PROVISION OF CHAIN LINK FENCING ALONG ROAD IN M SECTOR AT DOLPHIN HILL SPECIAL REPAIRS TO BUILDING AT VOLNA TOWER COMPLEX AT DOLPHIN HILL PROVISION OF INTERLOCKING TILES FOR BLO COMPLEX P 54 AT NAVAL DOCKYARD SPECIAL REPAIRS FOR RENEWAL OF COLOUR SC

Amount

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of stone masonery surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth with using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.

M & L for preparation of plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over putty (two coats required) including sand papering on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M & L for complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over two coats of putty including sand papering on external walls / ceiling surfaces to obtain smooth finish work up to 5th storey complete all as specified and as directed. (including necessary scaffolding for work upto 5 stories) Make : (i) Weather coat paint :Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in Hard / Dense soil complete all as specified and as directed.

M&L for Plain Cement Concrete 1:3:6 type C-2, (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Removing Excavated spoil to a distance execeeding 1.50 km but not exceeding 5 KM and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Removing building materials etc (other than spoil) to out of MD land including loading and unloading at the destination complete all as specified and as directed. Note : One metric tonne shall mean ‘one load’ as given on Sl page No. 462 of SSR Part II [2010]

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe 410 -W (GdeE- 250) qualityA) complete all as specified and as directed.

S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Gde Fe 410-0 complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH, JINDAL

M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

M&L for TMT steel bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Demolition of un-reinforced cement concrete in ground floor and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thick, M-40 Grade over and including sand cushion of 75mm thick complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulders complete all as specified and as directed.

M&L for 100mm thick Plain cement concrete type B-1 1:2:4 (using 20mm graded granite stone aggregates) complete all as specified and as directed

M&L for 75mm thick, Plain cement concrete 1:4:8 type D2 (using 40mm graded granite) complete all as specified and as directed

Material and Labour for Walling of random rubble [ KONDALITE STONE], uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M & L for Flush pointing to random rubble masonry uncoursed or brought up to courses in cement mortar 1:4 complete all as specified and as directed.

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in coping, bed blocks etc., including necessary form work complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed.

S & F Mild steel work in posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F mild steel round bars 10mm dia as in straing bars to fencing complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanisd fencing, 4mm dia galvanized iron chain link fencing of any size complete all as specified and as directed.

S&f Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed.

S & F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks, framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including ending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Supply and Fix Aluminium frame for doors, windows, ventilators, fixed partitions, rails and styles of door shutters etc [ ISI Marked ] with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, made of aluminium extruded section body complete all as specified and as directed.

M & L 12 mm thick prelaminated particle board, exterior grade, prelaminated with decorative choice lamination on both sides, fixed with screws to timber frame work to aluminum frame work with rubber beading etc. complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit shall be measured as one unit. MAKE :(i) CABLE :Havells, Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/FINOLEX / PRECISION/ KALINGA [ALL ARE ISI MARKED]

S & F MCB DB Single Pole and Neutral 4 way sheet steel phospetised powder painted with 200 amps rated bus bar 240 V nautral link, double door complete all as specified and as directed. Make:Indo Asian Optipro 811805 / L&T / C&S / Schneider / Legrand

S & F MCB SPN 20/32 Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811149/811151 / STANDARD / HAVELLS/Schneider

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

Supply and fix LED post top lanterns made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP 65 Protection and accessories complete all as specified and as directed. Make : Bajaj cat no BGCT W 4 LED WW 40W LED (112364) / Philips / HAVELLS / Surya / Wipro / GE

Supply and fix Integral decorative LED bollard opal acrylic with IP65 protection post top lanterns and accessories complete all as specified and as directed. Make : Bajaj cat no 111284 BGBOM650 9 W LED / Philips / HAVELLS / Surya / Wipro / GE

Taking down un serviceable of MCCB's, MCB's, DB's, test poin terminal block from walls by disconnecting all existing cables complete all as specified and as directed.

Taking down carefully existing copper/ aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete including fitting and fixture such as (switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc. complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm (Nominal area) PVC insulated unsheathed FRLS grade stranded copper conductor cable 1100 Volts grade drawn through and including concealed PVC rigid conduit non-metallic 20 mm bore Medium grade including 1.5 Sq.mm PVC insulated insheathed FRLS grade copper cable solid conductor as earth lead including MS consealed/ semi concealed terminal boxes made of 2mm thick MS sheet covered with 3mm thick laminated sheet including cutting of stone masonary/ wall complete all as directed for One light/fan/ Exhaust fan point controlled by one No one way switch complete all as specified and as directed. MAKE :(i) CABLE : Havells, Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/FINOLEX / PRECISION/ KALINGA [ALL ARE ISI MARKED]

All as per item No. 50 above but for one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board complete all as specified and as directed.

All as per item No. 50 above but for one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board complete all as specified and as directed

All as per item No. 50 here in befre but point wiring with 2.5 Sqmm single core copper conductor cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and as directed

All as per item No. 50 here in befre but point wiring with 4 Sqmm single core copper conductor cable and earth continuity wire with 4 Sqmm single core cable for AC point complete all as specified and as directed.

S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed. Make : Anchor/Legrand/MK/Leader

S&F Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and directed Make : Anchor / Bajaj / Cona /Leader

S & F switch piano flush type single pole 6 Amps oneway AC 230V, 50HZ supply complete all as specified and as directed. Make : Anchor / Cona / Bajaj /Leader

S & F switch piano flush type single pole 16 Amps oneway AC 230V, complete all as specified and as directed. Make : Anchor / Cona / Bajaj /Leader

S&F Socket outlet 2 in1, 3 pin, 5 Amp flush type,universsal complete all as specified and directed Make : Anchor / Bajaj / Cona /Leader

S&F Socket outlet 2 in1, 3 pin, 5 and 15 Amp flush type,universsal complete all as specified and directed Make : Anchor / Bajaj / Cona /Leader

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand /Leader

S & F sheet metal enclosure SPN with two pin and earth plug and socket 240volts grade complete with one single pole MCB of 25Amps capacity for AC etc complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F Distribution Board, TPN, 8 Way, Double door complete all as specified and directed. Make : Indo Asian cat part No. 811844[Optipro] / Standard / Havells / HPL

S&F SPN DB 12 way with 200Amps rated bus bar, complete all as specified and as directed. Make : Indo Asian cat part No. 811808 [Optipro] / Standard / Havells

S&F SPN DB 8 way with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807 [Optipro] / Standard / Havells

S & F MCB SPN 40A Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811152 / STANDARD / HAVELLS/Schneider

S & F MCCB, 125 Amp, four pole, 415 Volts,16KA complete all as specified and as directed. Make: Indo Asian Cat part No. 830023 / STANDARD / HAVELLS/Schneider

S&F surface batten and LED tube light, retro bar professional WH 5700K and 1800 lumins of cool white with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size complete all as specified and as directed. Make for Batten : Bajaj cat no BLRB DB 118 for 1x18 W LED / HAVELLS Cat no LHFYBYPNIAWO022 /SURYA Cat no SLE DB 18 LED ALPHA / PHILIPS / GE / Wipro Make for LED tube : Bajaj cat no BLRB 18 W CW / HAVELLS Cat no LHLDDAXEUL8ZO18/SURYA SLE TL DS 18P/ PHILIPS / GE / Wipro

S & F LED Mirror Light 6K 1000 lumins 10 watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE BTN 10 watts mirror light / Bajaj / Havells / Philips / GE / Wipro

Disconnecting elect connection and taking down of exhaust fan of any make and any height, dismantling blade and removing fan along with blade and refixing the same in its original position complete all as specified and directed

S&F 'CUB' LED 25W street light ,pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lensus with all accessaries including 1.5 M long 40/32 mm dia GI pipe bent to shape, MS flat bracket mounting clamps, bolt, nuts and washers, 1 Sq mm weather proof 3 core FRLS grade copper conductor to fitting including taken down existing complete all as specified and as directed. Make: Bajaj cat part No.BCLST 25W LED (169475) / Philips/ Havells/CG /GE/WIPRO

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32 x 6mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI wire 4mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 15 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

S & F Test Point Terminal Block made of Gun Metal or Phosphorus Bronze of size 75 X 75 X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed.

SRIKRISHNACONSTRUCTIONS

PVGSN RAJU

ALLURI CONSTRUCTIONS