fixing in 0.98 Qntl 9108.48

position and applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees, flats with connecting plates or angle

40 Providing and fixing in position callapsible steel shutters with vertical channels 20 x 10 x 2 mm 3.50 sqmt 6078.18

braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x

mm with 38mm dia, steel pulleys complete with bolts, nuts, locki

41 Providing and laying integral cement based water proofing treatment including preparation of 42.00 Sqmt 880.72

surface as required for treatment of roofs, balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with proprietary water proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 & top smooth finished with trowel with

false chequered marking of 300 mm.size.The treatment is carried along the vertical surface of

the parapet & other adjoining wall up to height of about 300 mm in a shape of quarter round

vata Incl. curing etc. Comp. With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.) NOTE :- (1) The

whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed. Unit

Rate of 1 Sq.Mt.

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

42 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm 42.00 Sqmt 779.69

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

43 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming 4.00 Rmt 878.56

to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen in figures And words) of

the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 11,74,639.83/- Estimated Amount Put to tender. 11,74,639.83/-

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer, Executive Engineer

Panchayat ( R&B) Sub Division, Panchayat ( R&B) Division