WELCOME MAINTENANCE INCLUDING INTERNAL ELECTRIFICATION TO OFFICERS MD ACCN IN NORTHERN AND CENTRAL SECTOR AT MIL STN KOTA

Amount

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frame, glazing with putty or fixed with beads complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 25 mm dia pipes complete all as specified and directed.

Supply, fixing, laying & testing galvanised iron water tubing 'medium grade' with and including all new GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including making good the disturbed surface with cement conc. 1:2:4 and rendering to match the surface complete all as specified and directed for the following bore of pipes: - 15 mm bore

20 mm bore

25 mm bore

All as per item No 8.00 (here-in-before) but except GI pipes (GI pipes obtained from taking down shall be reused under this item), complete all as specified and directed for the following bore of pipes: - 15 mm bore

20 mm bore

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position & including dismantaling existing water tank of any type, complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position & including dismantaling existing water tank of any type, complete all as specified and directed.

S&F 20 mm bore dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in renewal of 20 mm bore dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in renewal of stop valves, fancy type, chromium plated brass with long shank and cup (concealed type), screwed down, high pressure, both ends screwed to iron pipe or for union, dia of pipe 15 mm, complete all as specified and directed.

S&F in renewal of bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in renewal of long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in renewal of stop valve 20 mm nominal bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in renewal of angle valve 15 mm nominal bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in renewal of pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in renewal ofs PTMT alloy toilet cabinet with mirror of overall size 350x450 mm and fixed to wall complete all as specified and directed, complete all as specified and directed.

S&F in renewal of glass shelf assembly of 6 mm thick glass, 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws etc, complete all as specified and directed.

S&F in renewal of vitreous china wash hand basin white with flat back of size 550x400 mm, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe of 32 mm bore, one pair of 600 mm long cast iron brackets, complete all as specified and directed.

S&F in renewal of vitreons china wash down water closet pan, padestal type, white, with 'p' or 's' trap & including recessed bottom PVC seat cover of white colour and mild steel chromium plated hinging device but excluding flushing cistern, flush pipe and fixing bolt and making connections to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, fixed in repairs, complete all as specified and directed.

S&F in renewal of vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest incl providing lime concrete bedding and connecting to flusing cistern complete all as specified and directed.

S&F in renewal of PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action top push type with inlet ball valve and float including taking down existing complete all as specified and directed.

M&L for preparation of old previously decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old previously decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying one coat of distemper oil emulsion (washable) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying two coats of distemper oil emulsion (washable) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L complete removal of existing treatment from walls, chajjas and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces on walls including cornices, pillasters etc, complete all as specified and directed.

M&L preparing old previously treated surfaces of ceiling, plastered or unplastered & applying two coats of distemper oil emulsion (washable) on ceiling including cornices, pillasters etc, complete all as specified and directed.

M&L complete removal of existing treatment from walls, chajjas and applying 2mm thick layer of wall care putty and over it applying two coats of distemper oil emulsion (washable) over a coat of primer, complete all as specified and directed.

M&L complete removal of existing treatment from walls, chajjas and applying two coats of cement base paint over & including a coat of suitable primer, complete all as specified and directed.

M & L complete removal of existing treatment from walls, chajjas and applying two coats of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preperation of old painted surfaces of wood or wood based materials of any description not otherwise described exceeding 10cm in girth or width & applying one coat of synthetic enamel paint (Ist quality), complete all as specified and directed.

M&L for preparing old painted surfaces of steel or iron work of any description not otherwise described exceeding 10cm in width or girth & applying one coat of synthetic enamel paint (Ist quality), complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL) and removal all rubbish material outside of MD land complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not other wise specifically provided for complete as specified and directed.

Dismantling floor, hearth or wall tiling/ terrazzo including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in path/sub base etc, finishing the surface fair and even, complete all as specified and directed.

M&L dry clean Sand filling under floors including watering and consolidation, complete all as specified and directed. Note: Depth of sand shall be measured after punning.

M&L Machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection/Path/PCC paving etc including finishing the surface even & smooth without using extra cement, with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where dirtected and providing 6 mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight), complete all as specified & directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring/sub base finished rough to receive floor finishes/screed complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), laid in panels, finished even and smooth using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on stone masonry surfaces or other than fair faces of brick work in cement mortar 1:4, surface finished even and fair to receive tiles, stone etc, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 300x 200x7 mm/ 350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes even and fair complete and all as specified and directed.

M&L 20 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes even and fair complete and all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for light coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for light coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and including dismantling of old u/s kota stone complete all as specified and directed.

M&L for machine cut kota stone slab as in skirting, dado, risers etc, 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and including dismantling of old u/s kota stone complete all as specified and directed.

M&L green marble slab 18-20 mm thick, table rubbed and polished in cooking platform, jambs, cills, pillars, tread, risers, platform for WHB etc including bull nosing to exposed outer edges, set in CM 1:4 bedding and pointing with white cement mixed with pigment and including dismantling of old u/s marble complete all as specified and directed.

M&L for cutting/grinding of the existing Terrazzo/Marble/Kota stone flooring by mechanical process using carborundum stone of appropriate grit, cleaning and finally mirror polishing by applying wax polish complete all as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick/concrete surfaces of ceiling in CM 1:3 finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying 1 mm thick wall care putty as per manufacturer's instructions and over it applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered surfaces of walls over a coat of white wash including preparation of surfaces, complete all as specified and directed.

M&L applying three coats of white wash after preparation of new plastered surfaces of ceiling, complete all as specified and directed.

S&F in renewal of sink with draining board made of stainless steel 1mm thick with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality PVC waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 200 mm complete all as specified and directed.

S&F in renewal of stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

S&F in renewal of mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed.

S&F in renewal of mixture valve, chromium plated brass, fancy type for wall in two/three pin fixed to iron pipe complete all as specified and directed.

S&F in renewal of plastic water closet seat cover for EWC, white with recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Taking down chowkhat or frames not exc 1.50 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and not exc 4.00 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any description and Re-fixing of shutters exc. 1 Sqm but n. exc. 2 Sqm each in same opening & including renewal of screws etc. complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any description and Re-fixing of shutters n. exc. 1 Sqm each in same opening & including renewal of screws etc. complete all as specified and directed

S&F 35mm thick factory made IInd Class Hard wood (Hollock) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F 35mm thick factory made IInd Class Hard wood (Hollock) paneled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

M&L for 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match & including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium window and ventilator shutters, side hung without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No.), suitable handle (1 No), complete all as specified and directed.

S&F in renewal of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F Ist class soft wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads to Store, complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2020).

S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II.

S&F of 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in renewal of 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in renewal of cupboard shutters of approved size/as required at site including frame made out of 0.80 mm thick mild steel sheet with frame, 50 mm wide including hinges, handles, locking arrangements etc, including applying two coats of synthetic enamel paint over a coat of primer with spray machine after preparing the surfaces, complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 290 (GdeE- 165), complete all as specified and directed.

S & F factory made steel windows conforming to IS-1038 with side hung shutters including projection type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handles & steel pag stay complete (without glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. Note :- Glass/SS or MS cloth wire shall be measured and paid for separately under respective items.

S & F factory made steel windows conforming to IS-1038 with side hung shutters including projection type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handles & steel pag stay complete (with glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. Note :- Glass/SS or MS cloth wire shall be measured and paid for separately under respective items.

S & F factory made steel windows or ventilators, conforming to latest IS, fixed type, with glazing bars, dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. Note :- Glass/SS or MS cloth wire shall be measured and paid for separately under respective items.

S&F for 125 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in renewal of 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F for 125 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt n.less then 12 mm dia and incl a minimium of 6 bolt & nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100 mm long mild steel cold rolled med weight butt hinges, fixed with MS screws, complete all as specified and directed.

S&F in renewal of 100 mm long mild steel cold rolled med weight butt hinges, fixed with MS screws, complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F in renewal of 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F mild steel bow handles, oval type, stove enameled black 125 mm long, complete all as specified and directed.

S&F in renewal of 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in renewal of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

S&F in renewal of 200 mm long mild steel ordinary helical door spring including roller and roller plate, complete all as specified and directed.

S & F in renewal of Prelaminated particle board 18/19 mm thick, interior grade, ISI marked as in cupboard shutter / shelves, prelaminated one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, fixed with screws to timber frame work complete all as specified and directed.

S&F in renewal of 19 mm thick modular membrane kitchen cabinet door shutters (made out of MDF boards) in wood grain colour and half round edges, complete all as specified and directed.

