Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.1 LAccepted-AOC | 1 | Accepted-AOC accept | |
| 2 | 2₹29.7 L+₹4.6 L (18.3%)Rejected-AOC | 2 | Rejected-AOC reject | |
| 3 | 3₹30.0 L+₹4.9 L (19.4%)Rejected-AOC | 3 | Rejected-AOC reject | |
| 4 | 4₹31.5 L+₹6.4 L (25.5%)Rejected-AOC 1ST FLOOR SIDHARTH TOWER BALTI KHARKHANA BYELNE S J ROAD ATHGAON GUWAHATI KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | 4 | Rejected-AOC reject |
Tender Value
₹30 L
EMD Value
₹30,000
Closing Date
6 Apr 2024, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EWC
Opposite Circuit House, Katju Marg, Bareilly
Construction of 33 KV lines at various SubStations under EUDC Bareilly
2024_MVVNL_919938_1
90/EWC(B)/2023-24
Open Tender
Electrical Works
Item Rate
30 days
BAREILLY
AS PER TENDER DOCUMENTS
3 documents required · 3 mandatory
₹3,540
SE EWC
₹30,000
24 Aug 2024
22 Mar 2024
6 Apr 2024
22 Mar 2024
6 Apr 2024
22 Mar 2024
Amount
Part-(A) CONSTRUCTION OF 33 KV LINK LINE OF LENGTH 0.9 KM FROM 33/11 KV S/S C.B. GANJ TO 33/11 KV S/S LOHIYA VIHAR
Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.
33 KV Line Isolator
33 KV VCB 800A 750 MVA
33 KV control panel for single feeder
MS Channel 125x65mm
MS Angle 75x75x8mm
MS Angles 50x50x6mm
33 KV 3X300mm2 XLPE Cable
33 KV 3X300mm2 XLPE Cable jointing kit O/D
33 KV 3X300mm2 XLPE Cable jointing kit S/through
ST pole 09 Mtr. Long
33 KV pin insulator
33 KV pin with nut
M.S. Earthing rod
M.S angle 65x65x6mm, 2700mm
Top channel 125x65x6mm 3200mm
T- Off Channel 125x65x1300mm
ACSR Dog conductor
Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.
Double pole cable exposer of ST pole
Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.
Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.
Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.
Double pole cable exposer of ST pole
Fixing of danger board and number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.
Cable laying by drill method single circuit in HDPE Pipe.
Cable laying by drill method single circuit.
Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)
Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.
Fixing of 33 KV O/D or I/D Cable Jointing Kit
Fixing of 33 KV S/Th Cable Jointing Kit
Fixing of cable route marker.
Fabrication, erection and grouting of following equipment structures as per RESSPO/ Approved Drawing and its, plinth 45cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt).
33 KV Line Isolator structure
33 KV CT Structure
33 KV VCB Structure
Mounting and installation, including Mechnical & electrical fixing and adjusting of following equipment on their respective structures including proper adjustment
33 KV Line Isolator
33 KV VCB
Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor).
Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.)
Complete laying and termination of copper control cable from both (old and new 5 MVA TF) 5 MVA power T/F and 33 KV VCB in the out door switch yard to Transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings.
Control Cable 4x2.5 mm2
Control Cable 2x2.5 mm2
Erection & testing of 1 No. single feeder penel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete connection with new, 33 KV VCB, CT etc, with filling of control room's tranches by river sand.
Part-(B) REPLACEMENT OF DAMAGE 770 MTR. 33 KV CABLE OF SUNCITY LINE AT DIFFERENT PLACES (NH CROSSING, RAILWAY CROSSING, DOHNA YARD AND NEAR DHABA)
Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.
33 KV 3X300mm2 XLPE Cable
33 KV 3X300mm2 XLPE Cable jointing kit O/D
Cable laying by drill method single circuit in HDPE Pipe.
Cable laying by drill method single circuit.
Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)
Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.
Fixing of 33 KV O/D or I/D Cable Jointing Kit
Part-(C) WORK SPECIFICATION FOR 750 M. 33 KV CABLE LAYING FOR DAMAGE CABLE OF 33KV LINE JAGATPUR AT PLACE BIABAAN KOTHI AND SATELITE
Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.
33 KV 3X300mm2 XLPE Cable
33 KV 3X300mm2 XLPE Cable jointing kit O/D
33 KV 3X300mm2 XLPE Cable jointing kit S/through
ST pole 11 Mtr. Long
33 KV pin insulator
33 KV pin with nut
M.S. Earthing rod
M.S angle 65x65x6mm, 2700mm
Top channel 125x65x6mm 3200mm
T- Off Channel 125x65x1300mm
ACSR Dog conductor
Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.
Double pole cable exposer of ST pole
Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.
Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.
Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.
Double pole cable exposer of ST pole
Fixing of danger board and number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.
Cable laying by drill method single circuit.
Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)
Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.
Fixing of 33 KV O/D or S/Th Cable Jointing Kit
Part-(D) WORK SPECIFICATION FOR 150 M. 33 KV CABLE LAYING FOR DAMAGE CABLE OF 33KV LINE HARUNAGLA AT PLACE NH CROSSING
Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.
33 KV 3X300mm2 XLPE Cable
33 KV 3X300mm2 XLPE Cable jointing kit O/D
Cable laying by drill method single circuit in HDPE Pipe.
Cable laying by drill method single circuit.
Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.
Fixing of 33 KV O/D or I/D Cable Jointing Kit
M/S SUPER ENGINEERING TRADERS
M/S TIWARI TRADING COMPANY
Bharat Trading Corporation
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .