Construction of Sump cum pump house at SP Canal (RD 12000), 0.20 lac gallons capacity Service reservoir and Pre-Settling Tank for WSS Banjar Basti Bela Wusan (D/S)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 mtr. from cutting edge.

In all kinds of soils

Ordinary rock

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

In all kinds of soils

Ordinary rock

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

All kinds of soil

Ordinary Rock

Dumping stones in horizontal on level excluding cost of stones

Supply of stones at site complete job

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level.

1:4:8( 1 cement: 4 coarse sand: 8 graded stone agg/ 40mm nominal size) crushed aggregate)

1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed aggregrate

CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Quarry)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttermg including strutting, propping etc. and removal of form for:

Foundations: footings, bases of columns etc. for mass concrete.

Walls(any thickness) include. Attached pilasters,buttresses,plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform..

Edges of slabs and breaks in floors and walls. (UNDER 20 CM WIDE)

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Arches, domes valuts upto 6m span

Extra for shuttering in circular work (20% of respective centring and shuttering items)

Foundations: footings, bases of columns etc. for mass concrete

Walls(any thickness) include. Attached pilasters,buttresses,plinth and string courses etc.

Lintels, beams, plinth beams, girders, bressumers and centilevers

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): (2nd class Kail wood).

Providing and fixing panelled or panelled and glazed shutters (30 cm thick) for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Float glass panes 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Ply wood 5 ply, 9 mm thick: Decorative ply wood both side decorativeveneer (type 1) conformiong to IS 1328 BWR type

Ply wood 5 ply, 9 mm thick: Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type

Providing and fixing wire gauze shutters (30 mm thick) using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class kail wood

Providing and fixing 40x5mm flat iron hold fasts 40cms long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement conc. blocks 30x10x15 cms 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal size).

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all omplete. (Welded).

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing of 1.8 mm thick M.S. sheet for eves boarding.The job includes fixing of M.S. sheet by electrowelding including applying of red-oxide primer and two coats of siver paint complete.

15 mm thick cement plaster on rough side of single or half brick wall of mix (1 cement: 6 fine sand).

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

12 mm thick cement plaster of mix 1:4 (1 cement: 4 fine sand mix).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

MARBAL STONE FLOORING : Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Udaipur green marble

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250 x 16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing and fixing of P.V.C. waste pipe for sink or wash basin including P.V.C, waste fitting complete.Flexible pipe 40 mm dia.

Providing and fixing of water geyser of approved quality 50 ltrs capacity including all fittings and charges,carriages,testing ,complete job.

Providing and fixing of 500 ltr P.V.C. Synetex or equivalent make including all fittings and fixing charges,all carriages complete job.

Providing and fixing of P.V.C. waste pipe/vent pipe of Prince make-Type B, complete.

100 mm dia P.V.C. Pipe

50 mm dia P.V.C. Pipe

Providing and fixing of pipe specials of Prince quality(Type-B)

100x50x100mm tee(with insp. Door)

50 mmdia door bend

50 mm dia cowel

100 mm dia collar

50 mm dia collar

100 mm dia P-Trap/S. Trap

100 mm dia bends

50 mm dia bends

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:

15 mm φ nominal bore (Medium)

20 mm φ nominal bore (Medium)

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)

15 mm φ nominal bore (Medium)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm φ nominal bore

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT shelf 440 mm long , 124 mm width and 36 mm height of approved quality and colour, we1ghing not less than 300 gms.

Providing and fixing lighting points in 1.5 sqmm multistrand pvc copper wire to be laid in conduits includind providing and fixing of 5-A switches,compete job.

Providing and fixing heating points in 2.5 sqmm multistrand pvc copper wire to be laid in conduits includind providing and fixing of 16-A switches,compete job.

Providing and fixing of 1200 mm sweep ceiling fans complete with accessories including dimmer of ISI mark complete.

Providing and fixing of exhaust fan in 1.5 sqmm stranded wire to be laid in conduits providing and fixing of exhaust fans,suitable switches complete.

Providing and fixing of MCB-16A of Indocap complete.

Providing and fixing of MCB distribution box 10 way main double door system ,complete job.

Providing and fixing thermocol 12 mm thick and wall-to-wall/carpets/furnishings of approved brand and manufacture to be fixed with synthetic adhesive with floor whereever required including stitching and rounding of edges or corners,compete as per the site requirements and as per the directions of engineer-in-charge.

Supplying of bedding including mattresses, quilts, blankets, bed sheets, pillows etc. for the bed of standard quality make (Moga cotton quality) including cotton covers,all carriages upto site of work complete job.

Supplying of standard quality utensils like pressure cooker of Hawkins make-02 No;Rice cooker of Havels make-1 No;Patila(Big and small)-2 No. each;steel glass-4 No;tumbler-6 No;Tea flask(Milton make)-1 No;Spoon stainless steel-Big and small -4 No. each;steel glass-6 NO;Gas stove (Double-burner)-1 No Prestigious make;Gas cylinder with pipe &Regulator-1 No;Room heater-01 No;Cooking heater-1 No;Masala/spices container (plastic)-6 No;Tea set(Bone chaina make )-1 No(Cup Saucer).complete.

P/F of M.S. expanded metal mesh of 20x20mm size and 1.6mm thick for gable openings duly fixed on angle frame by electrowelding including applying of approved priming coat rtc. Complete job.

Providing and incorporating PGI sheet strips 0.8 mm thickness at construction joints and all carriages upto site of work complete job.

Providing and fixing of 0.9 x0.9 mtr size M.S. manhole cover made out of 6 mm thick M.S. plate with ISA 50 x 50 x 6 mm frame including locking arrangements, priming coat and all carriages upto site of work ,complete job.

Providing and fixing of 65 mm dia G.I. half bend to be fixed in dome for aeration.

Providing and fixing of 150/100 mm dia 6mm thick M.S. pipe specials like M.S. Bends/tees/nipples etc. as per site requirements .The job includes manufacturing ,fabricating,fixing in position,cutting,all carriages,men and machinary, all charges ,complete as per directions of Engineer incharge.

Providing and fixing of 150/100 mm flanged joints ,12mm thick by electrowelding.The job includes all charges of welding,all carriages,cost of nuts ,bolts ,rubber washers,M.S. tail pieces 0.1 m wide at joints, complete as per site requirement and directions of Engineer incharge.

100mmφ flanged joints

150mmφ flanged joints

Providing and fixing flanged type Sluice Values of Kirlosker or equivalent make incuding Testing, commissioning and all carriages from divisional store Ganderbal to actual site of work ,complete job

150 mm dia Sluice value

100 mm dia Sluice value

Providing of anti-freezing admixture (Rapidite) in concrete with all carriages up to site of work, complete.

Providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. (1 Kg. of water proofing material in 50 Kg. of cement)

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

150 mm Φ D.I. pipe

100 mm Φ D.I. pipe

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Carriage of materials from divisional store/source upto dumping site of work by mechanical transport including loading ,unloading and stacking,complete.

Cement and steel for an avg. lead of 20 Kms

Sand/aggregrates for an avg. lead of 10 Kms

Aggregrates(40 mm nom. Size) for an avg. lead of 10 Kms

Bricks for an avg. lead of 50 Kms

Stones for an avg. lead of 10 Kms

150 mm dia D.I. pipes for an avg. lead of 20 Kms

100 mm dia D.I. pipes for an avg. lead of 20 Kms

Carriage of materials from dumping site to actual site of work including loading ,unloading and stacking etc. complete by manual labour

Steel for an avg. lead of 300 Mtrs.

Cement for an avg. lead of 300 Mtrs.

Sand/aggregrates(20 mm nom. Size) for an avg. lead of 300 Mtrs.

Aggregrates(40 mm nom. Size) for an avg. lead of 300 mtrs.

Bricks for an avg. lead of 300 Mtrs.

Stones for an avg. lead of 300 Mtrs.

Steel for an avg. lead of 500 Mtrs.

Cement for an avg. lead of 500 Mtrs.

Sand/aggregrates(20 mm nom. Size) for an avg. lead of 500 Mtrs.

Aggregrates(40 mm nom. Size) for an avg. lead of 500 mtrs.

150 mm dia DI pipes for an avg. lead of 500 Mtrs.

100 mm dia DI pipes for an avg. lead of 500 Mtrs.

Cement for an avg. lead of 600 Mtrs.

Steel for an avg. lead of 600 Mtrs.

Sand & Agg. for an avg. lead of 600 Mtrs.

40mm Agg. for an avg. lead of 600 Mtrs.

M/S MALIK CONSTRUCTION COMPANY

mohd maqbool dar