Supply Laying and jointing of G I pipe line from Bore wells near Sri Dharmarajulu Temple to Inside Main Temple Nagalapuram

Supply of G.l. pipes of following "B" class of lSl marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per lS 1239 marked (TATA make )

Laying and jointing of folllowing G.l. Pipes and G.l Specials of approved make such as tees, couplings(sockets), reducing tees, reducing sockets, reducing elbows, hex nipples, Gl cross, long couplings and nipples where ever necessary including jointing the pipes or running along the walls/floor including making holes/grooving the walls and making it good with C.M (1:3) including cost of wooden plugs, cleats, clamps and screws as directed during execution including cost and conveyance of all materials etc.,complete. (Labour Charges Only )

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all Operational, incidenta! ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil-Manual means up to 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidaled including cost and conveyance of all materials, incidental charges etc., complete.

Supply of G.l. Specials of approved make / ISI marked

100 mm dia G.l. Elbows/bends

100 mm dia G.I Tees of approved make/ISI mark

100 mm dia G.l. Couplings (socket) of approved make/ISI mark

Supply of End Caps - OD 110 mm

Supply of the following dia of MS Flanges of approved make with ISI mark.

OD 110 mm dia MS Flanges

OD 50 mm dia MS Flanges

Labour charges for CUTTING of 100 mm dia G.l Pipes

Labour charges for THREADING of 100 mm dia G.l Pipes

SUPPLY AND DELIVERY OF 3 mm thick RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES.

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1")

Supply & Delivery of following Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 inclusive of transportation and exclusive of all taxes

50 mm dia - PN 1.6 (MPa)

100 mm dia - PN 1.6 (MPa)

Cutting road surface including stacking of excavated materials for Pipe line trench work - Cutting open Cement concrete road surface with condete saw cutter and removal with Breaker

Cement Concrete using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc , complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix. - C C.(1:2.5:5) - Grade M15

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel, inclusive of transportation and exclusive of all taxes etc. complete ISI marked. -100 mm dia - PN 1.6 (MPa)