REPAIR/REPLACEMENT AND DAY TO DAY MAINTENANCE OF PERIMETER, SECURITY LIGHTS, STREET LIGHTS, BUILDING SECURITY LIGHTS, POST TOP LANTERN, GARDEN LIGHTS, HIGH MASTS LIGHTS UNDER GE (A) AHMEDABAD

Amount

Excavation in trenches in any type of hard/dense soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays complete all as specified and directed

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed

Supplying, laying or fixing or passing through pipe, testing and commissioning in renewal 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable of size 10 sqmm 4 core complete all as specified and directed

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 50 mm and inner dia 38 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete all as specified and directed

Supply and erection in vertical position Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (9.00 metres long) all as specified duly factory painted with two coats of black bituminous paint internally through out and externaly for embeded portion and painting with one coat of red oxide primer, applying two coats of synthetic enamel aluminium paint on remaining exposed surfaces after errection complete, painting with synthetic enamel paint of colours black and yellow alternate strips of 30cm width upto 1.5 mtr from the top of coping complete including making suitable holes where required all as specified and directed .Note : PCC in foundation, coping, Earth work ( Excavation, Returning & refilling and removal) will be measured and paid separately under relative items of Sch 'A'.

Plain cement concrete (1:4:8) type D-2 (Using 40 mm graded crushed stone aggregate) as in foundation for poles mass concretes or in any indicated positions etc complete all as specified

Plain cement concrete (1:3:6) type C-2 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete for stay complete all as specified and directed

Plain cement concrete (1:2:4) type B-2 (Using 20 mm graded stone aggregate) for coping of pole complete all as specified

Supply and fixing GI tubing light grade ISI marked with requisite fittings laid in trenches or crossing roads/paths/culverts/along poles/walls complete all as specified and directed for 50 mm dia size complete all as specified and directed

Supply and fixing GI tubing light grade ISI marked with requisite fittings laid in trenches or crossing roads/paths/culverts/along poles/walls complete all as specified and directed for 80 mm dia size complete all as specified and directed

Supply, installation, testing and commissioning LED street light fitting including driver with energy saving and enviornmental friendly made up of pressure die cast aluminium housing with high power LED 70 Watt as lighting conforming to IS-10322 (Part 5/Section 3) 2012 and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and IK07 with 10KV inbuilt Surge protection device Reqmt of all sundry items ie three core copper wire 1.5 Sqmm PVC sheathed, insulation tape, screw, clamps, nuts and bolts for fixing of street light with dismantling are to be included in quoted rate. Note:(i) size should be minimum 45 mm dia. (ii) Minimum 5 years guarantee period of LED fittings (iii) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt. (iv) Power factor more than 0.9 (v) Contractor shall submit LM 79 and LM 80 test reports from manufacturer from NABL laboratory.

Supply and Fix, LED bulb, with minimum lumens of 100 lumens/ watt, brght white, in bulb holder (bulb holder not included), B22 base of wattage as mentioned below

Supply and fix, Aluminium/ Plastic Street Light Bulb Cover, as suitable for above 70W and 50W bulbs, with polycarbonate front cover, with internal reflective coating/ surface, dolphin bulge type, with internal B22 Bulb Holder, PVC/Polycarbonate type, IP65 rating (or higher), with cord grip cap suitable for pendant fittings, with suitable fasteners to suit street light bracket/ holder complete all as specified and directed

Supply and fix LED Flood Light fitting 70 Watts made out of pressure die cast aluminium housing and IP 66 protection complete including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed with fwg specifications. (a) Power Consumption : 70 Watt (c) Colour Rendring Index (CRI) >80 (d) Housing Material : Pressure diacast aluminium alloy with toughned glass cover (e) Efficiency : Not less than 120 Lumen /Watt (f) Colour Temp (CCT) : 5700K (g) Power Factor (PF) : > 0.90 (h) IP Rating : IP 65 (j) Total Harmonic Distortion (THD) < 10% (k) Average Life > 50000 Hrs (l) Operating Voltage : 140-270V (m) Surge Protection upto 10 KV with built in SPD, open circuit protection and other safety as per IS 15885 Part 2/Sec 13

Supply and fix LED Flood Light fitting 150 Watts made out of pressure die cast aluminium housing and IP 66 protection ( for HIGH MAST LIGHTS) complete including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed with fwg specifications. (a) Power Consumption : 150 Watt (c) Colour Rendring Index (CRI) >80 (d) Housing Material : Pressure diacast aluminium alloy with toughned glass cover (e) Efficiency : Not less than 120 Lumen /Watt (f) Colour Temp (CCT) : 5700K (g) Power Factor (PF) : > 0.90 (h) IP Rating : IP 65 (j) Total Harmonic Distortion (THD) < 10% (k) Average Life > 50000 Hrs (l) Operating Voltage : 140-270V (m) Surge Protection upto 10 KV with built in SPD, open circuit protection and other safety as per IS 15885 Part 2/Sec 13

Supply and fix street light waterproof Junction boxes of dimension (200x150x100 mm) pressfit's IP65 Waterproof (without rubber grommet) are made of top-quality ABS plastic on all sides for cable entry including cable glands, Connector including all connections.

Supply and fix street light bracket made of GI pipe light grade bend to 45 Degree angle of 40 mm dia, 1.5 m long of 40 x 6 mm flat iron clamps, nuts / bolts / washers & painted with 2 coats of aluminium paint over a coat of red oxide primer on clamps complete all as specified and directed

S&F of PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm three core 1100 volt grade from Junction box to street light fitting as required.

Labour & tools for trimming tree branches upto 100 mm girth of any location around existing LT street light poles giving clearance of 1.5 m on all sides complete all as specified and directed (Note:- Trimming of tree branches irrespective in numbers in each tree shall be measured as one unit).

Labour and tools for rectification of defects in any type of street light fittings / security light fittings under GE (A) Ahmedabad cantonment including sundry items like insulation tapes, nuts, bolts, washers, holders of LED /HPSV/ MH/T5 fittings, LED driver, starters & bipin holders of tube light fittings as required. (Note :- Items other than sundry items mentioned above required for repair / renewal to make functional street lights shall be measured & paid separately against item no 18 as supply only but labour cost of their renewal is included in this item).

Supply and fixing in replacement Electronic LED Driver Suitable for 70 Watt streetlights fitting complete all as specified and directed

Supply and fixing in replacement Electronic LED Driver Suitable for 90 -200 Watt Flood lights fitting complete all as specified and directed

Labour & tools for horizontal boring through road / path / floor for passing UG cables by using trench less technology for laying upto 100mm dia pipe complete all as required. Note : GI / DWC pipe will be measured and paid seperately.

Material and labour for painting of street light poles upto 11 mtr long with one coat of red oxide primer and two coat of synthetic enamel aluminium paint from 1 mtr above ground to top of pole including street light bracket & clamp and applying synthetic enamel black/yellow paint for 1 mtr length from ground. Painting of pole number as per existing all as specified and directed

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size 6 Sq mm complete all as specified and directed

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size 10 Sq mm complete all as specified and directed

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size 16 Sq mm complete all as specified and directed

Supply & fixing of 15W/ Mtr LED Strip (Warm White) for cove lighting complete with driver & in all respect including testing & commissioning on completion as per make Havells Cat No. LHEHCPPGNN1B024 PROFESSIONAL LED strip IP-65 WH White or techno comeercial equvivalent in Philips/Wipro.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

S&F LED Garden Light Cone series acts as an imposing street furniture make Havells cat No CONEBLS8WLED830PSYMTOPCM (1.0 M) The elegant yet minimalistic design acts a silent observer and giving light, diffuser at the upper portion adds functional value into landscape environment comeercial equvivalent in Philips/Wipro. .

Supply and Fixing 4 Mtr Tricolour Circular Column Light 60 W , constructed from Galvanized iron, ensuring durability and resistance to corrosion. The pole is throughtfully designed to provide optimal illumination and aesthetics, featuring a striking combination of Orange, white and green colours. Additionally, the pole is equipped with a square base plate made up of 10mm thick M S Cast iron. Make:- Eveready having Cat No DTRCL4060-01.

Supply and fixing Tri-colour LED design Tiranga Strip Light , 18 Mtr Roll, input power 20Watt/Meter,230 volts AC outdoor type with IP 65 Waterproof protection complete all as specified and directed.

M&L for detection and locating of cable fault in underground damaged LT cables of any size of any length and any type using cable fault detector/locator machine of accuracy to 2 mtrs, vehicle mounted for various locations under GE (A) ahmedabad including necessary excavation & earthwork in any type of strata of size reqd for visually inspection/repairing the damaged cable when and where directed by Engr-in-Charge. Complete all as specified and as directed.

M&L for taking out of unserviceable LT cable XLPE, aluminium armoured type up to 25 Sqmm 4 core from existing complete all as directed by Engr-In-Charge..

Supply and Fixing of LED Tube light 60W complete all as specified and directed

Supply and Fixing of cover for street light, for LED tube light fitting (tube light not iucluded), with polycarbonate/acrylic front cover and polycarbonate/aluminium back casing complete all as specified and directed

Shree Karni Construction (BID ID -3336098)

ALBA AC AND REF SERVICES (BID ID -3329727)

Electricals India (BID ID -3327915)