PROVN OF HARD STANDING PLINTH AREA FOR VEHCLES FOR ISSUE DAY IN 42 COY SUPPLY, PROVN OF 02 X COVERED CAR SHED NEAR ADM BLOCK AT SUPPLY DEPOT AND CERTAIN MINOR WORKS UNDER GE WEST BAREILLY.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed.

M & L for 15 mm thick rendering on external surface on fair faces of brick work or concrete surfaces with cement mortar 1:4 with including mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed.

M&L for preparation of new plastered walls surfaces and applying two coats of Cement based paint paint over a coat of 2mm thick wall care putty complete all as specified and directed.

M & L for hard core of gauge not exc. 63mm, deposited, spread and levelled in layerfs not exc. 15 cm thick watered and rammed to a true surface of broken stone or boulders etc. complete all as specified and directed.

M & L plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10 mm wide, filled with sealing compound grade "A" complete all as specified and directed.

M & L 150 mm thick Cement concrete work in pavement/hard -standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or lesscomplete all as specified and directed.

Removing excavated soil exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50m above the starting point complete.

Excavation in post holes (or similar holes) each n. exc. 0.50 CUM and getting out, returning filling in and ramming earth in layers n. exc. 25 cm watering and removing surplus soil and making good disturb surface in soft/loose soil complete all as specified and directed.

S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections ) including distance pieces, cleats, nut bolts etc complete all as specified and directed.

M & L 100 mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement over 20mm thick sand cushioning complete all as specified and directed

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of surface complete all as specified and directed.

Taking down Shutters of any description each .exc 2.0 sqm each and Refixing in Same opening including making good disturbed portions of wall with new or old bricks, lintel, cills , hold fasts etc in CM 1:4 complete all as specified and directed.

M& L for Double action pivet made up of iron with foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as spd and directed

S & F for hold fasts; Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including taking down old plaster complete all as specified.

M & L for Cutting holes size 0.35x0.35x0.50m in brick walls built in cement mortar cement lime mortar and stone walls built in lime mortar holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed.

M&L for applying two coats of oil bound distempering over one coat priming (chalk whitening) on old / new plastered surfaces,including preparing surface, complete all as specified and directed by Engineer-in-Charge

S & F for triple bay stainless steel scrub station wall mounted stainless steel 304 grade, 16/18 SWG grade stainless steel with apolished thickness of 1.5mm operated by automatic sensor + timer and manual foot operated with automatic thermostatic water mixer inbuilt inside. Scrub will be fitted with top light and mirror. Seamless and anti splash rounded corner design to prevent bacterial growth and easy cleaning. Size 2100 mm x 600mm x 1450mm complete all as spd and directed. Make Altos / Dupont / Desco Medical India

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 as in sub base complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with colored cement and pigment (colour/pattern approved by GE) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including 25mm thick sand cushioning including watering and consolidation surface complete all specified and directed.

M&L providing cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over cut to length bend to shape required incl cranking, bending, spirally hooping for stirrups, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

M&L for PCC 1:4:8 typeD2 using 20 mm graded stone agg as in fdn filling and mass concrete complete all as specified and directed

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in fair finished surface of concrete complete all as specified and directed

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified & directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns complete all as specified and directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M&L RCC M-25 using 20 mm graded aggregate as in foundation, footing, plinth beam, base of columns etc all as specified and directed.

M&L RCC M-25 using 20 mm graded aggregate as in columns, pillars, piers, post and structs etc all as specified and directed.

M&L RCC M-25 using 20 mm graded aggregate as in roof Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed.

M&L RCC M-25 using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair complete all as specified.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm with a wall thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 150 of SSR 2004 part-II. The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction and as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.

M&L 40mm thick PCC 1:2:4 (type B-0) for damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)

M & L rendering 5mm thick on ceiling in cement mortar 1:4 finished fair and even smooth without using extra cement complete all as specified.

Supply only water proofing compound complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:6 complete all as specfied and directed.

M&L glazed ceremic colour tiles in vertical surfaces 450x300x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick rendering in CM (1:4) complete all as specfied and directed.

S&F 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.

S&F for PVC (SWR) bends any radius

S&F GI tubing 15mm medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 15mm dia all as specified

S&F GI tubing medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 20mm dia, all as specified

S&f forPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets incl. 32mm dia flush pipe of polythelene of low or high density, for low or high level flushingh cistern

S&F PVC connections 15mm size with PTMT nuts of length 450mm.

S & F for chromium plated stop valves/Angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

S & F Vitreous China wash hand basin flat back, including , waste coupling brass,waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed.

S&F for Wash down water closet (EWC Pedestal Vitreous ,P type, black,with PVC Seat closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device water closet pan (pedestal pattern), white, fixing bolt complete.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, waste pipe securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap)

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F fancy type 15 mm bore brass chromium plated WHB for water screwed down for iron pipe and fixed to WHB complete all as specified and directed.

S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with railing fixed with fancy type screws complete all as specified and directed.

S&F 15mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges including brackets complete all as specified.

M&L CI floor trap 75mm with grating incluing jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 500 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed

S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm complete all as specified and directed.

M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.

Cutting into existing manholes for concrecting new drains making good to pipe and rendering, cutting out existing benching for and forming brach channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reformed bending as required internal dia of pipe 150mm complete all as specified and directed

Material and labour for preparation of new plastered or pointed surface of walls/pillars/cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour complete all as specified.

Material and labour for preparation of new plastered or pointed surface of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coat of white wash as approved tint/colour complete all as specified.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. (c) applying a coat of Aluminium paint @ 0.20 Litres per Sqm complete as per manufacturer's instructions.

Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.

All as Per Srl Item No 85 above but for (b) One 5 pin 5 Amp switch socket out let point on an independent board.

All as Per Srl Item No 85 above but for (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge.

S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

S&F in replacement LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

S&F in replacement LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

S & F exhaust fan, steel body AC single phase, 230V of size 450mm sweep with blades and frame and louvers complete all as specified and directed.

S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.

Please Enable Macros to View BoQ information