Loading
Loading…
Loading…
Tender Value
₹18.4 L
EMD Value
₹36,900
Closing Date
3 Jul 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEGTVC
12 conditions · 1 needing a document upload
For electrical works, the contractor should have a valid electrical contractor license from the concerned statutory authority of any state of India. The electrical license should be in the name of the firm's or in the name of any authorized person of the tenderers firm. It must be ensured that the validity of electrical license should be valid during the entire contract period duly renewing at appropriate time for extending validity. If the tenderer hired the electrical license, authorization of the same should be submitted. 1)In case of other than Company/ Proprietary firm, Annexure - V(A) shall also be submitted by each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested /digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
13 conditions · 1 needing a document upload
All the tenderers/Contractors have to deposit full earnest money and tender document cost as stipulated for the tender, through online modes as permitted in IREPS application through multiple banks net banking, debit and credit cards . All documents related to Partnership deed/Joint venture/ Consortium/ MOU, duly signed by the notary public, should be uploaded failing which offer will be summarily rejected.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions , explanatory notes of schedule of work and Annexures.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
Manual submission of EMD and cost of tender form cannot be entertained/Considered and hence no need of uploading the scanned copy of financial instruments
Whether GST registration available or not?
The contractor has to submit the EPF Code as per the EPFO Act and also has to submit a statement in this regard before signing the contract agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bidder has to fill in his quoted rate against each item in the Bid rate / Unit rate column. The bidding rate is Rs./ unit, the bidder has to quote his rate for the individual item only
Subsequent to the enforcement of GST Act, the modifications to Para-(a),clause 6, part I of Indian Railways Standard General condition of contract, July 2014 vide Railway Board letter No: 2017/CE/CT/4/GST(a) of 23/6/2017 is as detailed below: Clause No.6 - Care in submission of Tenders: (a)(i) Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer. (ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017 (CGST)/ Integrated Goods and Services Tax Act, 2017 (IGST)/Union Territory Goods and Services Tax Act, 2017 (UTGST)/respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to Railway immediately after the award of contract, without which no payment shall be release to the contractor. The contractor shall be responsible for deposition of applicable to the concerned authority. iv) In case the successful tenderer not able to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. The contractor is liable to pay the taxes as stipulated in the GST Act and Rules and also should furnish the details of GST to deduct from the contractor's bill.
Trivandrum Divn: Modernization of S&T branch in Divisional Office Complex - Electrical arrangement
V-EG-OT-11-2026-2027
V-EG-OT-11-2026-2027
Open
Works - General
180 Days
Thiruvananthapuram, Kerala
₹0
₹36,900
3 Jul 2026
9 Jun 2026
19 Jun 2026
103 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 18,44,279.4 | ||
| — | 38.00 | — | — | ||
| Supply &Fixing of 18 Watts round/square LED recessed luminaire including supply connection by PVC insulated copper cable | — | — | — | 21,207.8 | |
| — | 28.00 | — | — | ||
| Supply & fixing of energy efficient BEE 5 Star rated BLDC ceiling fan 1200mm sweep with 3 blades suitable to operate in 230V 50Hz single phase AC supply with 2 canopies and 300mm down rod, Power consumption: 28W (max.), Voltage range - 140 to 240V, Air delivery (minimum) - 220 Cu m/min, Replacement warranty (minimum): 5 years, Power factror: 0.9 (min.) Total harmonic distortion: 20% (max.), Rated service value (in m3/min/watt):> 6.0 with electronic regulator and IR remote. Availability of performnce and type test report from Govt. Lab/NABL/ILAC as per IS 374:2019 or latest. Fan should comply to IS 374:2019 or latest. Blade thickness: 1.1 mm, Blade material: Aluminium, Bearing: Double ball bearing, Shank Thickness (min): 2mm, Shackle thickness (min): 2mm | — | — | — | 71,372 | |
| — | 10.00 | — | — | ||
| Supply & fixing of 18/20 watts box type 4 feet LED battern wall mounting with tube light complete with integral driver unit with 5 years replaceable warranty including supply connection by 3 core 1.5 sqmm PVC insulated copper cable | — | — | — | 3,600 | |
| — | 28.00 | — | — | ||
| Supply & fixing of fan hooks duly welding to the roof structure | — | — | — | 11,032 | |
