CONSTRUCTION OF STORE ROOM FOR INSTRUMENTATION EQUIPMENTS AT VMC, (2ND ATTEMPT) VADODARA.

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given

to provide a common basis for bidding. The basis of payment will be the actual quantities of

work ordered and carried out, as measured by the Contractor and verified by the Engineer

and valued at the rates and prices tendered in the priced Bill of Quantities, where

applicable, and otherwise at such rates and prices as the Engineer may fix within the terms

of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties, together

with all general risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to enter

a rate or price shall be deemed to be covered by other rates and prices entered in the Bill

of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in the

items provided in the priced Bill of Quantities, and where no Items are provided the

cost shall be deemed to be distributed among the rates and prices entered for the related

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the contract

documentation shall be made before entering rates or prices against each item in the Bill

8. The method of completed work of payment shall be in accordance with the specification

for Road and Bridge works. For building works specifications for building are to be

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to Clause 29 of

the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting, or

the use of metal wedges and sledgehammers, or the use of compressed air drilling for its

removal, and which cannot be extracted by ripping with a tractor of at least 150 kw with a

single rear mounted heavy duty ripper.

VADODARA MUNICIPAL CORPORATION

NAME OF WORK : CONSTRUCTION OF STORE ROOM FOR INSTRUMENTATION EQUIPMENTS AT VMC

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Excavation for foundation upto 1.5m depth including sorting out and

1 stacking of useful materials and disposing of the excavated stuff upto

meter road.Loose or soft soil 50.00 Cu. M. 206.86

R & B SOR 24-25,I.code 04B001A, P.no.71)

Excavation for foundation from 1.5m to 3.0m depth including sorting out

2 and stacking of useful materials and disposing of the excavated stuff upto

meter road.Loose or soft soil 30.00 Cu. M. 228.29

R & B SOR 24-25,I.code 04B002A, P.no.71)

Providing and Laying Cement Concrete 1:3:6 (1-Cement, 3-Coarse Sand, 6-

3 hand Broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork. 3.00 Cu. M. 3050.40

R & B SOR 24-25,I.no. 5.3.2, I.Code 05003A, P.no.73)

Filling available excavated earth (excluding rock) in trenches, plinth, sides

4 of foundations etc. in layers not exceeding 20cm. In depth consolidating

each deposited layer by ramming and watering. 50.00 Cu. M. 132.33

R & B SOR 24-25,I.no. 4.12, I.code 04006 P.no.69)

Providing and laying brick work in superstructure above plinth level upto

floor two level.

Net Superstructure 27064AA 100.00 Cu. M. 4359.80

R & B SOR 24-25,I.no. 6.13, P.no.86) + It. No. 6.19 p no.

Providing and casting in situ controlled cement concrete M-200 for R.C.C.

return as per drawings including centering shuttering, scaffolding where

necessary, laying vibrating, curing and finishing complete.(A) Height from

R & B SOR 24-25,I.no.0.00,I.Code 27064AA, P.no.237)

Providing ISI Mark T.M.T. Bar 500Fe reinforcement for R.C.C. work,

including bending and placing in position complete upto floor two level.

R & B SOR 24-25,I.no. 5.4.11,i.code 05014C P.no.75)

Providing and laying half brick masonary in common burnt clay building

bricks having crushing strength not less than 35kg./Sq. cm. in cement mortar

1:5 (1-cement, 5:coarse sand)in superstructure above plinth level upto floor

two level 30.00 Sq. m. 662.87

R & B SOR 24-25,I.no. 6.3, P.no. 89) + It. No. 6.32 P. No.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement, 6-coarse sand) laid

over and jointed with grey cement slurry including rubbing and polishing

etc. complete. 70.00 Sq. m. 991.23

R & B SOR 24-25,I.no. 14.43, i.code 14012AA P.no.128)

Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

10 plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete. 300.00 Sq. m. 276.52

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete. 200.00 Sq. m. 334.18

R & B SOR 24-25,I.no. 17.95, i.code 17009, P.no.137)

Distempering with dry distemper of approved brand and manufacture (two

coats) and of required shade on wall surfaces of given an even shade, over

and including a priming coat of whiting after thoroughly brooming the

surface free from mortar dropping and other foreign matter. 500.00 Sq. m. 47.79

R & B SOR 24-25,I.no. 18.38, i.code18016, P.no.141

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc

complete 500.00 Sq. m. 116.24

R & B SOR 24-25,It. No. 19.127,i.code 19031, Pg. no.

