Upgradation of Natural Turf and Sprinkler System at Thalassery Stadium, Kannur

Amount

Upgradation of Natural Football Turf

2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

od292412/2020_2021 : Providing & planting bermuda grass in rows of 5cm apart in both direction in proper level and camber after fine dressing the prepared ground. The rate including renovation of Grass including beeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including anti termite treatment of lawn area as per the direction of officer in charge. The first 50 % payment shall be paid only after the grass makes proper thick turf after the first cutting.

30.2.11 : Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately).

Upgradation of Sprinkler System

od292392/2020_2021 : Design supply,laying & jointing in position of HDPE pipe 63mm 6Kg

od292394/2020_2021 : Design supply,laying & jointing in position of HDPE pipe 90mm 6Kg

od292397/2020_2021 : Design,supply,laying & jointing in position of HDPE pipe <br>40mm 6Kg for automation wiring duct

od292398/2020_2021 : Supply, Fixing & Commissioning of Sod Cup Kit allows users to grow turf on the cap of the rotors. This allows for an early invisible installation for applications such as sports fields. The rugged construction of the Cup Kit provides maximum durability while maintaining maximum player safety. Integral pullup slot. Easy arc adjustment after installation through inner cup. Drain holes top romote healthy turf growth. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete. Engineering plastic

od292400/2020_2021 : POP UP SPRINKLERS ;Supply,installation testing and commissioning of Popup sprinkler full and semi/part circle filtration of radius throw minimum 15 m up to 23 m & flow of 0.09-0.61lps. at an operative pressure of 2.5-4.5kg/cm.sq., The Sprinkler is Gear driven rotary type with slip clutch mechanism and heavy duty retract spring. memory arc, nonstrippable and brass reinforced nozzle turret, left right both side arc adjustment, Memory arctechnology, part and full circle in same sprinkler. ;The sprinkler shall have Multi-function, pressure-activated wiper seal for low pressure opreration ;The sprinkler shall have Internal Seal-A-Matic device which prevents low head drainage (up to 3.1 m) & ; hence puddling & erosion. The body of sprinkler is of non-corrodible, heavy duty, ABS plastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.

od292402/2020_2021 : Supply, Fixing & Commissioning of 1" Pop up Connecting Swing joint Assembly. The tubing shall be made of UPVC, a working pressure of 5.5kg/cm2 at 43 degree celcius and a surge pressure of 16.6kg/cm2. The fittings shall be made of UV resistant thermoplastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete.

od292404/2020_2021 : Supply, Fixing & Commissioning of HDPE services saddle of varying size with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292405/2020_2021 : Supply, Fixing & Commissioning of Brass key threads into top of quick coupling valve to provide water access. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292408/2020_2021 : Supply, Fixing & Commissioning of 1.5'' quick coupling valve made up of solid brass with locking cover corrosion resistant and SS spring. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292410/2020_2021 : Supply, fixing & Commissioning of 6" Round box of HDPE or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292411/2020_2021 : Supply, Fixing & Commissioning of 12"; Rectangular Valve Box made of HDPE ,or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292413/2020_2021 : Supply, Fixing & Commissioning of Double acting 1/2"; Air release valve, made of HDPE material. The Air release valve shall be capable of both releasing and admitting air from and into the line. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292415/2020_2021 : Supply, Fixing & Commissioning of PVC Ball Valve, security pivot to maintain lever in space, double water tight joint, direct injection stem, non mechanical, with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials, fittings,labour, transportation complete.

od292416/2020_2021 : Supply, Fixing & Commissioning of Direct bury-on wire connect or with strain relief, UL 486 D certified, with water proof silicon sealant, fits wire from 22ga to 6ga as per specifications complete.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292418/2020_2021 : Supply, Fixing & Commissioning of Pressure Regulating Module (Dial) to Maintain constant outlet pressure between 1.04 to 6.9 bar. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292420/2020_2021 : Supply, Fixing & Commissioning of 2"; Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer, pressure rating upto 10.4bar and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30 ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete.

od292421/2020_2021 : Supply, Fixing & Commissioning of 3" Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0.7 to 10 bar and maximum flow of 10 to100 m3/h ,at water temp. upto 60°C with 24 VAC - 50 Hz,coil resistance 30ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292422/2020_2021 : Supply, Fixing & Commissioning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory,10KV surge protection with removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,with contract default programes,slow closing valve removable battery with sensor terminals.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292424/2020_2021 : Automation Equipment <br>Supply, Fixing & Commissioning of Automation Equipment: 14 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto - 55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strength 1400PSI for two way communication between solenoid valve and decoders complete .Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292426/2020_2021 : Supply, Fixing & Commissioning of CI Paddle Wheel Water Meter Metal Flanged of pressure rating 10 Bar with all accessories . Work has to be executed as per the approved drawings and/or as per the direction of Engineer in charge.Rate inclusive of all materials, fittings,labour,transportation complete.

od292428/2020_2021 : Supply, Fixing & Commissioning of PVC Pressure release valve 2" with all accessories . Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292429/2020_2021 : Supply, Fixing & Commissioning of 2" gunmetal Non Return Valve PN10 with all accessories to prevent back flow. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete.

od292431/2020_2021 : Supply, Fixing & Commissioning of CI control Valve, Butterfly Valve in mainline for by pass and flow diversion of approved quality with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete.

od292432/2020_2021 : Supply, Fixing & Commissioning of Suction, Delivery & Header Pipes of size suitable for the pump flow (ASTM sch40/80 orPVC10Kg/cm2). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292434/2020_2021 : Supply, Fixing & Commissioning of Control panel suitable for pump set having panel box made of CRCA sheet of 2mm thickness and fixed along with DOLstarter, start/ stop push buttons, Ammeter, Single phase preventor, Voltmeter, Indicating lamps, MCB, Dry level guard sensor with control cable,etc. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292435/2020_2021 : PUMPING UNIT <br>Supply, Fixing & Commissioning of Monoblock or open well submercible pumpset of having discharge and head of design flow . Duty of Pump : min 4 lps / Each Pump ;Pressure Head Range = min 50 - 55 RM. No of pumps: 1 working + 0 standby. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete.

od292436/2020_2021 : Supply, Fixing & Commissioning of Pump relay 24AC PLA relay, stabiliser 300watts Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials, fittings,labour,transportation complete.

od292437/2020_2021 : Supply, Fixing & Commissioning of ASTM automatic rain shut off device, latching hinge with multiple rain fall settings 5mm to 20mm ULCUL listed Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.

od292438/2020_2021 : Supply, Fixing & Commissioning of Moisture sensing device, to measure soil temp, EC, Moisture level complete to convert as smart controller, with corrosion resistant sensor and setting threshold moisture level. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour, transportation complete.

SAJU C

Bidder Name

V M SAJID

SAJU C