| — | 35.00 | — | — | ||
| Supply & fixing of 18/20 mm dia medium duty GI pipe as down rod for ceiling fan in the fan hooks | — | — | — | 6,650 | |
| — | 1100.00 | — | — | ||
| Supply & fixing/concealing of ISI marked PVC pipe 19/20mm dia, 1.4mm thick confirming to IS 9537 (Part 3) complete with bend, Ts, junction boxes etc. in wall/truss work of false ceiling | — | — | — | 89,100 | |
| — | 200.00 | — | — | ||
| Supply & fixing/concealing of ISI marked PVC pipe 25mm dia x 2.0mm thick confirming to IS 9537 (Part 3) complete with bend, Ts, junction boxes etc.in wall/truss work of false ceiling | — | — | — | 18,200 | |
| — | 50.00 | — | — | ||
| Supply & concealing/fixing of PVC conduit 32mm dia x 2.5 mm thick confirming to IS 9537 (Part 3) complete with bend, Ts, junction boxes etc. .in wall/truss work of false ceiling | — | — | — | 7,900 | |
| — | 200.00 | — | — | ||
| Supply & fixing of PVC flexible conduit 22 mm dia in truss work/inside the walls of modular works stations | — | — | — | 45,000 | |
| — | 150.00 | — | — | ||
| Supply & laying of ISI marked PVC pipe 25mm dia x 2.0mm thick confirming to IS 9537 (Part 3) complete with bend, Ts, junction boxes etc. duly cutting groove of 6 cm deep, 3 cm wide in the concrete floor and re-concreting of the cut portion of the floor | — | — | — | 48,000 | |
| — | 500.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 2.5 sq.mm three runs (1 run as earth wire) through PVC conduit including termination in a standard manner as required at site (supply & drawing of three runs of 2.5 sqmm is treated as 1 Metre) | — | — | — | 70,500 | |
| — | 120.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 4.0 sq.mm three runs (1 run as earth wire) through the PVC conduit including termination in a standard manner as required at site (supply & drawing of three runs of 4.0 sqmm is treated as 1 Metre) | — | — | — | 25,200 | |
| — | 120.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 6.0 sq.mm three runs (1 run as earth wire with green colour) through PVC conduit including termination in a standard manner as required at site (supply & drawing of three runs of 6.0 sqmm is treated as 1 Metre) | — | — | — | 27,720 | |
| — | 120.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 6.0 sq.mm five runs (1 run as earth wire with green colour) through PVC conduit including termination in a standard manner as required at site (supply & drawing of five runs of 6.0 sqmm is treated as 1 Metre) | — | — | — | 46,200 | |
| — | 50.00 | — | — | ||
| Supply and drawing of 2 runs of 16.0 sq.mm PVC insulated copper cable through PVC conduit including termination in a standard manner as required at site (supply & drawing of two runs will be treated as 1 Metre) | — | — | — | 19,500 | |
| — | 25.00 | — | — | ||
| Supply & drawing of 10 SWG copper wire through PVC conduit including termination in a standard manner | — | — | — | 3,125 | |
| — | 10.00 | — | — | ||
| Supply and laying/fixing of copper earth strip of size 25X3 mm and termination as required at site | — | — | — | 13,200 | |
| — | 520.80 | — | — | ||
| Supply & sinlge phase wiring to light/fan/LED board/call bell points by means of 2 Nos. of 1.5 Sq.mm (P&N) and 1 No. of 1.5 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR-LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through PVC pipe mentioned and termination on suitable junction box duly fitted with ceiling rose/connector as per site condition (3 runs of 1.5 sqmm for 1 Metre will be treated as 1 Metre for measurement) | — | — | — | 47,913.6 | |
| — | 6.00 | — | — | ||
| Supply & fixing/concealing of 12 module metal box with front plate in a concealed manner | — | — | — | 5,340 | |
| — | 6.00 | — | — | ||
| Supply & fixing/concealing of 8 module metal box with front plate in a concealed manner | — | — | — | 3,426 | |
| — | 4.00 | — | — | ||
| Supply & fixing/concealing of 6 module metal box with front plate in a concealed manner | — | — | — | 1,876 | |
| — | 4.00 | — | — | ||
| Supply & fixing of 4 module metal box with front plate in a concealed manner | — | — | — | 1,572 | |
| — | 100.00 | — | — | ||
| Supply & fixing/concealing of 6 module plastic box with front plate in a concealed manner | — | — | — | 36,600 | |
| — | 24.00 | — | — | ||
| Supply & fixing of 1 module modular blanking plate in the modular box | — | — | — | 1,008 | |
| — | 290.00 | — | — | ||
| Supply & fixing of 5/6A single pole modular switch in the modular box | — | — | — | 28,420 | |
| — | 214.00 | — | — | ||
| Supply & fixing of 5/6A 2 module plug socket in the modular box | — | — | — | 39,590 | |
| — | 6.00 | — | — | ||
| Supply & fixing of 15/16 A modular switch in the modular box | — | — | — | 1,014 | |
| — | 6.00 | — | — | ||
| Supply & fixing of two module 15/16 A modular plug socket in the modular box | — | — | — | 1,278 | |
| — | 4.00 | — | — | ||
| Supply & fixing of single module 6A bell push switch in the modular box | — | — | — | 424 | |
