PROVN OF PARKING SHED FOR SINGLE JCOS ACCN AND CONNECTING PASSAGE AT BUILDING NO P 104 OF 4 CORPS INCLUDING SPECIAL REPAIR TO QTR NO P 23 1 AND P 23 3 AT LAXMAN MARG AND PROVN OF 10 X 2 TON ACS FOR COMN COMPLEX IN TEZPUR MIL STN UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts.Complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkat complete all as per manufacturer instruction.Complete all as specified and as directed.

Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).Complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, S & Fing in opening as per specification. Complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,S & Fing at site as per specifications.Complete all as specified and as directed.

S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,4mm plain glass and stainless steel wirmesh 0.36mm nominal dia of wire and average width of aperture 1.40mm etc.Complete all as specified and as directed.

S&F 100mm size stainless steel Butt hinges complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.Complete all as specified and as directed.

S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws.Complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.Complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire staples.Complete all as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.Complete all as specified and as directed.

S& F 4.0 mm thick sheet glass is ground or obscured or frosted, on one side quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.Complete all as specified and as directed.

S&F in repair of pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work thickness of 12 mm complete all as specified and directed.

S&F in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

M&L 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified.

S & F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

M&L for 40 mm thick PCC 1:2:4 type B0 using (12.5 mm graded aggregate) as in flooring and path including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed.

Demolition of reinforced cement conc of any description and in any position.Complete all as specified and as directed.

M&L for RCC M-25 design mix (using 20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete.Complete all as specified and as directed.

M&L for RCC M-25 design mix (using 20 mm graded aggregate) as in coloumn, pillar, pier, posts plinth beam or lintal bands etc.Complete all as specified and as directed.

M&L for RCC M-25 design mix (using 20 mm graded aggregate) as slab supported on wall , beams columns in floor, roofs landing and the like.Complete all as specified and as directed.

Use & waste form work for flat fair finished surfaces of concrete foundation, footings, bases of columns and plinth/lintal beam and similar work.Complete all as specified and as directed.

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions.Complete all as specified and as directed.

Use & Waste of Fromwork to sides and soffits of floor or roof beam , beam haunching, girders , shevles & cooking plat form includIng support and hangs.Complete all as specified and as directed.

TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.Complete all as specified and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.Complete all as specified and as directed.

S & F louvers /Precast RCC Jalli, 35mm thick (measured solid) including all moulding in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:1and shall be jointed flush complete all as specified

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy joints filler to match over 15mm tick screed bed in cement mortar (1:6) complete all as specified and as directed

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

All as per item No 37 above but except brick.

Taking down cement plaster, of any description on brick or stone walls, celings etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M & L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and smooth without using extra cement.Complete all as specified and as directed.

M & L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and smooth without using extra cement.Complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished even and smooth without using extra cement.Complete all as specified and as directed.

M&L for liquid integral water proofing compound.Complete all as specified and as directed.

M & L for applying three coats of white wash on walls including preparation of new or previously untreated surfaces all as specified and directed.

M&L for Complete removal of existing treatment surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L Applying two coats of acrylic distemper to newly plastered/previously untreated wall surface over a coat of 1 mm thick layer of wall care putty over a coat of primer by smart painting method including preparation of newly platsered wall surface all as specefied and directed.

M&L Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm thick layer of wall care putty over a coat of primer by smart painting method including complete removal of existing treatment all as specefied and directed..

M&L Applying one coat of acrylic distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall all as specified and directed

M&L Applying two coats of acrylic distemper by smart painting method to old plastered wall including complete removal of existing treatment all as specefied and directed..

M&L preparation of newely plaseter sufaces and appplying two coats of Acrylic exterior paint (Anti fungal) over a coat of 1 mm thick layer of wall care putty and a coat of wall primer by smart painting method to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L complete removal of existing treatment and appplying one coat of exterior emulsion weather coat by smart painting method to old plastered surface of walls as per manufacturer instrcution including properly fillings the cracks complete all as specified and directed.

M & L for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M & L for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) of any shade, polished, area of each tiles exc 0.18 and not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy joints filler to match over 15 mm thick screed bed in CM 1:6.complete all as specified and directed.