S&F in renewal of kitchen basket made of stainless steel, size 435x510 mm including stainless steel guide channel, complete all as specified and directed.

S&F in renewal of ball catches with 8 mm dia steel ball and brass body and striking plate & including letting in and fixed, complete all as specified and dirceted.

S&F in renewal of auto close hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.

S&F in renewal of 18/19 mm thick prelaminated MDF board, both side off white shade or shade as approved by Engineer in Charge, fixed as in shelf and partition of kitchen cabinet, complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paint over and including a coat or pink primer on wooden surfaces, exceeding 10 cm in width or girth, incl preparation of the new surfaces complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer all as specified and directed.

S&F in renewal of 32mm dia waste coupling of PTMT (half or full threaded) minimum weight not less than 45 grams, complete all as specified and directed.

S&F in renewal of 32 mm bore waste fittings brass CP for wash hand basin, sink etc with long screwed and fly nuts, flange end embedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in renewal of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in renewal of PVC connection, 15 mm size with two PTMT nuts, length of connection 450 mm, complete all as specified and directed.

S&F in renewal of PVC connection, 15 mm size with two PTMT nuts, length of connection 600 mm, complete all as specified and directed.

Dismantling cast iron or reinforced concrete concrete drain pipes 100 mm bore, jointed in CM and taking out from trenches if required, complete all as specified and directed.

Dismantling cast iron or reinforced concrete concrete drain pipes 75 mm bore, jointed in CM and taking out from trenches if required, complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to wall, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to wall, complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) bend 75 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F stack clamps made out of 50x5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, dia of pipe 100/110 mm, complete all as specified and directed.

S&F stack clamps made out of 50x5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, dia of pipe 75 mm, complete all as specified and directed.

S&F PVC (SWR) 110 mm bore single Junction 'T', equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F PVC (SWR) 75 mm bore single Junction 'T', equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F in renewal of 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in renewal of toilet paper holder of Vitreous China (white), box type, fixed on walls with CP brass screw complete all as specified and directed.

S&F in renewal of continuous piano hinges, mild steel bright finish or electro galvanised, 30 mm width of flap when open, complete all as specified and directed.

S&F in renewal of cast iron (malleable) or mild steel casement stays, size 300mm, with hinged joint and two plates, with studs, complete all as specified and directed.

S&F in renewal of 125 mm size cast iron or malleable cast iron handles, cast type, stove enamelled black, complete all as specified and directed.

S&F in renewal of 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

S&F in renewal of 100 mm long hasp & staple safty type anodised aluminium with mild steel hinge pin bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in renewal of stainless steel tubular curtain rods (Harrison rails), 20 mm dia, with fixing brackets, stops, rollers etc, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles, complete all as specified and directed.

M&L brick work with pulverized fuel Ash-lime bricks (old size fly ash bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:4, complete all as specified and directed.

M&L walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, including finishing the joint, flush as the work proceeds complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm; to block in course masonry (Lime or sand stone), complete all as specified and directed.

M&L for cleaning of walls and floor of sunken portions including picking, sweeping clean and washing down with water to remove dust, dirt etc and Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over cold applied bituminous primer conforming to IS: 3384 @ 0.40 Kg/Sqm, torching overlaps with a propane or a butane gas torch with an overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold applied bituminous primer all as per manufacturer’s instructions, complete all as directed. Note: (i) The waterproofing treatment shall be got carried out through the manufacturer or their authorized applicators only.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

S&F in renewal of brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in renewal of chromium plated over head shower rose of dia not exc 75mm with arm and wall flange complete all as specified and directed.

S&F in renewal of soap dish vitreous china white, approx size 160x160x90mm, embedded in wall, complete all as specified and directed.

S&F in renewal of flushing jet CP for WC (pedestal pattern) & including PVC nozzle and flexible pipe of size 1150mm long, nuts& bolts, fixed to WC, complete all as specified and directed.

S&F in renewal of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in renewal of grating round 140 mm size of PTMT (Minimum weight 50gms), complete all as specified and directed.

S&F in renewal of grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms), complete all as specified and directed.

S&F in renewal of grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

Cleaning and removing all scale and dirt, etc., from existing water tanks and from mouths of circulating pipe etc., capacity of tank exc. 250 ltr but n.exc. 500 ltr, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc., from existing water tanks and from mouths of circulating pipe etc., capacity of tank exc. 500 ltr but n.exc. 1000 ltr, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surface, complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps. Note :- Cutting chases (if required) and making good to match with the adjoining surface shall be included in the unit quoted rate.

All as per item No 158.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 Amp switch.

All as per item No 158.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 Amp switch.

All as per item No 158.00 (here-in-before) but one light point controlled by two, two way switch of 5/6 Amps.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface for one socket outlet 15 amp on independent board including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, Two way, ISI marked, complete all as specified & directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

S & F socket outlet, 5/6 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

S&F switch piano flush type 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S & F socket outlet, 15/16 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

S & F switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type, universal, ISI marked, complete all as specified & directed.

S&F modular switch 1 way 5/ 6 Amps, 1 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular socket, 5/6 Amps, 2/3 pin combined 2 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular switch socket Combination 15/16 Amps, 6 pin, 3 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular metal flush box 8 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 6 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 4 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 3 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 8 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 6 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 4 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 3 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 1 module, ISI marked, complete all as specified & directed.

S&F PVC/polycarbonate lamp holder, angular/batten type with back plate, ISI marked complete all as specified & directed.

S&F in renewal of stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed.

S&F bell push paino flush type, AC, 5 Amp, ISI marked complete all as specified & directed.

S&F in renewal of call bell, AC, 230 volts, single pole, ISI marked complete all as specified & directed.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 4 Sqmm LT, 1100 volts grade, drawn through and including 20 mm size PVC casing & caping fixed on wall/roof/floors surface with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed. Note :- Two runs of cable one run of earth wire and one run of PVCcasing & caping of size 20mm shall be measured as one run length. Cable required for connection to DBs shall deemed to be included and shall not be measured separately. Earth wire shall run inside the PVC conduit.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 6 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia PVC non metallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed. Note for srl item Nos 187 & 188 :- Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm dia shall be measured as one run length. Cable required for connection to DBs shall deemed to be included and shall not be measured separately. Earth wire shall run inside the PVC conduit.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 10 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia PVC non metallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 10 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed.

Fixing only in renewal of LED light fittings, batten type of 10/ 11/18/20/22 Watts complete all as specified and directed. Note for Srl item Nos 189 to 191 :- (i) LED light fittings as stipulated in the items shall be issued under on Schedule 'B' for fixing only at store yard of AGE E/M Kota. (ii) Cost of Necessary tools and plants such as ladders, hydra for renewal of LED light fittings etc and wiring from ceiling rose to light point should be deemed to be included in the unit rate quoted.

Fixing only in renewal of recess LED panel (2'x2') light fittings of 36 watt with and including all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to light fitting connection etc complete all as specified and directed. Note :- (i) Recess LED panel (2'x2') light fittings of 36 watt shall be issued under Schedule 'B' for fixing only at store yard of AGE E/M Kota. (ii) Cost of Necessary tools and plants necessary for repair works shall be arranged by Contractor and wiring from ceiling rose to light fitting should be deemed to be included in the unit rate quoted.

Fixing only in renewal of LED building security light fitting, 35 watt & including 0.55 m long street light bracket made of 32 mm bore GI light grade tubing including necessary clamps, nuts, bolts, washers etc, complete all as specified and directed. Note :- (i) LED building security light fitting of 35 Watts shall be issued under Schedule 'B' for fixing only at store yard of AGE E/M Kota. (ii) Cost of supply of GI bracket as described under the item should be deemed to be included in the unit rate quoted. (iii) Cost of Necessary tools and plants necessary for repair works shall be arranged by Contractor and wiring from ceiling rose to light fitting should be deemed to be included in the unit rate quoted.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, IP-43-IK09 protection grade, earth bar and Din rail, 415 Volts TPN with 4 ways, Double door, complete all as specified and directed. Note for items of MCB DB - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 ways, Double door, complete all as specified and directed.

S&F MCB, 6 to 32 Amps, Single Pole, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S&F MCB, 6 to 32 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S&F MCB, 63 Amps, Triple Pole & Neutral, 415 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 5 and including dismantling of old u/s earthing complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 5 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5 m. Any variation below or above shall be measured and paid for separately under relevant item of this Sch ‘A’.

S & F in renewal of LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.