SPECIAL REPAIRS TO ACCOUNT SECTION, ROOF OF STORE, POINT WIRING IN CERTAIN SMQs ALONGWITH PROVISION OF UG CABLE AT AREA A, AREA B AND AREA C AF STATION WADSAR UNDER GE AF CHILODA

Amount

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in levelling course complete all as specified and directed

M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed

M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 etc all as specified.

All as per item No 6.00 above but in skirting including 10 mm thick backing coat of CM 1:4 all as specified and as directed.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc all as specified.

M&L for brick work with fly ash bricks,sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed.

All as per item No 11.00 above but 10 mm thick in CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC @ 3% by weight of cement in external surface of wall including scaffolding complete all as specified and directed.

All as per item No 11.00 above but 5 mm thick in ceiling surfaces in CM 1:4 complete.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty.

M&L for preparation of new plastered surface of wall and applying two coats of weather proof 100% acralic paint over a coat of primer.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash all as specified.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as specified.

All as per tem No 17.00 above but 20 mm dia GI tubing complete.

All as per tem No 17.00 above but 25 mm dia GI tubing complete.

S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed.

All as per tem No 20.00 above but 20 mm dia GI tubing complete.

All as per tem No 20.00 above but 25 mm dia GI tubing complete.

S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Fancy type CP Long shank bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair Fancy type CP stop cock /angular cock 15mm dia cast copper alloy, high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed.

S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed.complete all as specified and directed.

S&F 15 mm dia pillar tapes Fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F soap dish of vitreous China white, approximate size 160x 160x90mm .

S&F aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete.

Taking down PVC/CI pipe of size 100mm / 75 mm of any description all as specified and as directed by Engineer-in-Charge.

S&F CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm all as specified and as directed by Engineer-in-Charge.

All as per item No 32.00 above but 75mm dia in floor complete.

M&L for bends of any type radius diminishing pieces or tapes ( large bore measured) of 75mm dia bore with oval access doors etc.

S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc.

S&F CI cowls of 100mm all as specified and as directed..

S&F 100mm cast iron sanitary connection short connection pipe of length up to 300-450mm socket to fit WC outlet etc.

Dismantling of water tanks of exc 250 ltrs and not exceeding 500 ltrs in capacity.

S&F rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) hoisted and fixed in position all as specified.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the frame), removing to store and refixing in the same opening.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the frame).

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame).

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge .

S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge.

M&L Framed work such as grills, gratings, angle iron, purlin, wind tie etc. with end of bars shouldered and/or riveted or forged into spikes, framed guard bar , barred iron doors, railings, framed work/caging of water tank and similar works conforming to Fe 290, Gde -E-165 including hanging / locking arrangement as gate ,with hooks and pintle hinges, stops, hand-made sliding bolts including welding and fixing etc all as specified and directed.

M&L for marble tiles 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including cutting and polishing and nosing and polishing of the free or front edge of the slab in shelves, platform, window cills etc all as specified and directed in Engineer -in -Charge.

S&F in repairs vitreous china wash down water closet pan semi- pedestal pattern (Anglo- Indian Type) with trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubbit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete.

S&F in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed.

M&L for water proofing treatment in wc bathrooms by applying cement slurry mix with water froofing chemicals per manufacturers specification of approved make as under (a) All corner of WC, Bath shall be rounded by poviding fillet of dia 75mm (b) M&L for 15mm rendering on floor in CM 1:3 (c) M&L for allying cement slurry @0.488kg/sqm (d) M& L for bitumen blown 90/15 applied nol, two coat to concrete surface at the rate of 1.50 Kg / Sqm per coat all as directed by Engineer-In-Charge (e) incl demolition of lean concrete in sunken floor and refilling of lean concrete 1:5:10.

S&F in repairs Vitreous china wash basin with pedestal flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand.

S&F PVC water connection 600mm long to wash basin of 15mm dia incl CP nuts and washers all as specified and as direcetd by EIC.

S&F waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in Vitreous china urinal full stall type white (excl flushing cistern) flush pipe and waste pipe.

Cutting chases, in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of endings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repair bracket/holders suitable for drapery 28mm dia rods of Allishan-Ivory pearl interior series complete all as specified and as directed

S&F in repair 28 mm dia aluminium powder coated tubular drapery rod with and including side ball finials, matching rings made from high grade ABS plastics complete all as specified and as directed. Make:- Allishan-Ivory pearl interior series

M&L for Providing precast cement concrete 1:2:4, as in landings cover slabs (for man holes etc) chajjas , water through, mangers, shelves and similar articles with plain faces fair faces, incl chamfers, throating etc and setting in mortar 1 : 6 complete with joints to match complete all as specified and as directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrguted steel sheeting any guage thickness including Naital or similar pattern complete all as spd and directed.

M & L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:4 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed.

M&L Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in coping on walls and gaps between wall and sheets etc complete all as specified and directed.

M&L preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified.

S&F for MS framed works as in purlin, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried such as grills,gratings, etc. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L 0.80 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, in roofs, walls etc. with grade of zinc coating 275 and fixed with L-type or J-type with bitumen washers or cranked hook bolts in lieu of screws.

M & L 0.80 mm thick Galvanised, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and fixed with L-type or J-type with bitumen washers or cranked hook bolts in lieu of screws.

Taking down carefully point wiring of any type, size and description (light, fan, socket outlet etc.) including removal of battens, pipes, sockets, switches, ceiling roses, light fittings etc, complete and making good the disturbed surfaces to match with existing, all as specified and as directed.

Taking down main switches, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

Taking down old and unserviceable sub main wiring of any size and description and removable the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FR, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors .

M & L for concealed point wiring complete with PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 20 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for the following :-

(a) One light/fan point controlled by one one way switch

(b) One socket outlet 05 Amps on the same board

(c) One socket outlet 05 Amps on independent board

(d) One bell/buzzer point controlled by one bell push

(e) One light point controlled by two 2- way switches with cables 1.5 sqmm size.

All as per item No. 77.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered and directed .

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type all as directed.

S&F 3 pin 5 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) and all as specified and directed.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 2 in 1 ( 2pin & 3 pin) and all as specified and directed.

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified.

Supply and Fixing electric bell ding dong AC 230 volt single pole all as specified.

S&F fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep all as specified and directed.

S&F Switch flush type , 06 Amp single pole , two way.

M&L Rigid non-metallic 20 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete, all as specified.

M&L Mild steel box flush mounted 100mm x 100 mm x 100mm having holes for 20mm conduit entry including 2 pin TV socket outlet flush type duly marked with symbol of TV and 3 mm thick plastic laminated sheet cover complete for TV connection all as specified

Supply & fix sheet metal enclosures Double door for flush/surface mounting distribution board 8 way, factory made and tested complete, suitable for mounting MCBs with 200 Amps tinned copper bus bar, cable lugs complete.

S & F MCB SPN of rating 40 Amp, 240 Volt, 10 KA, 'C' series.

S & F MCB SP of rating, 10 to 16 Amp,240 volt, 10 KA 'B' Series.

S & F MCB SP of rating, 25 Amp,240 volt, 10 KA 'B' Series.

S&F 4 ft 18 watt Universal batten for T8 lamps and 1x18 watt (double side connection) Ultra bright glass LED Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders.

S&F 2 feet 09 W slim LED battern (cool day light) Basic all purpose surface and wall mounted with polycarbonate housing & integrated with electronic driver.

S&F IP-65 LED security light luminaire 1x30W , input volltage range 140-270 V at 50 Hz. The luminaire shall be protected against surges and transients >/=4KV with 3 Nos electronic control gears cover complete with all connections with accessories all as specified and directed by Engineer in Charge.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with 7 watt LED lamp.

Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed complete all as specified and directed for 10 sq. mm, 2 core nominal cross section in service connections.

Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr in depth for laying of pipes/cables etc. & getting out in soft/loose soil all as specified and directed.

Returning , filling in incluidng spreading , levelling, watering & well ramming in layers not exc. 25 cm in soft/loose soil all as specified and as directed.

Removing excavated materials at a distance not exc. 50 mtrs away and depositing at a level not exc. 1.5 mtrs above the starting point complete as directed by Engr in charge.

M&L for Sand cashioning to cable with dry fine sand intrenches 8 cmm below the cable and 15 cm above the cable after laying.

M&L for Bricks laid in trenches for cable protection well burnt sub class 'B' bricks complete all as specified.

Cutting bituminous road surface not exc 30 cm in width and getting out for taking up/laying pipe etc complete all as directed.

Demolition of concrete any description in ground/floor /paving not exc. 15 cm thickness ( below or above gl.).

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation of pole complete all as specified and directed.

M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate in coping of pole including necessary form work complete all as specified and directed.

M&L for GI tubes light grade galvanised with all fittings, laid in trenches of bore 50mm.

Maharaja Infrastructure

DMA PROJECTS