Provoding and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

15 panels, including anodised alluminium butt hinges with necessary screws.

(B) Non-decorative type and block board core anodised alluminium butt

hinges in flush door shutters (2) 35 mm thick.

R & B SOR 24-25,I.no. 10.3,I.code 10011, P.no.101)

Providing and fixing extruded aluminum window having extruded

aluminum Colour Powder Coated section frame main outer size 127mm x

38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size

122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of

size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

1. Window(W) 20.00 Sq. m. 2119.14

2. Ventilator (V) 1.00 Sq. m. 2119.14

Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter-locked together through their entire length and jointed

together at the ends by end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood cover and spring

etc. complete.(A) Shutters having width Above 3.5 M 10.00 Sq. m. 4501.00

R & B SOR 24-25,I.co. 11005B, P.no.116)

Providing and laying wash down water closet (European type, W.C. pan)

18 with integral P or S trap including jointing the trap with soil pipe in cement

mortar 1:1 (1-cement, 1-fine sand) in white colour. 1.00 No. 1323.07

R & B SOR 24-25,I.no. 23.112, I.code23010, P.no.163)

Providing and fixing Urinal of approved quality including connection with

19 trap and with integral longitudinal flush pipe.(A) Squating plate pattern

white earthenware 2.00 No. 1582.09

R & B SOR 24-25,I.no. 23.112, I code 23034, P.no.166)

Providing and fixing washbasin with single hole for pillar tap with C.I. or

20 M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. 2.00 No. 1404.51

R & B SOR 24-25,I.no. 23.127, I code 23018, P.no.164)

Providing and laying glazed tiles 6mm thick in flooring on a bed of 12mm

21 thick cement mortar 1:3 (1-cement, 3-coarse sand) finishing with flush

pointing in white cement. 60.00 Sq. m. 929.88

R & B SOR 24-25,I.no. 14.29, I.code 14008AA, P.no.127)

Providing and fixing C.P. brass towel rail complete with C.P. brass bracket

and guard rail complete mixed to wooden plugs with C.P. brass scews. 1.00 NO. 610.32

R & B SOR 24-25,I.No. 23.144, I.code 23025, P.no.165)

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside dia. Low density, complete

23 with special flange compression type fittings, wall clipsetc. Including

making good the wall ceiling anf floor.

R & B SOR 24-25,I.No. 23.8, I code 23004F, P.no.193)

Providing and fixing S.W. gully trap with C.I. grating brick masonary

chamber and water tight C.I. cover with frame of 300mm X 300mm size (in

side) with standard weight. (i) square mouth traps. 100mm X 100mm size P

R & B SOR 24-25,I.No. 24.19, Icode 24006AA, P.no.171)

Providing and fixing C.P. brass waste for wash basin or sink. (32mm dia.)

R & B SOR 24-25, I.No. 23.135, I code 23020A, P.no.164)

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni

trap. 2.00 NO. 36.61

R & B SOR 24-25,I.No. 23.139, Icode 23022 P.no.165)

27 Providing and fixing toilet paper holder of C.P.Brass. 1.00 NO. 423.75

Providing and fixing screw down bib taps of brass screw down bib tap

polished bright (20mm dia.). 2.00 NO. 212.68

R & B SOR 24-25,I.No. 23.92, I. code 23028A2, P.no.165)

Providing and fixing pillar tap, capstan head, screw down high pressure with

screws, shanks and back nuts. (15mm dia) 1.00 NO. 305.67

R & B SOR 24-25,I.No. 23.95 , Icode 23029A, P.no.165)

30 Providing and fixing in position cowel went to pipes. 1.00 NO. 388.50

R & B SOR 24-25,I.code 23006B P.no.163)

Providing and fixing plastic seat and cover for wash down water closer with

C.P. brass hinges and rubber buffers. (Black plastic seat and cover.) 1.00 NO. 288.45

R & B SOR 24-25,I.No. 23.121, I code 23017,P.no.164)

Providing and fixing Gun metal check or non return fullway wheel valve.

R & B SOR 24-25,I.No. 23.99,I code23031D, P.no.166)

Providing and fixing chromium plated brass half turn flush cock of

approved quality including fixing in pipe line etc. complete. (25mm dia.) 2.00 NO. 261.16

R & B SOR 24-25,I.code 23032B P.no.166)

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm X 610mm

internal dimensions, total weight of cover with frame to be not less than

34 38Kg. (Wt. of cover 23Kg. and Wt. of frame 15Kg.) (R.C.C. top slab with

1:2:4 mix (1-cement, 2-Coarse sand, 4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. (450mm deep single pipeline) 1.00 NO. 2903.89

R & B SOR 24-25,I.No. 24.44, I.code 24016AA, P.no.174)

35 1000 lits. PVC Head tank 1000.00 Liters 3.18

R & B SOR 24-25,I.code M916 P.no.48)

36 Soak pit of required depth LS

Drilling of 165 mm dia. Bore hole in overburdern strata(alternate layers of

lime stone and yellow sticky clay formation) by DTH rig up to required

depth (approx. upto 100 m) including fixing of 165 mm dia. MS ERW /

37 UPVC pipes(Blank & slotted) & if further required drilling of 165 mm dia.

bore hole in any strata (trap etc.) strata by DTH driling method upto total

100 mm including measuring the yeild by Vnotch and flushing of bore etc.

complete in all areas.(For 100 Rmt) 1.00 NO. 77247.00

GWSSB SOR 21-22, Electro- mech (I.no. 2.1 P.no.1) + (I.no. 7 P.no.6) +

(Sec BI.no.1 P.no.17) + (Sec BI.no.2 P.no.17)

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Point wiring for Light/ Bell with 2-1.5 sq. mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1kV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in/ on surface on wall/ ceiling complete with 6A Modular type switch/ bell

38 push & accessories and earth continuity of following type, erected on PVC/

Metallic box, single mounting base frame covered with textured/ metallic

front plate modules erected on/ in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/ H.D.Connector as directed. with

medium class Rigid PVC pipe and accessories-cat.III

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ ceiling complete. 31.00 No. 363.00

R & B SOR 22-23,electrical I.no. 1-1-1 P.no.17)

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper

wires, in following type of to be erected concealed in/ on surface of wall/

ceiling complete with Modular type switch &3/ 5 pin Plug erected on PVC/

39 Metallic box covered with appropriate front plate modules erected on/ in

wall/ ceiling as per pipe erected with following type of accessories.For 6A

Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and

accessories.(2 nos. for pump floor and 2 nos. panel floor)

R & B SOR 21-22,electrical I.no. 1-1-2 P.no.17)

Providing and erecting mains with 1.1 KV grade FRLS pvc insulated ISI

marked stranded copper conductor wir ein following type of pipe to be

erected in / on wall / ceiling with 2.5 sq mm copper conducer FRLS PVC

insulated stranded wire of green colourr for earth continuity of foll. size.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ ceiling complete.

2 wire 4 Sq mm 200.00 Rmt 110.00

R & B SOR 21-22,electrical I.no. 1-4-2 P.no 35)

Providing and erecting approved make C.F.L out door type street ligth fitting

side entry with clear acrylic/plastic cover electronic ballast high circuit P.F.

41 weather proof design (Ip 65) THD less than 10% rust free fitting

componenets mounted in powder coating CRCA/Al. housing with lead wire

& with Non retrofit CFL tube complete

with TWO CFL tube 9 / 11 /18 watt Non retrifit with ballast & holder 9.00 NO. 560.00

R & B SOR 21-22,electrical I.no. 2-8-2 P.no 50)

Providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C system and having breaking capacity

KA to be erected in existing box. Confirming to IS 8826/1996 with ISI

mark.CAT III 3.00 NO. 115.00

R & B SOR 21-22,electrical I.no. 3-10-1(B) P.no

Providing and erecting 240 V MCB double pole switch for motor &

43 inductive load (C curve) having 10 KA breaking capacity & confirms too

IS:8828 in existing box having following capacity

R & B SOR 21-22,electrical I.no. 3-10-2 P.no

Providing and erecting approved make ceiling fan with double ball bearing

44 ISI mark with condenser .c. 230 v.50 C/S 1200 mm sweep complete, conopy

erected on existing hook or clamp with earthing. 7.00 NO. 1700.00

R & B SOR 23-24,electrical I.no. 5-1-1 P.no

Providing and erecting single phase approved makeindustrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and max. speed in RPM. 2.00 NO. 2400.00

305 mm dia 900 RPM

R & B SOR 23-24,electrical I.no. 5-3-4 P.no

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet 20.00 Sq. m. 726.92

Structural steel work ( Confirming to IS 4923- 1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

47 hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

in charge. 500.00 Kg. 129.85

48 M. S. Specials flanged ends

Above 300 mm. dia 500.00 Kg. 98.00

SOR year :- 2022-23

Item Code :- 7.1.B

Providing and Fixing office Furnitue with 2 Tables with revolving office

Chairs and 5 Chairs, Computer System i5 Generation 1 TB SSD ot latest

49 with Printer all in one with A3 Size Scanner, 2 Nos office cubboard ,3 Nos

Padestaral Fans, 2 Nos alluminium laddder 6.m M long as per instruction of

Providing and fixing cupboard made of flat pressed three-layer particle

board or graded plain wood board, medium density, exterior grade (Grade I)

FPT-I, 12 mm thick, conforming to IS:3087 and fixed to frame, backing, or

studding with screws and suitable fixing arrangements. The cupboard shall

be fabricated at site or factory-finished, as per approved drawing and

direction of Engineer-in-charge. 1.00 L.s 200000.00

Construction of Shed 15 M X 8 M with RCC floor as per approved drawing

and direction of Engineer-in-charge. 1.00 No. 1370780.00

CCTV SYSTEM 10 Nos

Supply, installation, testing and commissioning of 4 MP IP Bullet Camera,

1/3" Progressive scan CMOS,Max Resolution 2688X1520,Min Illumination

color: 0.005 lux (F1.6, AGC ON), 0.03 lux with IR, Fixef focal lens, 2.8 and

52.1 4 MM Optional,IR Range up to 30 Mtr, Efficient H265+ compression

technology saves bandwidth and storage, water and dust resistant (IP67)

Make: Panasonic / CP Plus / Matrix / Axis

Supply, installation, testing and commissioning ofUp to 8 channel IP camera 2 Nos

input,Instastream/H.265/Smart H.264+/H.264,Up to 8MP resolution

preview and playback, Max 200Mbps Incoming Bandwidth,Support

SATA HDDs up to 10TB Each, 2 USB(1 USB3.0), HDMI / VGA

52.2 simultaneous video output,Support Multi-brand network cameras,ONVIF

Version 2.4 conformance,Mobile Software: iCMOB, gCMOB,CMS

Software: KVMS Pro.

Make: Panasonic / CP Plus / Matrix / Axis

Supply, installation, testing and commissioning of 8 x 10/100/1000 Mbps 2 Nos

Ethernet ports unmanaged switch + 2 SFP, Full/half-duplex for Ethernet/Fast

Ethernet/Gigabit, 2 GE Uplink, 120W PoE power budget and up to 30 W

52.3 per port for simultaneously powering multiple PoE-compatible devices.

Make: HP / D-link / Cisco

Supply, installation, testing and commissioning of 4 port 10/100/1000 Mbps 2 Nos

gigabit ethernet ports 1 10/100/1000 Mbps & 1 SFP uplink port 60watts

available PoE Flow control for protection against data loss Maximum

52.4 distance of 250m Light protection 6KV Operating Temperature: 0 to 40 deg

C (32 to 104 deg F)

Make: HP / D-link / Cisco

Sr.No. Description of Items Qty. Unit Rate Amount in Rs.

Supply, installation, testing and commissioning of 6 TB HDD 2 Nos

Make : WD/ Segate

Supply installation, testing and commissioning of 9U Indoor Rack with 2 Nos

52.6 required accessories.

Make: Rittal / Elixir / Valrack

Supply installation, testing and commissioning of Outdoor Junction Box. 2 Nos

Supply installation, testing and commissioning of Media Converter with 4 Nos

52.8 required accessories.

Make: Rittal / Elixir / Valrack

Supply installation, testing and commissioning of LC-LC SM Fiber Patch 4 Nos

52.9 Cord - 3 Mtr with all Required Accessories.

Make : Molex/ Commscope / D-Link

Supply installation, testing and commissioning of CAT6 Patch cord 3 Mtr 6 Nos

52.10 with all Required Accessories.

Make : Molex/ Commscope / D-Link

Supply and Laying of CAT6 SFTP 23AWG Cable. 800 Mtr

Make : Molex/ Commscope / D-Link

Supply and laying of 6 Core Outdoor SM Fiber Optic Cable 1000 Mtr

Make : Molex/ Commscope / D-Link

SITC of 55 Inch Full HD Display with all Required Accessories. 2 Nos

Make : Samsung/ Panasonic.

52.14 SITC of 10 Mtr HDMI Cable 2 Nos 1,701.00

SITC of 4G Router with all Required Accessories to connect With LAN 2 Nos.

Make: D-link/ Netgear/ Cisco

Net Total With GST

Add 2 % TPI & PMC Charges

I/We am/are willing to carry out the work at… ..................... % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words