Construction for Development of Heliport at Rakkar in Tehsil Dharamshala Distt. Kangra (HP)

Excavation in foundation, trenches etcetra. by mechanical means (Hydraulic excavator)/ manual means in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetra; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax,GST and any taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M - twenty) design mix to obtain the compressive strength of 20N/MM2 (Twenty Netwon per Square millimetre) for reinforced cement concrete work the cement contents not less than 330 kg ( three hundred thirty kilogrma ) per cubic metre or as per approved desing mix for work upto plinth level to give a smooth surface mechnically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard steeing of concrete , improve work ability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing plinth protection with 50mm (fifty millimetre) thick interlocking paver block of NTC with 23cm(twenty three centimetre) dia half round RCC pipe for drainage purpose fixed over 10cm(ten centimetre) thick cement concrete 1:4:8((one cement : 4sand :8 gradedstone) in bedding/ haunching for pipe complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (one hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Applying a coat of residual petroleum bitumen 80/100 (eighty/hundred) using 1.70 Kgs. (one decimal seven zero kilogramms) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter) with cement contents not less than 360 kg (three hundred sixty Killogramme) per cubic meter or as per approved desing mix and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works up to plinth level to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated reinforced concrete work Grade M-25 (Twenty five ) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter) with cement contents not less than 360 kg (three hundred sixty Killogramme) per cubic meter or as per approved design mix and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works above plinth lavel to all floor level to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work including of material within all leads lifts and other incidentals as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TATA Tiscon /SAIL thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.