Community Toilet Block

Name of work : Construction of Community Toilet Block Near Bus Stand at Lakhatar, Ta.:- Lakhatar, Dist.:-

BILL OF QUANTITIES

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

1 Excavation for foundation upto 1.5 m depth including 153.00 Cu.M. 117.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

2 Providing and laying cement concrete 1:4:8 (1- Cement : 4 19.00 Cu.M. 2827.20

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

3 Brick work using common burnt clay building bricks having 54.00 Cu.M. 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

4 Providing and laying cement concrete 1:3:6 (1- Cement : 3 4.00 Cu.M. 3974.36

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Wall Caps / Coping

5 Filling in plinth with sand under floors including watering 15.00 Cu.M. 424.90

ramming, consolidating and dressing complete

6 Brick work using common burnt clay building bricks having 41.00 Cu.M. 4289.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

7 (i) Half brick masonry in common brunt clay building bricks 118.00 Sq.M 651.67

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

8 Providing and laying ordinary cement concrete 1:1.5:3 (1 13.00 Cu.M. 10340.71

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

9 Providing and laying ordinary cement concrete 1:1.5:3 (1 3.00 Cu.M. 8482.57

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

10 Providing and laying ordinary cement concrete 1:1.5:3 (1 8.00 Cu.M. 8035.64

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(ii) Having

cross sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

11 Providing and laying cement concrete 1:1.5:3 (1- Cement : 1.5 3.00 Cu.M. 6855.56

Coarse sand : 3- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of

12 Providing and Laying ordinary cement concrete 1:1.5:3 (1 10.00 Cu.M. 7258.19

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness

13 Providing TMT Bar FE 500D reinforcement for R.C.C. work 3735.00 Kg. 76.21

including bending, binding and placing in position complete

upto floor two level

14 Providing and fixing single shutter flush door with standard 27.00 SQM. 5253.23

alluminium colour anodized hollow section frame approved

shade & colour & rectenglure tube shape main frame of

jindal section no. 4656 of the size 101.60 mm x44.75 mm x1.63

mm having weight 1.089 kg.per meter filled with country

wood 35 mm yhick flush door laminated both side with

mm thick lamination of the make sunmica/Decolam formica

of equivalent lamination,using U type alluminium beading

around door,three nos.of stainless steel hinges for shutter of

required size fixtures fastening &all other hardware fixtures

and fastenings like handles stopper,aldrap tadi shall be of

stanless steel of approved quality & size directed by

Engineer in charge etc.

15 Providing and fixing window having extruded aluminum 10.00 SQM. 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

16 Providing and fixing M.S. grills of required pattern to 534.00 KG. 101.17

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

17 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 64.00 Sq.Mt. 1204.20

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

18 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 6.00 Sq.Mt. 1141.45

24'' in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

19 Providing and laying white glazed tiles 6mm thick in 26.00 Sq.Mt. 827.19

flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

20 Providing and laying white glazed tiles 6mm thick in skrting 93.00 Sq.Mt. 857.42

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

21 Providing 15mm thick cement plaster in single coat on 479.00 Sq.Mt. 234.33

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

22 Providing 10mm thick cement plaster in single coat on 115.00 Sq.Mt. 138.71

brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i)Cement mortar 1:3

(1-cement:3-sand)

23 20mm thick sand faced cement plaster on walls upto height 217.74 Sq.Mt. 325.50

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

24 Applying two coats of putty & two coats of primer of 418.00 Sq.Mt. 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

25 Wall painting (two coats) with plastic emulsion paint of 418.00 Sq.Mt. 78.90

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

26 Providing and fixing wsh down water closet (European type, 13.00 Nos. 1303.71

W.C. Pan) with integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white colour

27 Providing and fixing Urinal of approved quality including 8.00 Each 1554.17

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm x

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

28 Providing and fixing PVC SWR Nahni trap IS 14735 for drain 18.00 Each 558.36

- 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

29 Providing and fixing S.W. gully trap with C.I. grating brick 5.00 Each 1292.19

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

30 Providing and fixing washbasin with single hole for pillar 5.00 Each 1836.79

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x

v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts. (ii) 20mm

31 Providing laying and jointing in true line and level 15mm 100.00 Rmt. 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

32 Providing laying and jointing in true line and level 25mm 100.00 Rmt. 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

33 Providing and fixing Gun metal check or non-return fullway 4.00 Each 420.63

wheel valve.(C) 25mm dia.

34 Providing and fixing screw down bib taps of following 20.00 Each 214.81

size.(A) Brass screw down bib tap polished bright. (ii) 20mm

35 Providing and fixing 100mm size P or S trap for water closet 13.00 Each 316.56

squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

36 Constructing brick masonry chamber for underground C.I. 5.00 Each 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

37 Providing and fixing to wall ceiling and floor 10.0 Kg. 90.00 Rmt. 277.43

F/Cm2 working pressure polythene pipes of the following

outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(F) 75mm

38 8 Providing and fixing to wall ceiling and floor 10.0 Kg. 90.00 Rmt. 336.24

F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110 mm

39 Providing cement vata (10 cm.x 10 cm. size) quarter round in 32.00 Rmt. 23.68

cement mortar 1:1 including neat cement finishing,watering

40 Providing erecting and fixing double coated ISI water tank of 2000.00 Ltr. 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

41 construction underground sock well 1.50 m. diameter & 3.0 1.00 Nos. 28123.42

mt. in depth with Honey comb Brick masnory having

crushing stg. Not less than 35 kg/sqmt. In C.M. 1:5,0.35M

THICK AT BOTTOM 1.50 MT.&0.23 MT Thick 1.00 m of

honey comb masnory and 0.23 m thick 0.50 m Ht top level

RCC 1:2:4 slab 0.10 m thick of top including inspection gap

0.60 m x 0.45 m and cover Ready made F.R.C. Cover whole

work as per instruction of Engineer in charge etc. complete

42 Finishing wall with weather proof exterior emulsion paint on 216.00 Sq.Mt. 114.53

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

43 Providing and Fixing Marble Slab Polished granite stone 20 10.80 Sq.Mt. 2567.79

to 25mm thick black

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

44 Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) BOTH ARE OF ISI marked 1.1 KV grade

FRLS PVC inculated multi strand copper wires up to 10 m

length in below type of pipe erected with 6A Moduler typr

switch /bell push &accessories and earth continnuity of

following type ,erected on PVC /M\etalic /Wooden box, 30.00 Point 375.72

single mounting base frame covered with textured

/metalic/white front plate modules erected on /in

wall/celling as per pipe erected with necessary lamp

holder/celling rose /H.D. Connector as directed.

(a) with medium class Riged PVC pipe and accessories

45 Point wiring for on board looped PLUG with tissino type

single pole ISI marked switch & socket erected with

necessary connections erected on wooden /metal/PVC box 10.00 Point 163.62

covered with 3 mm thick PC(Polycarbonate)/acrelic sheet for

open concealed wiring for following size (b)For

46 Providing & erecting pipe type earthing having 150 cms.

Long and 2.5 cms. Dia. Galvenised ironpipe with coupling

and buch buired in specially prepared earth pit complete

with necessary 8 SWG Earth wire

47 Salt and charcoal/coke for pipe type earthing 1.00 Each 171.70

48 Providing & erecting approved make celling fan with double

ball bearing ISImarked with condenser A.C. 230 V,50 c/s.

1200 mm sweep complete,canopy erected on existing hook or 2.00 Each 1596.81

clamp with earthing ( make shall be approved by engineer in

49 CFL Lamp retrofit 9/11 watt, erected if required cat-II 5.00 Each 77.77

50 Plastic enclousure fitted with DIN rail suitable for 1-2 MCBs

51 PGVC Ltd. Meter connection charges 1.00 Each 5050.00

52 Power connection charges from PGVCL/GEB including

estimate charges & meter connection.

53 Providing & erecting open well horizontal mono block

pump set with cast iron body,complete for three phase

submersible motor having (A) For 1.5 HP 3 phase open well 1.00 No. 10284.83

horizontal mono block pump set suitble for 190 LPM @20

Mtr. Head suitable for 40 mm dia delivery pipe Cat.II

54 Tube Light with integral driver item(v)36-40 watts,surge-2

KV,IP-20,Conventional 4 feet

Rs. Twenty Lacs Ninety Five Thousand Five Hundred Twenty Nine and Twenty Eight Paisa

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat (R&B) Division

Dhrangadhra Surendranagar