All as per item No 57 above but in skirting over 10mm thick screeding in cement mortar 1:4. complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy joints filler to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed.

S&F Coloured Glazed ceramic tiles 450x300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in epoxy joints filler to match over 10mm screeding in Cement mortar 1:4. complete all as specified and directed.

M/L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with epoxy joints filler with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:4 over cooking platform.complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with epoxy joints filler with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick rendering in CM 1:4.complete all as specified and directed.

M&L for Vitrified parking tiles of any colour/patern 40cm x 40 cm x 9 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes.complete all as specified and directed.

Fixing only Machine pressed precast concrete interlocking paver block (Glazed finish of any colour/patern )with Grey cement and pigment top surfaces treated by antifungal paint any shape any size of 60/80 mm thickness, M-30 Grade complete all as spedified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size andpattern, finishing and sweeping extra sand.complete all as specified and directed.

Taking down existing damaged water closet alongwith complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk in single peice cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Unplasticised PVC 15 mm pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including taking down etc.complete ,all as specified and directed.

M&L Unplasticised PVC 20 mm pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including taking down etc.complete,all as specified and directed.

Supply only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

S & F,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S & F in repairs wall mixer CP 15 mm bore (3 in 1) including provision for overhead shower complete with 15 mm long bend pipe and wall flenge complete all as specified and directed

S & F, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

S&F in repairs stop cock/ Angle cock cast copper alloy, fany type ,chromium plated, screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 15mm, all as specified and directed.

S & F,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

S & F,as in repair, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including 610 mm long waste pipe etc complete all as specified and directed.

M & L, as in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

S&F in repairs stainless steel decorative curtain rod two Nos of brackets and end knobs fancy type complete all as specified and directed.

S & F, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard and railing 60cm long all as specified and directed.

S & F, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

S & F, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

S & F, as in repair, vitreous china wash basin, white, flat back size 550x400mm mm, Pedestal type ,excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S & F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or highdensity or PVC 32 mm dia complete all as specified and directed.

S & F, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F stainless steel handles , cast type,polished bright fancy type,handles fixed with screw,of 125mm size all as specified.

S & F as in repair CP shower rose with revolving joints and fixed to GI pipe or unoin all as directed.

S & F in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed

S&F 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete.

S&F in repair brass chromium plated towel rail 600 mm long complete all as specified and directed.

S&F in repair brass chromium plated soap dish complete all as specified and directed.

S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed.

S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge.

S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black all as specified.

S&F SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified.

S&F OrgaTray 570 - 500mm Depth, 900mm Width for 94 mm drawer side profile height set includes variable dividers for organising drawer in any way plastic silver, dividing elements, anthracite fixed in kitchen cabinet complete all as specified.

S&F CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.

S&F CargoTech M Stainless Steel Wire Basket (Plain) size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.

S&F Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified.

S & F in repair 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.

All as per item No 101 here-in-before but 75 mm bore.

S & F, PVC (SWR) bends (any radius) for 110 mm bore PVC pipes all as specified and directed.

All as per item No 103 here in before but 75 mm bore.

S & F, PVC cowls 110 mm bore all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed

Excavating in post holes(or similar holes) each 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good.complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil complete all as specified and as directed.

Removing excavated materials n.exc 150 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface all as specified and as directed.

M&L for Sand Filling under floors/cushion or in foundations including watering and consolidation as specified and directed by Engr -in-Chrage.

M&L for PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete all as specified.

M & L for 100mm thick PCC 1:4:8 ( 40 m graded stone aggregate) as sub base Path/paving even and rough to recieve the topping layer all as specified and directed

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in DPC/ coping, leveling course or similar work.complete all as specified and as directed

M&L Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat as directed.

Supply & Fix framed works such as gates, grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F steel work in tubular truss including Post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, roller conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

S&F rolled sections as in main cress beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or connecting plates cofirming to Fe-410-w (Gde-E250) quality-A.complete all as specified and as directed

M & L Mild steel plates, plain or chequered , 5mm thick or over FE -290 (Gde E-165) all as specfied and directed

S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour, tensile strength of 550 Mpa as in roof covering shed including shell type etc fixed with self tapping screws as specified.

All as per item No 121 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws as specified.

Supply, installation, testing and commissioning of Wall mounted split type Air conditioner electric driven 240 volt grade,50 Hzs single phase BEE 3/5 star rated with ISEER > 3.5, with variable speed compressor, energy saving 2 Ton capacity cordless remote controll unit with built anti Virus Protection, and Dual invertor tecnology, convertable 6-in-1 for better indor air quality complete with all fixing factory made steel stand set for mounting to out door unit nut ,bolt , washer etc and insulating materiels ,making all electric connection as specified and directed by Engr-in-charge. Note: Quoted rate shall be included the rate of copper tube upto required length and factory made out door unit mounting bracket with fixing nut, bolt and other at site. Make : LG Cat No- ENXE or equivalent make of Blue star//Daikin/Hitachi

Supply and fixing and connecting of fully automatic single phase naturally air cooled indoor type wall mounting type digital voltage stabilizer voltage variation between 130 to 300 volts with output voltage stabilizer at 230 v with accuracy of +/- 2.5% of capacity 5KVA (suitable up to 2 Ton or 24000 Btu/Hr) W TDR all as specified and directed Make : V-Guard model VD 500 or equivelent make of Mocrotek/Volina/AE

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down main switches and DBs of any type and make including wooden board / junction box.complete all as specified and as directed

M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

All as per item No. 127 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable.

All as per item No. 127 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable

All as per item No. 127 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable

All as per item No. 127 here - in - before but for 5 Amps socket point on the same board controlled by one switch.

Ditto as per Item No 127 above but for one light point controlled by two two way switches

S&F modular switch flush type, 6 Amp, one way ,1 module all as directed specified.

S&F modular switch flush type, 6 Amp, two way ,1 module all as directed specified.

S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified.

S&F modular switch, 16 Amp flush type 1 module all as directed/ specified.

S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.

S&F in modular bell push, flush type, 5 Amp,1 module all as directed/ specified.

S&F modular Fan Regulator stepped type 2 module ,120W all as directed/ specified.

S&F call bell Dingdong type AC 230 Volts single pole.

S&F ceiling rose surface backelite three terminals.

Supply and fix LED tube light fitting of 20 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 20 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. Make :Crompton/Havells/Bajaj/CG/Phillips/Surya/Jaquar

All as item no 142 above but LED batten 9 watt 2 ft long

S & F Lamp holder insulated body PVC/polycarbonate with back plate and 7 W LED bulb suitable for batten fitting complete all as specified and directed

S&F Decorative wall light fixture made out of polycarbonate, suitable with 5 watt LED Bulb complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed

Supply and fixing epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed

Supply and fixing MCB 240 Volts C Curve SPN 6-32 Amps 10 KA.complete all as specified and as directed

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts complete all as specified and directed.

S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified.

M&L in repair for sub main wiring with Four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

dito as item No-153 but 2 x 4 sqmm + 1 x 4 sqmm earth wire

M&L point wiring for one light point point with 1.5Sqmm (Nominal Area) PVC insulated unsheathed cable FRLS grade with copper conductors, single core, multi stranded 1100 volts,ISI marked (IS 694) (For phase, neutral) drawn through PVCcasing caping including provision of 1.5sqmm FRLS multi stranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth complete all as specified. Note:- All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) as directed by the Engineer-in-Charge.

Supply and fixing switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

Supply and fixing Building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete with suitable GI pipe of dia 40 mm with clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and directed

Supply and fix House service bracket with 3.0 metre long GI pipe 40 mm medium grade with two nos 60 degree band.Complete all as specified and directed.

Supply and fix,as in repair, 15 mm bore two way bib taps/ angle cock, cast copper alloy,cromium plated, fancy type, with quarter turn handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, 150mm bore PVC (SWR) rain gutter including all fittings and adjustable brackets complete in all respect as specified and directed by Engr-in-Charge.

Supply and fixing of 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of 2.0 corex 10.0 sqmm,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 10 sqmm complete all as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M.P.SUPPLY

SHANKAR ENTERPRISE

Chinmay Traders