SPECIAL REPAIR TO BLDG NO P 132 ALMA LINE JCOs LIVING OF KRC AND PROVN OF SECURITY LIGHTS NEAR OTM AND MD ACCN OF KRC RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes complete all as specified and directed.

M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished light shade , area of each tiles exc 0.18 Sqm but not exc 0.36 sqm , as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemet to match complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished light shade , area of each tiles exc 0.18 Sqm but not exc 0.36 sqm , as in verticle surfaces such as skirting/ dado etc set and jointed in neat cement slurry and pointed in white or coloured cemet to match complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing/screed bed of dado/ skirting & Vertical Tiles complete all as specified and directed.

M & L for glazed ceramic coloured / printed tiles 300mm x 450mm, 6 to 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed.

M & L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M & L for form work to rough finished surface of concrete on soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed

S & F TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) Complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement laid in bays including necessary form work complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc& removing rubbish to a disance not exc 250m complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement including mixed with water proofing compound of approved make @ 3% by weight of cement or as per manufacturer instructions complete all as specified and directed. Note: Water proofring compound shall be measured paid seperately

M & L for 15mm thick on other than fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:6, surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even as in ceiling without using extra cement complete all as specified and directed.

M/L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat primer complete all as specified and directed.

M & L for complete removal of existing treatment for preparing old painted surfacess of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment for preparing old painted surfacess of walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash including complete removal of existing treatment of old plastered surfaces complete all as specified and directed.

M&L for applying 2 mm thick layer of wall care putty on wall surfaces including cornices etc for proper levelling and smooth finish of wall complete all as specified and directed

Demolition brick work or stone/ boulder or PCC block masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete al as specified

Taking down chowkhat or frames with shutters not exc. 1.5 sqm each without taking off shutters form the frame complete all as specified and directed.

Taking down chowkhat or frames with shutters exc. 1.5 sqm but not exc. 4 sqm each without taking off shutters form the frame complete all as specified and directed.

Refixing of chowkhat with shutter of any description exceeding 1.5 Sqm but not exc. 4.00 sqm each complete all as specified and directed.

Refixing of shutter of any description in same or other opening shutter exceeding 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

M&L for Pressed steel frames 105X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,supplied and fixed complete all as specified and directed.

M&L for Pressed steel frames 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,supplied and fixed complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate 140 mm complete all as specified and directed.

S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M & L for preparing old painted surface to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel complete all as specified and directed.

M & L for preparation of newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S & F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.(Note:- stainless steel butt hinges and necessary SS screws shall be paid separately.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

S&F in repairs stop valves/angle valves, cast copper alloy, fancy type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, fancy type chromium plated with long shank & cup (concealed) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repairs 15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed.

S& F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 15 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for sunken floor treatment as described as under (i) to (vi) :- (i) Demolition of cement concrete of any description and in any position not otherwise specifically provided or in any type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L to fill the sunken floor with PCC ( 1:5:10) type E-2 using brick aggregate over the treated surface complete all as specified and directed. (iii) M& L 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Vertical sides shall be plastered in CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed. (iv) After laying sewage/ plumbing pipes with fixtures in position 2 coats of OMIPLAS EP-101 epoxy compound shall be applied complete all as specified and directed. (v) Spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water ,including cutting holes and making good if needed as specified and directed. (vi) Testing of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defects complete all as specified and directed.The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

M & L for 32mm bore high density polyethylene pipes (HDPE) of 450 to 600mm long complete all as specified and directed.

M&L for PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

M&L for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair PVC (SWR) 75 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 bore PVC (SWR) bends any radius complete all as specified and directed.

S & F PVC (SWR) junction single 75mm , (Single T) equal or unequal complete all as specified and directed.

S & F PVC (SWR) vent cowls 110mm dia complete all as specified and directed..

S&F brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed.

S&F chromium plated Soap dish fixed to plug with chormium plated brass screws complete all as specified and directed.

S & F 20mm dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified and directed.

S & F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified and directed.

S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position complete all as specified and directed.

