07 Webel IDM WML EleACFire 20 21 26

Amount

ELECTRICAL

DISTRIBUTION BOARDS

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attchment

Up to 160A

8 Way Enclosure

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attchment

4 Way Enclosure

Supplying and fixing double door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attchment

Supplying and fixing 240/415 V MCB of breaking capacity 10 KA & C characteristics on din rail of existing DBs and necessary connection

Surge Protective Device

Supplying and fixing Class-2 (T2) 415V, FP Surge Protective Device (SPD) of Imax 40kA/pole mounted on din rail of existing DBs and necessary connection

SITC of 63A MCB in the existing floor panel with necessary connection as required

MV Cable & Termination

Supplying, laying, testing and commissioing of 1.1KV grade, A2XFY XLPE Armoured Aluminium cable of following size with all necessary accessories required for installation on the wall above false ceiling and concealed/surface on wall below the false ceiling, Rate shall include with 2 NOS. 8 SWG GI earth continuity Wire for running earth and all civil work like cutting dressing mending good damages as required. The cable shall be laid underground/on wall/in trench-the rate shall be included necessary clamping arrangement as required.

4 core 25 sqmm

Cable End Termination

Supplying and fixing Double Compression type Gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE armoured cable as below:

4 core 25 sqmm

Finishing the end of following XLPE armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make),tapes,anticorrosive paste & jointing materials:

4 core 25 sqmm

SUB MAINS/CIRCUIT MAINS

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Rigid/Flexible Conduit 'FRLS' (ISI Marked) on wall/ceiling/Furniture as per site requirement (concealed / surface)

Supplying & drawing of wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire in 20mm size PVC rigid/flexible conduit (as per direction by EIC) 'FRLS' including necessary Fittings and necesaary connections as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Casing-Capping on wall/ceiling/Furniture as per site requirement

Supplying & drawing of Wiring in 1.1 KV grade single core stranded 'FRLS' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping (as per direction by EIC) including necessary PVC clips, fittings, necessary connections as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

POINT WIRING

Supplying and carrying wiring for light, fan and dependent socket points by using 16 SWG MS/PVC conduits with threaded joints of required dia as per IS 732, MS conduit accessories, MS/PVC flexible conduit with couplers for drops with accessories, 2 x 1.5 + 1 x 1.5 sq mm, 1100V grade FRLS PVC insulated copper wires approved 6A modular type switches and sockets with plates and all accessories for fixing in modular furniture, GI/PVC boxes and other point wiring accessories and carrying out surface/concealed conduit system of wiring as per requirement with all wiring materials. Conduits shall run on surface of the ceiling above false ceiling and concealed in wall by cutting chase in wall and mending good of all the damages.

All points shall be earthed with 1.5 sq mm FRLS flexible copper wire. Wires shall be terminated at light fixtures with ferrules, 16A, 4 way connector, wire ends shall not be kept loose/bare.

The rate shall also include all accessories of MS/PVC conduits, etc, necessary civil works for embedding conduits and boxes below false ceiling, wherever applicable.

1 light point controlled by 1 no. 6A switch

2 light points controlled by 1 no. 6A switch .

3 light points controlled by 1 no. 6A switch

Exhaust Fan point controlled by 6 Amp Switch

SWITCHES & SOCKETS

SIT & C of the following components like approved plate type modular switches, socket etc, duly wired. All the switch sockets are with front plate and without boxes since the same is covered under different item.

1 No. - 6/16A, 6 pin in universal socket controlled by 16A, SP switch , RP in workstations and in cabins, with MS/PVC Box.

Same as above but without MS/PVC Box

3 Nos - 6A, 5 pin socket controlled by common 16A, SP switch , workstations without MS/PVC Box

Same as above but with MS/PVC Box

1 No. - 6A, 6 pin in universal socket controlled by 6A, SP switch, for Wi-fi with MS/PVC Box.

LIGHT AND FAN FIXTURE WORK

INDOOR TYPE LUMINAIRE

Supply, installation, testing and commissioning of light fixture complete with all accessories, as required. Erection rate shall include necessary GI chain and supporting suspending hardware for fixing the light fittings.

Suspension mounted light fixture (Philips Cat No. SM270C LED 30S 6500 PSU WH).

Recessed mounted circular down lighter (Philips Cat No. DN296B LED 20S 6500 PSU WH).

Supply, Installation testing & commssioning of Track mounted accent lighting luminaire with compact housing and slim gear box with Color rendering Index of 90 with all accssories complete. (PHILIPS ST391T LED10/930 PSU-E NB 1C WH IN (Flex Accent G2) OR SIMILAR APPROVED EQUIVALENT)

WALL MOUNTING FAN

Supply, Installation, Testing & Commissioning of "Decorative Wall-Mounted" oscillating type fan with inbuilt speed controller. The rate shall be inclusive of fixing & mounting accessories and making necessary connections as required. Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

450mm Sweep wall fan. (HAVELLS AIRBOLL HI-SPEED OR SIMILAR APPROVED EQUIVALENT)

EXHAUST FAN

Supply and installation of 300 mm dia exhaust fan with aluminium louver including cutting hole in wall, finishing and grouting all complete.

Dismantling

Dismantling of existing light fittings,switch boards, conduit, if any.

AC Sockets

Supply and flush fixing of modular type heavy duty plug socket unit comprising of 16/25A socket and plug top (with indicator) and solid state type starter units of electronic type with highflow voltage protections, O/L protect etc and suitable for 1.5/2.0 TR AC Units modular type and completely wired including cutting chases and mending good damages, painting, earthing, necessary connections complete, as per required for AC Units.

MCB Enclosure for AC

SITC of 6-32 Amps DP MCB (D-Curve) with metal enclosure (outdoor type-IP65)near AC ODU (concealed/surface)

Empty Conduits

Supply and fixing of FRLS PVC (ISI marked) conduit (rigid/flexible) of various dia, exposed or concealed with all accessories like tees, bends, glands etc. JBs (PVC) as required and fish wire etc for wiring purpose complete and mending good damages to building works.

20 mm dia (2 mm thick)

Supplying and fixing PVC casing-capping on wall or ceiling, including elobw, necessary PVC fittings etc. amd mending good damages to building works

20x10 mm Size

CASSETTE TYPE SPLIT AC

Supply, Installation, Testing & commissioning of Air Cooled Cassette ,Non-Inverter Split Type Air Conditioning Machines of following cooling capacities with Rotary / Twin Rotary type compressor, chordless remote. The condenser will comprise of copper tube aluminium finned coil with safety controls and refrigerant R - 410A gas as required.

1.5 tr - 3 star

2.0 tr - 1 star

HI WALL SPLIT AC

Supply, Installation, Testing & commissioning of Hi-wall Split 1st charge R-32 gas BEE 3 STAR RATED non inverter type air-cooled split Air-conditioner with cordless remote, hermetic/semi hermetic rotary type compressor having with copper coil of IDU & ODU, 3 Mtrs. Copper pipe with Armaflex insulation and 25 mm hard drawn UPVC piping with Armaflex insulation for sweat water drain complete as per direction of Engineer-in-charge. Extra copper pipe line (Suction & Liquid) beyond 3 mtr. will be paid extra as per measurement.

2.0 tr - 3 star rated

REFRIGERANT PIPING

Supply and installation testing & commissioning of required size soft/hard drawn refrigerant piping for the 1.5/ 2.0 TR. Cassette type A.C. Units including Nitryle Rubber Insullation.

Supply and installation of required size soft drawn refrigerant copper piping of Hi-wall type 2.0 TR A.C. Units including required size Nitryle Rubber insulation.

DRAIN PIPING

Supplying and laying of condensate drain line with PVC pipe complete with all accessories with 6mm Nitryle Rubber Insulation .

CABLE

Supply & laying, dressing, clamping, testing and commissioning of 1.1 KV grade, stranded copper conductor, PVC insulated, extruded PVC inner sheathed, Galvanized wire/strip armoured and PVC outer sheathed LT control cable confirming to IS 1554 (Part-1) and of following size.

ODU STRUCTURE

Supplying and installation of powder coated ODU Angle for installation of Out door unit with all accessories including ribbed neoprene VI Pads , for Hi-wall splits & Cassettes AC machines

2.0 (Hi-wall Split AC) & 1.5 / 2.0 TR (Cassette AC)

FIRE FIGHTING

FIRST AID FIRE EXTINGUISHER - ABC TYPE

Supply and Fixing of "ABC Powder Type Fire Extinguishers" shall confirm IS : 15683 & IS : 14609 with initial fill & all mounting accessories etc. complete.

2KGS CAPACITY.

FIRST AID FIRE EXTINGUISHER - DCP TYPE

Supply and Fixing of "Dry Chemical Powder Type Fire Extinguishers" shall confirm IS : 15683, IS : 4947 & IS : 4308 with initial fill & all mounting accessories etc. complete.

4KGS CAPACITY.

FIRST AID FIRE EXTINGUISHER - CO2 TYPE

Supply and Fixing of "Carbon-di-Oxide Type Fire Extinguishers" shall confirm IS : 15683, IS : 7285 & IS : 3224 with initial fill & all mounting accessories etc. complete.

4.5KGS CAPACITY.

ADAS INDIA

SILICON SOFTWARE

Mukherjee Commercial Enterprise

Abdul Electricals and Infrastructures Pvt Ltd

The Suburban Electric Co.