Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 CrAccepted-AOC | ₹3.6 Cr | L1 | Accepted-AOC L1. Hence, Awarded. |
| 2 | L2₹3.9 Cr+₹34.8 L (9.79%)Rejected-Finance MAIN STREET GONDER 35 VILL GONDER KARNAL HARYANA 132024 | KARNAL | KARNAL | HARYANA | 132024 | ₹3.9 Cr+₹34.8 L (9.79%) | L2 | Rejected-Finance L2 Bidder |
| 3 | L3₹4.0 Cr+₹47.2 L (13.3%)Rejected-Finance | ₹4.0 Cr+₹47.2 L (13.3%) | L3 | Rejected-Finance L3 Bidder |
| 4 | L4₹5.3 Cr+₹1.8 Cr (49.9%)Rejected-Finance OIL MILL ROAD OIL MILL COMPOUND LINGARAJAPURAM BANGALORE KARNATAKA 560084 | BENGALURU URBAN | KARNATAKA | 560084 | ₹5.3 Cr+₹1.8 Cr (49.9%) | L4 | Rejected-Finance L4 Bidder |
| Sl No | Description | Qty | Unit | SAMEER GLAZING SYSTEM PRIVATE LIMITED L3 | Technospan structures pvt ltd L4 | Pavee Construction L2 | WESTERN OUTDOOR STRUCTURES PRIVATE LIMITED L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Supply, Providing ,Fabricating, Assembling , erecting and placing in position Tubular Structure (Curved Roof Trusses) consisting of tubular structure made from MS built-up section :- plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, conforming to IS 1161/4923, Grade Yst 310, thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. using water jet 3-D cutting system for obtaining smooth 3-dimensional curvature with special plate connector, pinion joints, Plates, hollow sections etc. using SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates,nuts and bolts, hollow sections etc. and including transportation, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to complete this work as per approved drawings. The tubular structure system with plate connectors, pinion joints, nuts and bolts, foundation bolts of grade 10.9/anchor bolts of approved make etc. is to be provided. The complete structure shall be painted with epoxy primer of 75 micron DFT (low VOC i.e. less than 250 gm/ltr),intermediate coat with micaceous iron oxide of 100 micron DFT and finishing coat with two components high Gloss Acrylic Polyurethane Finish Paint of 75 micron DFT(low VOC i.e. less than 250 gm/ltr) on steel work at all locations prepared by sand blasting and applied with airless spray in required DFT (dry film thickness) for each coat as per technical specifications and direction of Engineer-in-Charge. The contractor has to prepare shop drawings also which have to be approved by Engineer-in-charge/PMC before start of work. The cost includes supplying, fabricating, erecting of structure including welding, total drainage system including core cutting in the RCC slab, sand blasting, scaffolding, cost of primer, intermediate coat and polyurethane paint application etc. complete. (Please note that rate is inclusive of erection, scaffolding or by any other means complete in all respects.) | 1,06,500 | Kg | 145 ₹1,54,42,500 | 150 ₹1,59,75,000 | 140 ₹1,49,10,000 Lowest | 140.32 ₹1,49,44,080 |
| 2.00 | Providing, fabricating, assembling and erection of pre stressed Tensile Membrane Fabric structure in desired profile as per conceptual drawing , with membrane as per technical specifications over steel structure frames with all fittings and fixtures such as Galvanized MS End Plate, Shackles, Rigging Screws , Turnbuckles, swedge, fork , keder rods & galvanized MS strands with stainless steel end terminals complete as per Drawing / Detail & as per particular/ technical specifications and as per the directions of Engineer‐in‐charge. (Rate includes cost of fabric, patterns, forming, cutting, fabrication, hot weld stitch of fabric, Transport to the site, assembling and installation with GI strands, hardware, EPDM gasket and required accessories wherever required complete including lifts up to all heights, tools & plants, and necessary scaffolding etc. required for all operations in all respect as per direction of Engineer‐In‐Charge). (Note: (i) Actual surface area of canopy shall only be measured for payment.
(ii) Galvanized strands, Galvanized MS end plate only shall be measured separately under respective item.) | 6,100 | Sqm | 2,675 ₹1,63,17,500 | 2,450 ₹1,49,45,000 Lowest | 2,500 ₹1,52,50,000 | 2,487 ₹1,51,70,700 |
| 3.00 | Fabricating wherever required, assembling , erecting for the balance work and placing in position Tubular Structure (Curved Roof Trusses) consisting of tubular structure made from available MS built-up section :- plates confirming to IS 2062 Grade Yst 350, available Tubular Structure:- made from Steel hollow sections, conforming to IS 1161/4923, Grade Yst 310, thickness up to 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, plates, hollow sections etc. using water jet 3-D cutting system for obtaining smooth 3-dimensional curvature with special plate connector, pinion joints, Plates, hollow sections etc. using SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates, nuts and bolts, hollow sections etc. and including transportation, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to complete this work as per approved drawings. The tubular structure system with plate connectors, pinion joints, foundation bolts of grade 10.9 etc. are already available at site. The structure shall be touched up with paint at the newly welded portions with epoxy primer of 75 micron DFT (low VOC i.e. less than 250 gm/ltr) and finishing coat with two components high Gloss Acrylic Polyurethane Finish Paint of 75 micron DFT (low VOC i.e. less than 250 gm/ltr) on steel work wherever required and applied with airless spray in required DFT (dry film thickness) for each coat as per technical specifications and direction of Engineer-in-Charge. The contractor has to follow available shop drawings approved by Engineer-in-charge/PMC. The cost includes balance fabricating, erecting of structure including welding wherever required, sand blasting if required at specific locations, scaffolding, cost of primer at welded joints as per the requirements and polyurethane paint application etc. complete. (Please note that the structural material available at site with AAI will be handed over officially to the agency after award of work under this item. Agency shall use this material which has already been fabricated and only partial fabrication to be done while assembling. Nothing extra shall be paid for transportation, cleaning etc of these available material stacked at AAI Premises. If any extra new material required as per the site conditions will be paid as per actual measurement under the relevant item. Rate is inclusive of erection, scaffolding, cost of primer at welded joints as per the requirements and polyurethane paint application etc complete in all respects. The agency has to consider the available material at site during participating in tender and quote their bid accordingly). | 1,41,500 | Kg | 50 ₹70,75,000 | 150 ₹2,12,25,000 | 47.5 ₹67,21,250 | 28 ₹39,62,000 Lowest |
| 4.00 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas.copping, seating and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
30 mm thick granite stone of approved shade/colour/size area of slab less than 0.5 sqm | 120 | Sqm | 5,435 ₹6,52,200 | 1,450 ₹1,74,000 Lowest | 6,000 ₹7,20,000 | 4,000 ₹4,80,000 |
| 5.00 | Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving SS Bolts on trusses for fixing of Tensile Fabric complete as per direction of Engineer - in charge. | 710 | Kg | 670 ₹4,75,700 | 450 ₹3,19,500 Lowest | 1,000 ₹7,10,000 | 700 ₹4,97,000 |
| 6.00 | Providing and laying matt finished vitrified tile of size 600x600x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg /sqm including grouting the joints with white cement and matching pigments etc. the tiles must be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. | 100 | Sqm | 2,100 ₹2,10,000 | 1,500 ₹1,50,000 | 2,500 ₹2,50,000 | 1,200 ₹1,20,000 Lowest |
| 7.00 | Providing Engineering Consultancy Services for Design, Engineering, and patterns of Architectural Membrane, cables and related perimeter attachments & hardware including associated structural steel members, RCC foundation, rain water drainage system including core cutting, supporting member for electrical installation etc. with all relevant calculation sheet and vetted by I.I.T/NIT/ Govt. Engg. college. Issue of "Good for Construction drawings" and revision of drawing and its vetting if required during execution etc. as specified in tender document and any other details related to consultancy work which are essential for successful execution of work etc. complete as per direction and satisfaction of Engineer in-charge. The design Consultancy job includes for Departure Area Canopy and nothing extra shall be payable. | 1 | Job | 1,25,000 ₹1,25,000 Lowest | 5,50,000 ₹5,50,000 | 4,95,000 ₹4,95,000 | 4,00,000 ₹4,00,000 |
Tender Value
₹4.9 Cr
EMD Value
₹9.8 L
Closing Date
30 Aug 2024, 6:00 pmClosed
AGM (Engg.-Civil)
O/o DGM (Engg.-Civil) Project, Airports Authority of India, Tiruchirappalli International Airport, Tiruchirappalli - 620007.
Construction of Departure level Tensile Canopy and Balance Conical Canopy at Arrival level including drainage system at NITB, Trichy Airport. S.H. Civil Works
2024_AAI_204390_1
AAI/SR/TRY/PROJ/CANOPY/2024/
Open Tender
Civil Works
Item Rate
180 days
Tiruchirappalli International Airport
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,180
₹9.8 L
26 Sept 2025
9 Aug 2024
2 Sept 2024
9 Aug 2024
30 Aug 2024
9 Aug 2024
9 Aug 2024 - 16 Aug 2024
Amount
Supply, Providing ,Fabricating, Assembling , erecting and placing in position Tubular Structure (Curved Roof Trusses) consisting of tubular structure made from MS built-up section :- plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, conforming to IS 1161/4923, Grade Yst 310, thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. using water jet 3-D cutting system for obtaining smooth 3-dimensional curvature with special plate connector, pinion joints, Plates, hollow sections etc. using SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates,nuts and bolts, hollow sections etc. and including transportation, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to complete this work as per approved drawings. The tubular structure system with plate connectors, pinion joints, nuts and bolts, foundation bolts of grade 10.9/anchor bolts of approved make etc. is to be provided. The complete structure shall be painted with epoxy primer of 75 micron DFT (low VOC i.e. less than 250 gm/ltr),intermediate coat with micaceous iron oxide of 100 micron DFT and finishing coat with two components high Gloss Acrylic Polyurethane Finish Paint of 75 micron DFT(low VOC i.e. less than 250 gm/ltr) on steel work at all locations prepared by sand blasting and applied with airless spray in required DFT (dry film thickness) for each coat as per technical specifications and direction of Engineer-in-Charge. The contractor has to prepare shop drawings also which have to be approved by Engineer-in-charge/PMC before start of work. The cost includes supplying, fabricating, erecting of structure including welding, total drainage system including core cutting in the RCC slab, sand blasting, scaffolding, cost of primer, intermediate coat and polyurethane paint application etc. complete. (Please note that rate is inclusive of erection, scaffolding or by any other means complete in all respects.)
Providing, fabricating, assembling and erection of pre stressed Tensile Membrane Fabric structure in desired profile as per conceptual drawing , with membrane as per technical specifications over steel structure frames with all fittings and fixtures such as Galvanized MS End Plate, Shackles, Rigging Screws , Turnbuckles, swedge, fork , keder rods & galvanized MS strands with stainless steel end terminals complete as per Drawing / Detail & as per particular/ technical specifications and as per the directions of Engineer‐in‐charge. (Rate includes cost of fabric, patterns, forming, cutting, fabrication, hot weld stitch of fabric, Transport to the site, assembling and installation with GI strands, hardware, EPDM gasket and required accessories wherever required complete including lifts up to all heights, tools & plants, and necessary scaffolding etc. required for all operations in all respect as per direction of Engineer‐In‐Charge). (Note: (i) Actual surface area of canopy shall only be measured for payment. (ii) Galvanized strands, Galvanized MS end plate only shall be measured separately under respective item.)
Fabricating wherever required, assembling , erecting for the balance work and placing in position Tubular Structure (Curved Roof Trusses) consisting of tubular structure made from available MS built-up section :- plates confirming to IS 2062 Grade Yst 350, available Tubular Structure:- made from Steel hollow sections, conforming to IS 1161/4923, Grade Yst 310, thickness up to 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, plates, hollow sections etc. using water jet 3-D cutting system for obtaining smooth 3-dimensional curvature with special plate connector, pinion joints, Plates, hollow sections etc. using SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates, nuts and bolts, hollow sections etc. and including transportation, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to complete this work as per approved drawings. The tubular structure system with plate connectors, pinion joints, foundation bolts of grade 10.9 etc. are already available at site. The structure shall be touched up with paint at the newly welded portions with epoxy primer of 75 micron DFT (low VOC i.e. less than 250 gm/ltr) and finishing coat with two components high Gloss Acrylic Polyurethane Finish Paint of 75 micron DFT (low VOC i.e. less than 250 gm/ltr) on steel work wherever required and applied with airless spray in required DFT (dry film thickness) for each coat as per technical specifications and direction of Engineer-in-Charge. The contractor has to follow available shop drawings approved by Engineer-in-charge/PMC. The cost includes balance fabricating, erecting of structure including welding wherever required, sand blasting if required at specific locations, scaffolding, cost of primer at welded joints as per the requirements and polyurethane paint application etc. complete. (Please note that the structural material available at site with AAI will be handed over officially to the agency after award of work under this item. Agency shall use this material which has already been fabricated and only partial fabrication to be done while assembling. Nothing extra shall be paid for transportation, cleaning etc of these available material stacked at AAI Premises. If any extra new material required as per the site conditions will be paid as per actual measurement under the relevant item. Rate is inclusive of erection, scaffolding, cost of primer at welded joints as per the requirements and polyurethane paint application etc complete in all respects. The agency has to consider the available material at site during participating in tender and quote their bid accordingly).
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas.copping, seating and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 30 mm thick granite stone of approved shade/colour/size area of slab less than 0.5 sqm
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving SS Bolts on trusses for fixing of Tensile Fabric complete as per direction of Engineer - in charge.
Providing and laying matt finished vitrified tile of size 600x600x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg /sqm including grouting the joints with white cement and matching pigments etc. the tiles must be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
Providing Engineering Consultancy Services for Design, Engineering, and patterns of Architectural Membrane, cables and related perimeter attachments & hardware including associated structural steel members, RCC foundation, rain water drainage system including core cutting, supporting member for electrical installation etc. with all relevant calculation sheet and vetted by I.I.T/NIT/ Govt. Engg. college. Issue of "Good for Construction drawings" and revision of drawing and its vetting if required during execution etc. as specified in tender document and any other details related to consultancy work which are essential for successful execution of work etc. complete as per direction and satisfaction of Engineer in-charge. The design Consultancy job includes for Departure Area Canopy and nothing extra shall be payable.
Pavee Construction
SAMEER GLAZING SYSTEM PRIVATE LIMITED
Technospan structures pvt ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .