SPECIAL REPAIR TO ROAD INSIDE DEPOT AREA UNDER GE BANAR JODHPUR

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area exceeding 400sqm and exceeding 50mm deep and removing where directed by Engr-In-Charge complete all as specified and directed

M&L for applying evenly a priming coat with paving bitumen VG-10 grade at the rate of 10.0 Kg per 10.0 Sqm on unsurfaced surfaces, pot holes etc complete all as specified and directed.

M&L for laying premixed bituminous macadam using VG-30 paving bitumen (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), complete all as specified and as directed. Note: No extra payment will be made if binder is more than 4%.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm on black top surfaces complete all as specified and directed.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.0% binder content by weight of total mix using paving bitumen VG-30 grade and laying with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and painting lines, dashes, arrows, letters etc on roads, pavements and the like not exceeding 10cm wide with retro reflective Thermoplastic road marking paint (of approved colour) confirming to BS- 3262-1989 by hot mixing method as per IS specifications, heating with gas, to achieve minimum uniform thickness 2.5mm complete all as per manufacturers instructions, specified and directed.

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete. all as specified and directed

S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm), type B1 using 20mm graded stone aggregate complete all as specified and directed

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for sand filling under floor or in foundations including watering and consolidating complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Precast cement concrete solid blocks exceeding 10 cm in width using cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and setting in cement mortar 1:4 as in Kerb stone (Machine made) complete all as specified and directed.

B R C TRADING COMPANY