S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supplying and laying APP based modified water proofing polymeric membrane, reinforcemed with nonwoven polyester fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm,laid over bituminous primer on 15mm thick plastered sufaces layer in CM 1:4 with water proofing compound (WPC )@3% by weight on concrete surface roof / parapet, over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method and top surfaces to be treated with non reflective bituminous aluminium paint @0.15 Kg/Sqm all as per manufacturers instructions as complete all as specified and directed . Note: WPC shall deemed to be included in unit rate quoted by the contractor of this item and shall not be paid extra.

M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S & F flat iron as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

Supply only intergral water proofing compound complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fixing in repair Welded steel wire fabric supplied n. exc 4 kg and fixed complete to wood or steel members complete all as specified and directed.

Surface Excavation in hard/dense soil n,exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm grade stone aggregate) finished fair and rough as in sub base Complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as foor/staps, complete as all specified and directed.

Removing Excavated soil to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm (salts glazed ware ,AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes, grade 'A', laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

M & L for 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in cover slab for manholes including necessary form work complete all as specified and directed (reinforcement shall be measured and paid seperately)

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

BOQ ( Sch A ) E/M Works Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone/ PCC block masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 105 above but one light point controlled by two Nos of two way switch.

All as per item No 105 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 105 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No.105 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size multi stranded copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F switch piano flush type single pole, Two way 6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SP, 240 volts, AC, C curve, 10 KA 6 to 32 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SPN , 240 volts, AC, B curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB DP , 240 volts, AC, C curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unserviceable MCB S & F MCB TPN , 415 volts, AC, C curve, 10 KA 100 Amps complete all as specified & directed.

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F sheet metal enclusure for DBs(double door type) Triple pole and neutral 6 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

Taking out old unservicable Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm stranded copper conductor PVC complete all as specified and directed (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in hard/dense soil or soft/disintegrated rock, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed NOTE:- i) Earth lead beyond 7.5 m from electrode to earth terminal point/main switch board & GI pipe light grade 15 mm dia for protection against mechanical damage to lead shall be measured separately. ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

S & F call bell ding dong AC, 230V single pole fixed over with and including sunk pressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite sheet cover fixed with brass screw complete all as specified and directed,

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S& F LED Bulb of 9 watt complete all as specified and directed,

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed.

S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed,

Removing of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for sand cushioning in trenches including spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified and directed Note: The punned thickness of sand shall be measured and paid.

M&L for laying of bricks well burnt sub class ‘B’ (old size) laid flat for cable protection width equal to the lengrth of brick complete all as specified and directed

M & L for galvanised steel water tubing 'light grade' 40 mm bore with all GI fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed .

Supply & Fixing LED street light fitting 60 W pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade 25/32/40 mm and provn of electric supply to fitting from junction box by means of PVC Sheathed multi-stranded aluminium conductor cable of 2.5sqmm for phase and neutral & 1.5 sqmm as earth wire complete all as specified and directed. Make Bajaj/Philips/Crompton/Havells

Supply & Fixing LED street light fitting 35W pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade 25/32/40 mm and provn of electric supply to fitting from junction box by means of PVC Sheathed multi-stranded aluminium conductor cable of 2.5sqmm for phase and neutral & 1.5 sqmm as earth wire complete all as specified and directed. Make Bajaj/Philips/Crompton/Havells

Supply and fixing Junction Box made up of High quality thermoplastic polycarbonate enclosure with IP 65 degree of protection, weather proof, corrosion proof, dust proof, insulted and shock proof, fire retardant non toxic material with internally embedded gasket with 10 Amp MCB and 4 nos busbar terminal of size 200x160x98 mm of make Hensel or equivalent make of Sintex/ Universal complete all as specified and directed

Supply & Fixing Weather proof flat twin core cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 4 Sqmm size, served with inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed.

M/S NAYAL ELECTRICALS

M/s RK JOSHI&SONS

DEEPAK KUMAR BINWAL

Bajetha Construction

NK CONSTRUCTION

KISHORE CHAND DINESH CHAND