| — | 3.00 | — | — | ||
| Supply & fixing/concealing of single phase 20A MCB protected socket duly fitted with 1 No 20 A SP MCB. The MCB used shall be IS/IEC certified | — | — | — | 2,988 | |
| — | 1.00 | — | — | ||
| Supply & fixing/concealing of single phase 25A MCB protected socket duly fitted with 1 No 25 A SP MCB. The MCB used shall be IS/IEC certified | — | — | — | 1,096 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of 3 phase, 6 way, vertical, double door IP 43 protected, CRCA sheet manufactured, powder coated MCCB distribution board suitable for incomer up to 125A MCCB complete with suitable capacity insulated vertical phase bus bars for phase and neutral, earth bars, shrouds, cement spill protector, color coded inter-connecting wire sets, cable ties, cable end box etc. including earth connection and termination of LTUG cable. All cables should be properly terminated in tin coated copper lug | — | — | — | 14,848 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of 3 phase, 4 way, vertical, double door IP 43 protected, CRCA sheet manufactured, powder coated MCCB distribution board suitable for incomer up to 125A MCCB complete with suitable capacity insulated vertical phase bus bars for phase and neutral, earth bars, shrouds, cement spill protector, color coded inter-connecting wire sets, cable ties, cable end box etc. including earth connection and termination of LTUG cable. All cables should be properly terminated in tin coated copper lug | — | — | — | 13,360 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of 3 phase, 4 way, double door IP 43 Protected, CRCA sheet manufactured, powder coated MCB distribution board (8+12 module) complete with insulated phase bus bars/neutral bars with shrouds, earth bars, cement spill protector etc. completely prewired. All cables should be properly terminated in tin coated copper lug | — | — | — | 34,056 | |
| — | 7.00 | — | — | ||
| Supply, erection, testing and commissioning of single phase, 12 way, double door IP 43 protected, CRCA sheet manufactured, powder coated MCB distribution board complete with insulated phase bus bars/neutral bars with shrouds, earth bars, cement spill protector etc. completely prewired All cables should be properly terminated in tin coated copper lug | — | — | — | 25,956 | |
| — | 2.00 | — | — | ||
| Supply & fixing of IS/IEC certified 125A 25kA 4 pole MCCB in the DB | — | — | — | 22,930 | |
| — | 6.00 | — | — | ||
| Supply & fixing of IS/IEC certified 63A 4 Pole MCB in the DB | — | — | — | 12,966 | |
| — | 7.00 | — | — | ||
| Supply & fixing of IS/IEC certified 40A DP MCB in the DB | — | — | — | 8,015 | |
| — | 8.00 | — | — | ||
| Supply & fixing of IS/IEC certified 40A SP MCB in the DB | — | — | — | 4,200 | |
| — | 2.00 | — | — | ||
| Supply & fixing of IS/IEC certified 25A SP MCB in the DB | — | — | — | 480 | |
| — | 5.00 | — | — | ||
| Supply & fixing of IS/IEC certified 20A SP MCB in the DB | — | — | — | 1,200 | |
| — | 9.00 | — | — | ||
| Supply & fixing of IS/IEC certified 16A SP MCB in the DB | — | — | — | 2,160 | |
| — | 88.00 | — | — | ||
| Supply & fixing of IS/IEC certified 6A SP MCB in the DB | — | — | — | 21,120 | |
| — | 150.00 | — | — | ||
| Fabrication, supply & fixing of MS cable tray of 60cm width using 40mmX40mmX6mm MS L-angle on both sides and 2 Nos. of 20mmX6mm MS flat provided at a spcing of 40cm including suitable fixing arrangement in wall/ceiling duly arranging temporary scaffolding | — | — | — | 3,97,500 | |
| — | 100.00 | — | — | ||
| Supply, transportation and stacking of hot dip galvanized cable tray having size 250mm wide and 50mm high fabricated with 2mm thick sheet steel | — | — | — | 97,010 | |
| — | 100.00 | — | — | ||
| Fixing the cable tray in the support including supply & fixing of interconnection supports, bolts, nuts etc. | — | — | — | 11,663 | |
| — | 25.00 | — | — | ||
| Supply of GI bracket support with all accessories and fixing of supports/cable tray in a required manner | — | — | — | 6,540 | |
| — | 1.00 | — | — | ||
| Releasing the existing wiring in S&T branch as instructed by SSE in-charge and handing over the dismantled wiring to SSE/E/P/TVC | — | — | — | 7,029 | |
| — | 1.00 | — | — | ||
| Supply, installation and commissioning of BEE 5 star rated, 2 Ton +/- 2% capacity, inverter type split air conditioner | — | — | — | 46,485 | |
| — | 3.00 | — | — | ||
| Supply, installation and commissioning of BEE 5 star rated, 1.5 Ton +/- 2% capacity, inverter type split air conditioner | — | — | — | 1,08,375 | |
| — | 2.00 | — | — | ||
| Supply & installation of on-line 5 KVA UPS with 120 minutes battery back up with single phase or three phase input & single phase output suitable for the use of computers and having 2 years warranty and output shall be pure sine wave. | — | — | — | 3,08,334 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .