REPAIR TO ROOFS, FLOORING, PLINTH PROTECTION, JOINERY, PLUMBING, PLASTERING, TILING, WATER TANK CLEANING ETC AND CONNECTING ITEMS TO MD AND OTM ACCN OF BDE, SIGNAL COY, FD WKSP, 5 NAVAL DTE AT BARRACKPORE CANTT UNDER GE BARRACKPORE

Amount

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheet with side lap, fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers etc.complete all as specified and as directed.

Refixing only asbestos cement corrugated or semi corrugated sheet as obtained from dismantling of old sheets with side lap, fixed with 'L' or 'J' type or cranked hook bolts, nuts and washers complete all as specified and as directed.

S&F 6 mm thick asbestos cement two piece adjustable serrated ridge, corrugated or semi corrugated sheet fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.

Refixing only old serviceable Prelaminated particle board 18mm/19mm thick as obtained from dismantling old boarding, fixed with screws to timber frame work complete all as specified and as directed.

S & F 4mm thick Non asbestos fibre cement building boards with Anodised aluminium snap grid frame work for false ceiling, flat or sloping fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

All as per item No 10 here in before but except non asbestos building boards complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame work as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M & L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

M&L for preparation of newly ceiling surfaces and applying a coat of 3mm average thick wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all as specified and as directed.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for PCC 1:3:6 Type C-2 ( Using 40mm graded crushed stone aggregate) as in foundation , filling, and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in floor, finished the surface even and smooth with using extra cement complete all as specified and as directed.

M & L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.

M & L for 3mm thick glass dividing strip 38 mm wide inserted in position as in floor complete all as specified and as directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar susptnded work complete all as specified and as directed.

M&L for Screed bed or bedding layer 20mm thick in cement mortar 1:3 for laying of APP membrane over roof mix with water proofing compound @ 3% by weight of cement or as per manufacturer’s instructions complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for 3mm thick APP modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the bitumen primer coat @ 0.40 litre/Sqm by the same membrane manufacturer of density at 25 degree C, 0.87 to 0.89 Kg/litre and viscosity 70-160 cps shall be applied on the prepared surface. Membrane shall be laid using butane torch and sealing all joints etc as per para 11.44.5 of SSR pt-I laid on primed surface with side over lap of 80 mm and end overlap of 100 mm and ensuring complete thermo fusing and applying one coat of aluminum Paint over it complete all as specified and as directed .

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered or old decorated wall surface and applying 2mm thick (Average) wall care putty complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 3 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all specified and as directed

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying Two or more coats of 100% Premium exterior acrylic emulsion paint of required shade, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

S&F for Virified Ceramic light shade coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

S&F for Virified Ceramic light shade coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M & L for coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc. over and including 15 mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M & L for coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc. over and including 15 mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, complete all as specified and as directed.

M&L for glazed light coloured/printed ceramic tiles 350x250x7mm/450x350x7mm/300x200mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut Kota stone slab 20-25 mm thick in verticle surface such as riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10 mm thick rendering in CM (1:3) including rubbing and polishing complete all as specified and as directed.

S&F for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed in cement mortar (1:3) including rubbing and polishing complete all as specified and as directed.

M & L for green marble work 18mm to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 10 mm thick rendering in cement mortar (1:3) including rubbing and polishing complete all as specified and as directed.

Dismantling timber scantling 40Sqcm and over in section as in framed work in any position complete all as specified and as directed.

M&L for 2nd class hard wood, in scantlings, clean sawn wrought timber as in framed work complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm n exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

S & F factory made solid PVC door frame of size 40mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Factory made fully glazed (frosted/ground/obscured)/fully gauged PVC window/ventilator shutter 30mm thick(Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail(rate including glass panes/gauges) complete all as specified and as directed.

M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for mild steel flat iron in bands, straps, supports or stays for pintle hinge, hand made sliding bolts, hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain framed paneled shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board exterior grade medium density fitted to chowkats or frames complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F 75 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F 50 mm size stainless steel butt hinges, complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S & F in repair, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed.

S & F in repairs, aluminium door closer (Diecast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S & F in repairs, 20mm dia anodised aluminium tubular curtain rod including brackets,stops, rollers complete all as specified and as directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.

S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S & F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repairs, stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm thick figured glass, pinhead type in squares n exc 0.5 sq. m each pane complete all as specified and as directed.

S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 12mm thick toughened glass door fixed with steel connectors, top and bottom pivots, 02 nos 450mm long stainless steel handles, stainless steel hinges as required including locking arrangements including dismantling of old door complete all as specified and as directed.

M&L for prelaminated particle board 9mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and as directed.

S & F HDHMR Board 18/19mm thick, both side laminated any colour, as in shutter, vertical support and horizontal shelfs with necessary fitting including dismantling of old board of any description complete all as specified and as directed.

S&F Continous piano type hinges mild steel bright finish or electro galvanised , size of flaps (when open) 30 mm complete all as specified and as directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n.exc 500 litre capacity, etc complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n.exc 1000 litre capacity, etc complete all as specified and as directed.

Taking up or down 15 mm bore GI water tubing and connections including cleaning for re-fixing to store complete all as specified and as directed.

S & F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI water tubing and connections including cleaning for re-fixing to store complete all as specified and as directed.

S & F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 20 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore, PTMT bib taps, standard, any colour, high pressure, screwed down for iron pipe and fixed (minimum weight 90 gram) complete all as specified and as directed.

S&F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe.

S&F in repairs, tubular towel Rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

S & F in repairs, glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed

S & F in repairs, chromium plated health faucet with 15 mm bore 1metre long tube acrylic type complete all as specified and as directed.

S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 914 mm x 460 mm x 203mmbowl size 405 mm x 354 mm x 203 mm complete all as specified and as directed.

S & F in repairs, vitreous china, wash hand basin, white, flat back size 580 mm x 450 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia 450mm long PVC connection pipe complete all as specified and as directed

S & F PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.

S & F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 450mm long etc complete all as specified and as directed.

S&F in repairs, vitreous China bowl, urinal flat back or corner wall type, size of 465X 355 X 265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc. complete all as specified and directed.

S & F in repairs, 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed. Note : Excavtion & Earth work is deemed to be include in quoted rate.

S & F in repairs, 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed. Note : Excavtion & Earth work is deemed to be include in quoted rate.

S&F 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed

S&F 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

S&F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

SWWAPAN BUILDERS (BID ID -3436001)

M/S H.P Singha (BID ID -3435000)

ABHISHEK CONSTRUCTION CO (BID ID -3435874)

SENCO (BID ID -3435003)

Kiran Traders (BID ID -3434314)

N S CONSTRUCTION (BID ID -3434985)

BEE ROMEN (BID ID -3440152)