Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹17.3 L
EMD Value
₹34,600
Closing Date
3 Aug 2024, 4:00 pmClosed
Executive Engineer Jal Shakti PHE Division Samba
Executive Engineer Jal Shakti PHE Division Samba
Please refer BoQ
2024_PHE_254322_1
PHES/34 of 2024-25 Dt.26-07-2024
Open Tender
Civil Works - Water Works
Item Rate
60 days
Bari- Brahmana
Please refer e-NIT/ tender documents
2 documents required · 2 mandatory
₹500
Executive Engineer Jal Shakti PHE Division Samba
₹34,600
18 Nov 2024
26 Jul 2024
5 Aug 2024
26 Jul 2024
3 Aug 2024
26 Jul 2024
Amount
E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centering ,shuttering finishing and reinforcement . All work upto plinth level in 1:1½:3 (1 cement: 1½ coarse sand : 3 graded stone aggregate 20mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)
Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement 4 coarse sand) Parapit
Extra for Half Brick work masonry in superstructure above plinth level upto floor V level
Providing and fixing hexagonal MS Sheet ceiling fan box with clamp of dia 140 mm , 73 mm height, 3 mm thick rim, top and bottom lid of 1.5 mm MS sheet lid shall be screwed into M. S. box by means of 3 mm round headed screw etc.
Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces
Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel promer all complete. Fixed to steel windows by welding
Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more
Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies, door lintels, window lintels, Gate pillars and access platforms.
Edges of slabs and breaks in floors and walls under 20 cm wide
12mm Cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
6mm Cement plaster to ceiling of mix 1:3 (1 cement: 3 coarse sand)
15mm thick Cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand)
Painting top of roof with bitumen of approved quality at 17 kg/ 10sqm impregenates with a cost of coarse sand at 60 cudm per 10 sqm including clening the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finishing neat. With machine moulded Common burnt clay (Non modular) brick tiles of class designation 10.0
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.
Supply and filling by wayof earth work in structure and levelling the ground including watering, ramming consolidation etc.
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer) water meter absorption less than 0.08 % and comprising to IS: 15622 of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement : 4 course sand) includes grouting the joints with white cement and matching pigments etc. Complete.(Size of tile 600 x600 mm )
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer) water meter absorption less than 0.08 % and comprising to IS: 15622 of approved make, in all colours and shades in skirting, riser of steps over 12 mm thick bed of cement mortar 1:3(1 cement : 3 course sand) includes grouting the joints with white cement and matching pigments etc. Complete.(Size of tile 600 x600 mm )
Providing and laying ceramic Glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make laid on 20 mm thick bed o cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete In colour such as white, Ivory, Grey , Fume Red Brown
Distempering with dry distemper of approved brand and manufacturer (two or more coats) of required shade on new work to give an even shade
Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm
Applying priming coat: With ready mixed pink or grey primer of approved brand and manuacturing on woood work ( Hard and soft wood) two or more coats
Structural steel work inbuilt up section trusses and rame work including cutting , hoisting, fixing in position and applying a primer coat of approved steel primer all complete welded
Providing and fixing Gang saw cut mirror polished premoulded and prepolished machine cut or kitchen plateforms vcanity counters, windows silts etc. of approved size shade and coloured laid over thick base
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.
Provision for electrification
Provision for 02 Nos. 1.5 Ton AC and its fitting complete job
Provision for spectic tank
Provision for sanitary fitting
Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 20 km.
Carriage of Bajri (Below 40 mm) by Mechanical Transport from source to site of work for an av. Distance of 20 km.
Carriage of Brick by M.T from klin to site of work 15 km
Carriage of tile by M.T from klin to site of work 15 km
M/S PUSHPINDER SINGH & BROTHERS
KULJIT SINGH JAMWAL
M/S RAJNI MALIK
Mohd Rafeeq
M/S NEW ERA CONSTRUCTION
M/S SIDDAHANT ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .