Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | ₹8.7 L | L1 | Accepted-AOC ACCEPT |
| 2 | L2₹9.3 LRejected-AOC SREELAKSHMI HOUSE KOLAKKOTTUCHOLA P O MALAPPURAM KERALA | MALAPPURAM | MALAPPURAM | KERALA | 676517 | ₹9.3 L | L2 | Rejected-AOC REJECT |
| Sl No | Description | Qty | Unit | JIJEESH P L2 | Anujith. M L1 |
|---|---|---|---|---|---|
| 1.00building maintenanance | |||||
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 162.56 | sqm | 172.29 ₹28,007.46 | 161.33 ₹26,225.80 |
| 1.00 | OD357766/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 252.7 | sqm | 630.2 ₹1.6 L | 590.1 ₹1.5 L |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,189.24 | kg | 188.99 ₹4.1 L | 176.96 ₹3.9 L |
| 1.00 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 22.5 | sqm | 585.75 ₹13,179.38 | 548.48 ₹12,340.80 |
| 1.00 | 13.41.1:Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work ( Two or more coats) over and including priming coat with water thinnable cement primer | 969.14 | sqm | 205.98 ₹2.0 L | 192.87 ₹1.9 L |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 327.3 | sqm | 166.57 ₹54,518.36 | 155.97 ₹51,048.98 |
| 1.01 | 13.50.4:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | 256.5 | sqm | 37.69 ₹9,667.49 | 35.29 ₹9,051.89 |
| 1.01 | 11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | 37 | sqm | 1,447.97 ₹53,574.89 | 1,355.83 ₹50,165.71 |
Tender Value
₹8.5 L
EMD Value
₹21,172
Closing Date
29 Oct 2025, 6:00 pmClosed
AE Parappanangadi Municipality
AE Parappanangadi Municipality
Annual Plan project no 145 25 26 GLPS parappanangadi maintenance div 43 in parappananagadi municipality General Civil Work
2025_LSGD_813048_36
AE/TEN/4/2025/LSGD/PGDI
Open Tender
Civil Works - Roads
300 days
AE Parappanangadi
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,172
Yes
29 Jan 2026
23 Oct 2025
31 Oct 2025
23 Oct 2025
29 Oct 2025
23 Oct 2025
Amount
building maintenanance
15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet
OD357766/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
13.41.1:Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work ( Two or more coats) over and including priming coat with water thinnable cement primer
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.50.4:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
JIJEESH P (BID ID -2414274)
Bidder Name
JIJEESH P
Anujith. M
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1360795.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
145NITSBD.pdf
Tender Documents • 2.26 MB
BOQ_1360795.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid