Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.3 LAccepted-AOC | L-1 | Accepted-AOC L1 | |
| 2 | L-2₹11.5 L+₹1.1 L (10.8%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹11.6 L+₹1.2 L (11.1%)Rejected-Finance | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹12.2 L+₹1.8 L (17.1%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹12.7 L+₹2.3 L (22.4%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L-5 | Rejected-Finance L-5 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
11 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE Samba PIN-184121
Addition alteration in Bldg No. T 46 and T 49 T 48 T 50 P 7 P 16 P 29 AND P 52 MD ACCN UNDER AOR OF GE SAMBA
2024_MES_649988_1
GE/SMB/T-01/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE SAMBA
Class E Category a i
8 documents required · 8 mandatory
₹500
GE SAMBA
₹30,000
Yes
5 Jul 2024
12 Apr 2024
18 May 2024
12 Apr 2024
11 May 2024
27 Apr 2024
Amount
Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc, complete all as specified and directed .
M & L for Brick work with flyash bricks, old size , straight or curved on plan exc. 6 m mean radius bult in CM 1:6 ,complete all as specified and as directed.
S/F Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections, complete all as specified.
S & F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair minimum weight 20 mm size-210 gms),complete all as specified and as directed.
M & L for Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed.
M & L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:6, Complete all as specied and directed.
M & L for Glazed coloured ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x300x7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .
M & L for Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and filling back of chowkhats with PCC, 1:2:4, type B-0, complete all as specified and directed .
S & F 35mm thick 2nd Class hard wood glazed,factory made gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing No CEPZ/TD-378/11 Sheet No 1/1 including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.
S & F Factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with partical board core with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & back face to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification and drawings.
S & F Stainless steel wire grade SS-304 cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S & F Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixed complete all as specified.
S & F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm size, complete all as specified and directed.
S & F 4mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and directed.
S & F in repairs, 15mm bore CP Bib taps, long shank, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed.
S & F in repairs, Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified and directed.
S & F in repairs, 20mm bore stop ball valves , cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for pipe or for unions and fixed in repair,complete all as specified and as directed.
S & F in repairs, Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.
S & F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed
S & F PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs complete all as specified and directed.
S & F PVC(SWR) , bends for 75 mm bore any radius, complete all as specified and as directed .
M & L for Plain cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate as in foundation, sub base of floors , complete all as specified and directed.
S & F in repairs, 20mm outer dia stainless steel decorative drapery curtain rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 20mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point,complete all as specified and directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete as specified and as directed by the Engineer-in-Charge.
Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for foundation and getting out in any type of soil complete all as specified and directed .
M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, confirming to FE-500 / FE 500 D, complete all as specified and directed.
S & F Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and directed
S & F G.I tubing 15 mm bore tubing medium grade galvanised with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc fixed to wall, ceiling or laid in floors complete all as specified and directed
S & F G.I. tubing 20 mm bore tubing medium grade galvanised with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc fixed to wall, ceiling or laid in floors complete all as specified and directed
S & F,Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed .
S & F Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including filling back of chowkhat with PCC 1:2:4 type B-0 a including butt hinges 100 mm long hinges complete all as specified and as directed.
M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick CM 1:4 complete all as specified and directed.
S & F Double shutter Box type steel windows comprising of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed including 10mm square bars as in grill complete all as specified and as per drawings no. CEPZ/TD-27/13 sheet 1/4 to 4/4. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
M & L Light shade vitrified tiles double charged (1st quality) 10 mm thick(square/rectangular joint free) , polished area of each tiles n. exc 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in cm 1:6, complete all as specified and directed
M & L for RCC M-25, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specified and as directed.
M & L for Aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed.
M & L for Rendering 15 mm thick cement plaster in cement mortar 1:4 in on fair faces of brick /stone/concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
S & F in repairs PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed .
M & L for Cutting into existing manholes for connecting new drains, making good to pipe ( Internal dia 150 to 200mm ) and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.
Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc15cm thickness (Below or above ground level), complete all as specified and directed.
M & L for Non-skid ceramic coloured tiles 8 to 10 mm thick(square/rectangular joint free) ,area of each tile exc. 0.18 sqm but n.exc. 0.38 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layers of mortar 15 mm thick in CM 1:6, complete all as specified and directed
Ditto All as per Srl Itme No 45 but as in skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and directed
S & F, Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass, fixed in repairs complete all as specified and directed.
S & F in repairs, 15mm bore CP Pillar taps (fancy types), cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified and directed.
S & F in repairs, 15mm bore C.P. angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe,complete all as specified and directed.
S & F, PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore , complete all as specefied and directed.
Taking down shutters (without taking off shutters from frames) area exc 1.00 sqm but not exceeding 2 square metre each and refixing in the same opening, complete all as specefied and directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
BALI ENTERPRISES
SIDDAHANT ENTERPRISES
M/S RAMESHWAR ENGINEERS & BUILDERS
M/s Sahib and Company
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .