CA NO GE/HAL-46/2021-22

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of any description, not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of any description of exc 1.5 sqm but n.exc 4 sqm complete all as specified and directed. Note for item No 1 & 2 : The quoted rates shall include for cutting of hold fast blocks for taking down frames and nothing extra shall be admissible on this account.

Taking down of shutter of any description exc 1 sqm but n. exc 2 Sqm each complete all as specified and directed. .

Taking down of shutter of any description not exc 1 sqm each complete all as specified and directed. .

Taking down of shutter of any description but exc 2 sqm each complete all as specified and directed. .

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling hollow portion of frame with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling hollow portion of frame with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

S&F 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commerical ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick glazed or skelton shutters, open rebated prepare to receive glass guauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut or metered beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat, moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for Top rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in frame complete all as specfied and directed.

S&F Powder coated aluminium frame for doors, windows, ventilators/partition with one or more rebates including joining cleat for fixing etc complete all as specified (minimum thickness of powder coating 50 micron)

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 nos in each door, tower bolt, hinges, anodised aluminium snap beading screws complete all as specified (minimum thickness of powder coating 50 micron).

S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, ruber neoprene packing,anodised aluminium snap beading screws anodised aluminium fittings such as peg stay. Tower bolt 150mm long 1 No, hinge type B-21 100mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

S&F anodised aluminium grill (powder coated) with minimum anodic coating of grade AC15 of approved design/pattern, with approved standard section and fixed to the window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised section around the opening, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, zing clips, ruber neoprene packing,anodised aluminium snap beading screws anodised aluminium fittings such as peg stay. Tower bolt 150mm long 1 No, hinge type B-21 100mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

S&F Prelaminated particle board 9mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed in aluminium door shutter/Aluminium partition.

S & F steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07.

S & F 150mm size aluminium anodised, barrel tower bolt of extruded section and fixed.

S & F 200mm size aluminium anodised, barrel tower bolt of extruded section and fixed.

S & F 150mm size extruded section aluminium alloy handles, fabricated type anodised.

S & F 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed .

S & F in repair 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S & F mild steel butt hinges cold rolled medium weight of 100mm long

S&F 300mm long ordinary rat tail rod pattern spring (mild steel) including roller and roller plate comlete

S&F Door closer Cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

All as per SI item No.28above but fixed in repairs.

S & F Brass Mortice lock vertical type 75mm 4 Levers

S&F in repair 40mm waste fittings, brass chromium plated for sink, basins and urinals etc with long screwed shanks and fly-nut flange end bedded in red lead cement and other end fixed complete all as specified and directed

Hacking out old broken glass panes of any thickness description from wooden or metal frame , glazed with putty or fixed with beads & having area not exc 0.50 sqm in each pane complete all as specified.

S & F 3 mm thick sheet glass ordinary quality and fixing in frame with glass putty or fixed with wooden beads having area not exc 0.50 sqm in each pane complete all as specified

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S &F in repairs MS coloured hollow curtain rod 19/20 mm dia with two Nos decorative type brackets knobs for each rod of length not exceeding 1.80 mtr including fixing with suitable arrangements complete all as specified and directed.

S & F in repair double wall layer rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 750 ltrs complete all as spcified as as directed.

S & F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F in repair wash down water closet (Pedestal pattern) including seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified.

S&F in repair vitreous china urinal flat back, size 465mm x 355mmx 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back including waste coupling and discharge pipe complete all as specified

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flishing cistern and flush pipe complete incl. provn of cement concrete bedding complete all as specified and directed.

S & F in repair vitreous china wash hand basin white flat back size 550mmx400m excluding , waste chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand , fancy type pillar taps cast copper alloy chromium plated of 15mm bore, wate coupling and waste pipe complete all as specified.

S & F in repairs 15mm bore fancy type pillar tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and as directed.

S & F in repairs 15mm bore pipe fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore complete all as specified and as directed

S & F in repairs 15mm bore pipe fancy type bib tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connection including cleaning for re fixing or removal to store complete.

All as per item No. 47 above but 20mm bore

M & L for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors complete all as specified.

All as per item No. 49 but 20mm bore

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repairs towel rail 600 mm long of PTMT fixed with and inluding Chromium Plated brass srews and wooden/plastic leats (minimum weigh 190 gms) complete all as specified and directed.

S&F in repairs PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle includings brackets complete all as specified and directed..

S&F in repairs PVC connection pipe 15mm dia with PTMT nut for length 450mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness below or above ground level complete all as specified and directed..

Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement complete all as specified and directed..

M&L coloured Non - skid Ceramic tiles joint free 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in cement mortar 1:6 complete all as specified and directed.

All as per item No. 60 but as in skirting over and including rendering 10mm thick in cement mortar 1:4

Vitrified ceramic tiles joint free light shade 10 mm thick (Square/Rectangular) polished area of ech tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15mm thick cement screed in cement mortar 1:6 complete all as specified and directed.

All as per item No. 62 but as in skirting over and including rendering 10mm thick in cement mortar 1:4

M&L Coloured Glazed ceramic/printed tiles in vertical surface 300x200x7mm/450x300x7mm thick in vertical surfaces as in skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L rubber finished chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and no pigments over & including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed.

S & F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fasteners complete all as specified and as directed.

S&F 8 mm thick calcium silicate board of silicious and calcerous material reinforced with cellulose fibre for fixing in snap grid work ( frame work for ceiling shall be measured and paid separetly) complete all as specified and directed.

S & F PVC wall lining consisting of 7-8 mm thick hollow printed colour PVC sheet inclusive of solvent cement complete all as specified and as directed by Engr-in-Charge.

Dismantling of plain/corrugated steel sheet any guage, thickness including naintal or similar pattern roof covering or any description complete all as specified and as directed by Engr-in-Charge.

S&F galvanised, corrugated mild steel sheeting 0.8mm thick with two corrugation side lape fixed with L-type and J type or crancked hook bolt in liew of screw, in roof wall, hanger etc with grade of zink coating 275

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins,arches,pillars etc complete all as specified.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radious built in CM 1:6 complete all as specified

M&L for 12mm thick plaster on fair faces of brick work or concrete surfaces in CM (1:6) finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering for 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished surfaces even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measued and paid separately as supply only.

Supply only integral water proofing compound

M&L for rendering 5mm thick on fair faces of ceiling in CM 1:3 finished surfaces even and smooth without using extra cement complete all as specified and directed.

Preparation of new plaster surfaces of wall and applying two coats of synthetic enamel paint over a coat of solvent based priming paint in using min 3 tints in camoflaging pattern complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying a coat of white wash complete all as specified and directed

All as Srl Item No. 85 but on ceiling surfaces

All as Srl Item No. 85 but one coat of oil bound distemper on wall

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of primaring coat and Birla putty filling the surface of walls complete all as specified and directed.

M&L for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Preparation of old painted surfaces of steel and iron of any description over 10cm width or grith and one coat of synthetic enamel paint using minimum 3 or 4 different approved tint/colour as approved by GE all as specified

Preparation of old treated surfaces of of any description over 10cm width or grith not otherwise described over, applying one coat in camouflage pattern using minimum 3 different approved tint/colour of synthetic enamel paint complete all as specified

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick cement screed in cement mortar 1:4, rubbing and poilshing complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of stes, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement motar 1:4, rubbing and polishing complete all as specified and as directed.

Dismantling of AC/fibre glass translucent corrugated or semi corrugated steel sheet including ridges, hips, valley etc of any discription and thickness in roof coverings all as specified and as directed

S &F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed

S &F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Deol Builders