Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹14.7 L+₹55,861.50 (3.94%)Rejected-Finance | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹15.1 L+₹97,007.50 (6.84%)Rejected-Finance | L3 | Rejected-Finance Third lowest bidder | |
| 4 | L4₹15.4 L+₹1.2 L (8.47%)Rejected-Finance HIMACHAL PRADESH HP | CHAMBA | HIMACHAL PRADESH | 176315 | L4 | Rejected-Finance Fourth lowest bidder | |
| 5 | L5₹15.9 L+₹1.7 L (12.3%)Rejected-Finance | L5 | Rejected-Finance Fifth lowest bidder |
Tender Value
₹12.2 L
EMD Value
₹24,400
Closing Date
5 May 2021, 5:00 pmClosed
Executive Engineer
HPSIDC Ltd. Shimla (HP)
SRMO roads, road side drains at Ind. Area Raja Ka Bagh (Plot No. 12 to 47) Distt. Kangra (HP).
2021_SIDC_46939_1
Job No. 10
Open Tender
Civil Works
Item Rate
120 days
Kangra
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,400
₹24,400
2 Aug 2021
28 Apr 2021
6 May 2021
28 Apr 2021
5 May 2021
28 Apr 2021
Amount
Clearing jungle i/c uprooting of rank vegetation grass,bush wood, trees and saplings of girth upto 30cm measured at aheight of 1 mtr. Above ground and removal of rubbish upto distance of 20mtrs outside the periphery of the area cleared.upto30cm., Road
Preparation of sub grade by dressing to camber, (earth work for cutting involved for sub grade to be paid for separetly)in all kinds of soil completed as per HPPWD specifications.
Consolidation of sub grade by dressing to camber, (earth work for cutting involved for sub grade to be paid for separetly)in all kinds of soil completed as per HPPWD specifications.
Excavation in foundation trenches etc.in earth work in all kind of soil upto all depths and all lifts and stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating each deposited layer i/c dewatering where required, by ramming, watering and then disposing of all surplus excavated earth as directed in all leads all leads and lifts.
Providing, laying,spreading and compacting grade stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer( Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub- base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density i/c lightining, barricading and maintenance of diversions,etc.as per technical specifications Clause 406. By mechanical means.
Providing and laying of interlocking concrete block pavements ISI mark M-40 mix as per drawings and technical specification Clause 1504 including carriage of material within all leads and lifts. Coloured blocks red and grey. 80 mm thick.
Excavation in dumped stone or mulba i/c stacking of serviceable and un-serviceable material separetely and disposal of un-serviceable material lead upto 1.5 mtr. disposed material to be neatly dressed.
Providing and laying Cement concrete 1:4:8(1cement:4sand:8graded crushed stone aggregate 40mm nominal size) and curing complete inculding cost of form work in foundation and plinth.
Plain cement concrete M-10(1:3:6 nominal mix) in levelling course below open foundation of head walls as per drawing and specification clause 1109.I/c form work complete.
Providing and laying Cement concrete flooring in 1:2:4 (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) in sub-structure and curring complete including the cost of form work.
Providing and laying Cement concrete 1:1.5:3 (1cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) in super structure and curring complete including the cost of form work . As per drawing and technical specifications clause 800, 1205.4 &1205.5.
Providing tor steel reinforcement for RCC work including bending binding and placing in position in all heights as per HPPWD specifications.
15mm cement plaster in single coat on rough/fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rouded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand).
Providing and fixing of dual directional delinators made of dia 18 guage rectangular pipe of size 25x63mm and of length 600mm pipe stove enameled and baket to 120 c/power coated head made of ABC plastic rounded moulded with flat face, provided with high intensity prismatic reflectors of colour (white/red) of size 100 x 125 mm with addtional reflective strip 20mm wide make RS mark.
Single legged stop sign boards (900mm octagon) micro prismatic grade retre reflective board made out of 12mm thick aluminium or ACP sheet to be covered with micro prismatic grade retre reflective sheeting as per IRC standards, the back of aluminium sheet to be painted with epoxy paint of standard make, fixed to structural steel frame work of MS angle 25x25x3mm with nuts/bolts/rivets ensuring safety against removal of plates, fixed to one vertical post of 65x65x5mm anglehaving length of 1.80 mtr long complete in all respect.
VISHAL PATHANIA
MOHAMAD HAFIZ
Arun Kumar
VISHAKH SOODAN
sourav mahajan
JAKUB DIN
sher fibre
ANKUSH KUMAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .