Loading
Loading…
Loading…
Tender Value
₹2.3 L
EMD Value
₹4,600
Closing Date
15 Sept 2026, 6:00 pmDue today
EXECUTIVE ENGINEER REW BARAMULLA
EXECUTIVE ENGINEER REW BARAMULLA
DEVELOPMENT/IMPROVEMENT OF PANCHAYAT GHAR AT D Y PORA, UNDER ADP/PRI, FY-2026-27, HALQA DY PORA, BLOCK- SINGHPORA.
2026_RDPR_323873_18
e- NIT No. 219/2026-27 Dated 08-09-2026 (RETENDER)
Open Tender
Civil Works
Percentage
45 days
BARAMULLA
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Rural Development and Panchayati Raj
₹4,600
8 Sept 2026
8 Sept 2026
16 Sept 2026
8 Sept 2026
15 Sept 2026
8 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal Size) | 0.79 | cum | 5,202.9 | ₹4,110.29 |
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete : Size of tile 600x600 mm | 24 | Sqm | 1,395.1 | ₹33,482.4 |
| 3 | Providing & Fixing of Readymade wooden panelling of Budloo wood/Kd Wood (12 mm thick) of approved make as approved by Engineer In Charge and standard quality over frame work of 12 mm thick plywood incl. polishing , fixing charges etc complete job | 31.78 | Sqm | 1,900 | ₹60,382 |
| 4 | Providing and fixing of panelled or panelled and glazed door shutter of K.D wood incluiding 25mm to 40mm thick panel with ISI marked butt hinges | 4.53 | Sqm | 3,800 | ₹17,214 |
| 5 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete : 150 mm tower Bolt | 6 | No | 83.8 | ₹502.8 |
| 6 | 250mmx16 Al Drop | 3 | No | 251.95 | ₹755.85 |
| 7 | 125 mm Handle | 6 | No | 68 | ₹408 |
| 8 | Applying priming coat or more coats on new work With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | 9.06 | Sqm | 64.6 | ₹585.28 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work | - | sqm | 131.85 | - |
| 10 | Finishing walls with water proofing cement paint of required shade on
New work (two or more coats applied @ 3.84 kg/10sqm) | 104.55 | sqm | 98.75 | ₹10,324.31 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.26 MB
BOQ_1091570.xls
BOQ • 0.91 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .