DISMANTLING AND TRANSPORTATION OF STARTING-UP-SOLUTION TANK FROM PHASE 1 TO PAT AREA

DISMANTLING AND TRANSPORTATION OF STARTING-UP-SOLUTION TANK FROM PHASE 1 TO PAT AREA

Dismantling and Transportation of Starting-up-Solution Tank Work Involves: After obtaining clearance from the Department, the lines connecting to the vessel must be dismantled. The dismantling can be done by unbolting the flanges or cutting the pipelines without damaging the vessel. The contractor is responsible for collecting and transporting suitable structural materials, plates etc. from the store/plant area to the site and fabricating suitable saddle support and temporary structural supports for the safe transportation of the tank. Provide pad plates and hooking points made of SS316L over the tank. Arrange a suitable trailer for transportation. If any chipping of the foundation is required during lifting, it falls under the contractor's scope. The tank must be lifted safely, placed over the saddle support on the trailer, fastened securely, and transported to the Phase 2 - PAT Area. The tank along with the sleepers must be unloaded and placed securely at the location in horizontal position as instructed by the Technician/Officer-in-Charge. The pipes, pipe racks, height barriers obstructing the safe lifting and transportation of the tank along the route must be dismantled and reinstalled after transportation.During the transportation of the tank, if any obstructions are encountered in the form of pipe racks that cannot be dismantled, it will be necessary to lift and maneuver the tank over the pipe racks using a crane to facilitate movement. Any damage to the tank caused during lifting, transportation, and unloading must be repaired by the contractor at no additional cost. Any obstructions or modifications encountered on the road during transit must be addressed by the contractor after obtaining the necessary clearances from relevant departments. Any additional machinery required for these modifications falls under the contractor's scope. The temporary structures fabricated for lifting, transportation, and unloading shall be cut or ground to suitable dimensions for reuse and shifted to the designated area as per the instructions of the Technician/Officer-in-Charge. The contractor should bring necessary tools and tackles for the work. Tank Dimensions: Height 7.5 m, Diameter 6 m; Weight = 9000 Kg, MOC - SS, Tank Thickness = 6 to 10 mm.

BASHEER V P (BID ID -3183146)

VIKRAMAN NAIR S (BID ID -3183262)

AMMA CONSTRUCTION CORPORATION (BID ID -3182708)