PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to

belowout the work

the estimated rates mentioned above amount of my / our tender works out as under :-

SCHEDULE NAME OF WORK Amount

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for

2) under all conditions, site moisture weather etc.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then

the difference in consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned

in tender. However no extra payment shall be made for use of additional Quantity of cement as per actual concrete mix

design. Concrete mix design shall be done in GERI laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification

4) and details of work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS".

6) In terms of the Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other

construction workers regulation of equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

The contractor is solely responsible to bare all applicable taxes. e.x. GST etc. and department will not entertain any contractor

8) representation to reimburse any financial burden due to applicable taxes : e.x. GST etc. (gst will be Paid Extra)

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN GREEN CITY-2A SOCIETY AREA OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-1"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

140.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage (ii) above 48 to

14.00 Watts ( 60 watts) Cat-lll 4997.48 EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

2.00 (a) 32 A.Cat - III 578.73 No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

28.00 (C) 2 to 4 core 10 Sq. mm 38.38 No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [E] Overall

Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD

14.00 300mm * 6 nos. of 20 Ø hole) 16640.76 EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

1.00 thick MS angle. 3595.60 No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium

rechargeable battery backup erected as directed.

13 Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add]

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A)

16 Providing and erecting HOT deep Galvanised iron strip wire

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

14.00 complete with necessary 8 SWG earth wire. 368.65 No

18 for using salt and charcoal/coke as required for pipe type

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(ii) 40Amps. FP cat - III

20 Supplying and erecting HYLAM sheet on existing angle iron Sq.

2.00 frame.for following thickness.6mm THICK 1156.45 Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB)

2.00 Cat III 6173.12 No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN EVERGREEN SOCIETY OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-2"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

320.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Four Thousand Nine

440VAC line supply with over-voltage (ii) above 48 to 60 Hundred Ninety Seven and

32.00 Watts ( 60 watts) Cat-lll 4997.48 Forty Eight Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

32.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg Hundred Ninety One and

1.00 4591.46 Forty Six Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm Rupees One Hundred Forty

978.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

256.00 (B) 10 Sq.mm 13.13 Paise NO

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. Rupees Thirty Eight and

64.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty Eight Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [E] Overall

Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Sixteen Thousand Six

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD Hundred Forty and Seventy

32.00 300mm * 6 nos. of 20 Ø hole) 16640.76 Six Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

32.00 1900.82 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with

Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm

Hundred Ninety Five and

thick MS angle.

1.00 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time Rupees Two Thousand Seven

switch complete erected as per direction Cat III Hundred Eighty Two and Fifty

2.00 [D] 4 pole 440V 40 Amp. 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

875.00 357.54 Seven and Fifty Four Paise Mtrs.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

914.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire

Rupees Seventy Seven and

70.00 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

32.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

32.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Rupees Two Thousand Six

(ii) 40Amps. FP cat - III Hundred Thirty Seven and

2.00 2637.11 Eleven Paise No

20 Supplying and erecting HYLAM sheet on existing angle iron Rupees One Thousand One

frame.for following thickness.6mm THICK Hundred Fifty Six and Forty Sq.

2.00 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

2.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN GAS GODOWN BOX CULVERT TO RANAVAV-PORBANDAR BYPASS OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-3"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

400.00 77.77 Seventy Seven Paise m

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Six Thousand One

440VAC line supply with over-voltage.(iv) above 90 to 120 Hundred Eleven and Fifty

40.00 watts ( 120 watts) Cat-lll 6111.51 One Paise EACH

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

40.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Rupees Four Thousand Five

Electrical Installation up to 440V in normal soil,Length of

Hundred Ninety One and

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg

1.00 4591.46 Forty Six Paise EACH

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm Rupees One Hundred Forty

1210.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

320.00 (B) 10 Sq.mm 13.13 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

Rupees Thirty Eight and

(C) 2 to 4 core 10 Sq. mm

80.00 38.38 Thirty Eight Paise No

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [G] Overall

Length of 9.0 meter, Average thickness : 7mm,

Top/Bottom Ouside Dia. 76/228mm +/‐2.Weight of Pole

40.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Twenty Two

frp claded (Size : 405 Ø * 18mmthk , Mounting hole PCD Thousand Four Hundred Four

40.00 350mm * 6 nos. of 20 Ø hole) 22404.83 and Eighty Three Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

Rupees One Thousand Nine

(A) Single arm bracket 1 Mtr

40.00 1900.82 Hundred and Eighty Two NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

1.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time Rupees Two Thousand Seven

switch complete erected as per direction Cat III Hundred Eighty Two and Fifty

2.00 [D] 4 pole 440V 40 Amp. 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

1075.00 357.54 Seven and Fifty Four Paise Mtrs.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

1130.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire Rupees Seventy Seven and

80.00 8 to 16 SWG. 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

40.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

40.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Rupees Two Thousand Six

(ii) 40Amps. FP cat - III Hundred Thirty Seven and

2.00 2637.11 Eleven Paise No

20 Supplying and erecting HYLAM sheet on existing angle iron Rupees One Thousand One

frame.for following thickness.6mm THICK Hundred Fifty Six and Forty Sq.

2.00 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

2.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN GREEN CITY-2 SOCIETY OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-4"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

800.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Four Thousand Nine

440VAC line supply with over-voltage (ii) above 48 to 60 Hundred Ninety Seven and

80.00 Watts ( 60 watts) Cat-lll 4997.48 Forty Eight Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

80.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg Hundred Ninety One and

1.00 4591.46 Forty Six Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm Rupees One Hundred Forty

2370.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

640.00 (B) 10 Sq.mm 13.13 Paise NO

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. Rupees Thirty Eight and

160.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty Eight Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 No Rupees Only

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [E] Overall

Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Sixteen Thousand Six

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD Hundred Forty and Seventy

80.00 300mm * 6 nos. of 20 Ø hole) 16640.76 Six Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

80.00 1900.82 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

1.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time

Rupees Two Thousand Seven

switch complete erected as per direction Cat III

Hundred Eighty Two and Fifty

[D] 4 pole 440V 40 Amp.

2.00 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

2075.00 357.54 Seven and Fifty Four Paise Mtrs.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

2210.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire Rupees Seventy Seven and

150.00 8 to 16 SWG. 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

80.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

80.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Rupees Two Thousand Six

(ii) 40Amps. FP cat - III Hundred Thirty Seven and

2.00 2637.11 Eleven Paise No

20 Supplying and erecting HYLAM sheet on existing angle iron Rupees One Thousand One

frame.for following thickness.6mm THICK Hundred Fifty Six and Forty Sq.

2.00 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

2.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN MARUTI PARK SOCIETY OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-5"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

340.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Four Thousand Nine

440VAC line supply with over-voltage (ii) above 48 to 60 Hundred Ninety Seven and

34.00 Watts ( 60 watts) Cat-lll 4997.48 Forty Eight Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

34.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg Hundred Ninety One and

1.00 4591.46 Forty Six Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm Rupees One Hundred Forty

1036.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

272.00 (B) 10 Sq.mm 13.13 Paise NO

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. Rupees Thirty Eight and

68.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty Eight Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [E] Overall

Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Sixteen Thousand Six

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD Hundred Forty and Seventy

34.00 300mm * 6 nos. of 20 Ø hole) 16640.76 Six Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

34.00 1900.82 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

1.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time Rupees Two Thousand Seven

switch complete erected as per direction Cat III Hundred Eighty Two and Fifty

2.00 [D] 4 pole 440V 40 Amp. 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

925.00 357.54 Seven and Fifty Four Paise Mtrs.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

968.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire Rupees Seventy Seven and

70.00 8 to 16 SWG. 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

34.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type

Rupees One Hundred

Seventy One and Seventy

34.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Rupees Two Thousand Six

(ii) 40Amps. FP cat - III Hundred Thirty Seven and

2.00 2637.11 Eleven Paise No

20 Supplying and erecting HYLAM sheet on existing angle iron

frame.for following thickness.6mm THICK Rupees One Thousand One

Hundred Fifty Six and Forty Sq.

2.00 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

2.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN OM NAGAR SOCIETY OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-6"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

330.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Four Thousand Nine

440VAC line supply with over-voltage (ii) above 48 to 60 Hundred Ninety Seven and

33.00 Watts ( 60 watts) Cat-lll 4997.48 Forty Eight Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

33.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg Hundred Ninety One and

1.00 4591.46 Forty Six Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm Rupees One Hundred Forty

1007.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

264.00 (B) 10 Sq.mm 13.13 Paise NO

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

Rupees Thirty Eight and

(C) 2 to 4 core 10 Sq. mm

66.00 38.38 Thirty Eight Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

+/‐50MPa. No Rupees Only

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [E] Overall

Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Sixteen Thousand Six

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD Hundred Forty and Seventy

33.00 300mm * 6 nos. of 20 Ø hole) 16640.76 Six Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

33.00 1900.82 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

1.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III Rupees Two Thousand Seven

[D] 4 pole 440V 40 Amp. Hundred Eighty Two and Fifty

2.00 2782.55 Five Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

900.00 357.54 Seven and Fifty Four Paise Mtrs.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

941.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire

Rupees Seventy Seven and

70.00 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

33.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

33.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Rupees Two Thousand Six

(ii) 40Amps. FP cat - III Hundred Thirty Seven and

2.00 2637.11 Eleven Paise No

20 Supplying and erecting HYLAM sheet on existing angle iron Rupees One Thousand One

frame.for following thickness.6mm THICK Hundred Fifty Six and Forty Sq.

2.00 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Rupees Six Thousand One

Cat III Hundred Seventy Three and

2.00 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN VERIOUS AREA AREA OF RANAVAV NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-7"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

3112.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage Cat-lll

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

2A (iv) above 90 to 120 watts ( 120 watts) Cat-lll Rupees Six Thousand One

Hundred Eleven and Fifty

205.00 6111.51 One Paise EACH

2B (i) above 36 to 48 watts (48 watts) Cat-lll Rupees Three Thousand

Three Hundred Forty Five

142.00 3345.12 and Twelve Paise EACH

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

325.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

26.00 (a) 32 A.Cat - III 578.73 Three Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of

Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg

Hundred Ninety One and

13.00 4591.46 Forty Six Paise EACH

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

Rupees One Hundred Forty

(C) 4 core 10 Sq. mm

9775.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

2544.00 (B) 10 Sq.mm 13.13 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. Rupees Thirty Eight and

650.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty Eight Paise No

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting

9-A [D]Overall Length of 6.0 meter, Average thickness : 5mm,

Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of Pole

19.0 Kg approx. (Without base) Metal Anchor Base dully

Rupees Thirteen Thousand

frp claded (Size : 340 Ø * 12mmthk , Mounting hole PCD

Six Hundred Two and Sixty

285mm * 6 nos. of 20 Ø hole)

62.00 13602.68 Eight Paise EACH

9-B [E] Overall Length of 7.0 meter, Average thickness : 6mm,

Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

25.0 Kg approx. (Without base) Metal Anchor Base dully

Rupees Sixteen Thousand Six

frp claded (Size : 355 Ø * 14mmthk , Mounting hole PCD

Hundred Forty and Seventy

300mm * 6 nos. of 20 Ø hole)

65.00 16640.76 Six Paise EACH

9-C [G] Overall Length of 9.0 meter, Average thickness : 7mm,

Top/Bottom Ouside Dia. 76/228mm +/‐2.Weight of Pole

40.0 Kg approx. (Without base) Metal Anchor Base dully

Rupees Twenty Two

frp claded (Size : 405 Ø * 18mmthk , Mounting hole PCD

Thousand Four Hundred Four

350mm * 6 nos. of 20 Ø hole)

198.00 22404.83 and Eighty Three Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

303.00 1900.82 Paise NO

(B) Double arm bracket Rupees Two Thousand Four

Hundred Thirteen and Ninety

22.00 2413.90 Paise NO

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

13.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

13.00 2354.31 One Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

13 Supplying & erecting power contactor ,AC3 duty for time Rupees Two Thousand Seven

switch complete erected as per direction Cat III Hundred Eighty Two and Fifty

26.00 [D] 4 pole 440V 40 Amp. 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

8900.00 357.54 Seven and Fifty Four Paise Mtrs.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

9364.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire

Rupees Seventy Seven and

650.00 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

325.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

325.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

Rupees Two Thousand Six

following Max. rating erected as directed.

Hundred Thirty Seven and

(ii) 40Amps. FP cat - III

26.00 2637.11 Eleven Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

20 Supplying and erecting HYLAM sheet on existing angle iron Rupees One Thousand One

frame.for following thickness.6mm THICK Hundred Fifty Six and Forty Sq.

26.00 1156.45 Five Paise Mtr.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

26.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

RANAVAV NAGARPALIKA

RANAVAV, DIST. PORBANDAR

Name of Project : PROVIDING AND ERECTING LED STREET LIGHT WITH POLE IN VERIOUS AREA AREA OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR (OUT GROUTH AREA GRANT)

Name of Work : LED STREET LIGHT IN SWAMI VIVEKANAND VIDYALAY TO GAS GODOWN BOX CULVERT OF RANAVAV

NAGARPALIKA.DIST-PORBANDAR

"SCHEDULE - B-8"

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

1 Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. pipe

Rupees Seventy Seven and

(h) 2.50 Sq.mm 3 core round PVC sheathed

300.00 77.77 Seventy Seven Paise m

2 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have Rupees Six Thousand One

440VAC line supply with over-voltage.(iv) above 90 to 120 Hundred Eleven and Fifty

30.00 watts ( 120 watts) Cat-lll 6111.51 One Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

3 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark - Cat-III Rupees One Hundred Twelve

30.00 112.11 and Eleven Paise No

4 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following Rupees Five Hundred

capacity Seventy Eight and Seventy

2.00 (a) 32 A.Cat - III 578.73 Three Paise No

5 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.(a) For

Electrical Installation up to 440V in normal soil,Length of Rupees Four Thousand Five

pipe - 1 Mtr,Back filling compound - 1 Nos Bag of 15 Kg Hundred Ninety One and

1.00 4591.46 Forty Six Paise EACH

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 4 core 10 Sq. mm

Rupees One Hundred Forty

920.00 140.39 and Thirty Nine Paise Mtrs.

7 Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. Rupees Thirteen and Thirteen

240.00 (B) 10 Sq.mm 13.13 Paise NO

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. Rupees Thirty Eight and

60.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty Eight Paise No

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

provided with FRP/GRP base bracket dully fabricated from

metal(M.S) and dully claded with FRP/GRP material to

avoid any metal exposer and painted with PU paint.Pole

should mechanical properties i.e 1. Specfic gravity (ASTM

D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D

570)<0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

+/‐50MPa. No Rupees Only

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

9 Pole should be flame retardant as per IS 6746.Resin used

CONT shall be UV resistance and pigmented. Pole should be

I. painted with first coat of epoxy primer and then two coat

of highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable termination box

with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement. (1) 'A' class frp/grp pole

suitable for base plate mounting [G] Overall

Length of 9.0 meter, Average thickness : 7mm,

Top/Bottom Ouside Dia. 76/228mm +/‐2.Weight of Pole

40.0 Kg approx. (Without base) Metal Anchor Base dully Rupees Twenty Two

frp claded (Size : 405 Ø * 18mmthk , Mounting hole PCD Thousand Four Hundred Four

30.00 350mm * 6 nos. of 20 Ø hole) 22404.83 and Eighty Three Paise EACH

10 Providing FRP/GRP arm bracket of having 15˚ arm with

mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket 1 Mtr Rupees One Thousand Nine

Hundred and Eighty Two

30.00 1900.82 Paise NO

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

11 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with Rupees Three Thousand Five

angle iron legs 45 cm long made from 35 X 35 X 5 mm Hundred Ninety Five and

1.00 thick MS angle. 3595.60 Sixty Paise No

12 Supplying & erecting approved make time switch with

single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock

‘ON’ &’ OFF’ automatic arrangement at any predetermined

time during each 24 hours,With nickel cadmium Rupees Two Thousand Three

rechargeable battery backup erected as directed. Hundred Fifty Four and Thirty

1.00 2354.31 One Paise No

13 Supplying & erecting power contactor ,AC3 duty for time Rupees Two Thousand Seven

switch complete erected as per direction Cat III Hundred Eighty Two and Fifty

2.00 [D] 4 pole 440V 40 Amp. 2782.55 Five Paise No

14 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.(B) If additional

machinery like hammer driller or JCB use [Add] Rupees Three Hundred Fifty

825.00 357.54 Seven and Fifty Four Paise Mtrs.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable. (A) Rupees Sixty Two and Sixty

860.00 50 mm dia 62.62 Two Paise mtr.

16 Providing and erecting HOT deep Galvanised iron strip wire Rupees Seventy Seven and

60.00 8 to 16 SWG. 77.77 Seventy Seven Paise Kg.

17 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit Rupees Three Hundred Sixty

30.00 complete with necessary 8 SWG earth wire. 368.65 Eight and Sixty Five Paise No

18 for using salt and charcoal/coke as required for pipe type Rupees One Hundred

earthing Seventy One and Seventy

30.00 171.70 Paise No

19 providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

Rupees Two Thousand Six

following Max. rating erected as directed.

Hundred Thirty Seven and

(ii) 40Amps. FP cat - III

2.00 2637.11 Eleven

One Thousand One No

20 Supplying and erecting HYLAM sheet on existing angle iron Hundred Fifty Six and Forty Sq.

2.00 frame.for following thickness.6mm THICK 1156.45 Five Paise Mtr.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

21 Pproviding and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. Rupees Six Thousand One

housing. ICS=100% of ICU only (25 A.-100 A. FP MCCB) Hundred Seventy Three and

2.00 Cat III 6173.12 Twelve Paise No

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting

the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

writtern in figure

estimated ratesand words) above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

2) conditions, site moisture weather etc.

Item Quantities Item Descrption Estimated Rates Unit Total Amount

Item Quantities Item Descrption Estimated Rates Unit Total Amount

No. Estimated in Figure in Words according to

but may be estimated

more or less quantities.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

5) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

6) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

7) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

8) The contractor is solely responsible to bare all applicable taxes. Excluding GST

9) GST will Be Paid Extra As Per Applicable Rates

Signature of contractor Chief Officer

RANAVAV NAGARPALIKA