REPAIR/ REPLACEMENT OF INTERNAL ELECTRIC WIRING, CEILING FANS, EXHAUST FANS, GEYSERS, PERIMETER/STREET LIGHTS AND OTHER CONNECTED WORKS AT 29 RR AT PATTAN GARISSON UNDER AGE (I) CIF (K)

Amount

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.)

M& L in replacement of Point wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , Multistranded copper conductor cable as in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty for one light, fan, bell pioint controlled by one switch including sunken steel boxes of suitable size with 3mm thick plastic laminated bakelite sheet including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to distrub surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.

All as per Srl item No 2 here in before but wiring with FRLS , Multistranded copper conductor cables in PVC Casing and caping. Note : Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M& L in replacement of Point wiring for one 2 way light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

M& L in replacement of Point wiring for one socket outlet 5 Amp 3/5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

All as per Srl item No 5 here in before but for one 3 pin 5 amps socket outlet independent board in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

All as per Srl item No 5 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch.

All as per Srl item No 5 here in before but for one 3 pin 5 amps socket outlet on the same board in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

All as per Srl item No. 5 above but for one 15 Amp independent socket outlet point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly .

All as per Sl item No 9 here in before but for 15 Amp socket outlet in in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc. casing/caping

All as per Srl item No. 9 above but for metal plug top AC & Geyser point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly .

M & L for Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

M & L in replacement for Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

M&L for two way switch piano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed.

M&L in replacement for two way switch piano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed.

M&L for Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.

M&L in replacement for Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.

S&F for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F in replacement for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F for socket outlet 2 in 1, 3 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F in replacement of socket outlet 2 in 1, 3 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F for switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F in replacement of switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F for stepped type electronic mini fan regulator 100 watt rotary step all as specified and directed.

S&Fin replacement for stepped type electronic mini fan regulator 100 watt rotary step all as specified and directed.

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLS PVC insulated unsheathed ,FRLS , multistranded copper conductor cable 1100 volts grade in and including non metallic rigid PVC medium duty concealed conduit with wall thickness not less than 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No. 26.00 here-in-before but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No. 26.00 here-in-before but for 5 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No.26.00 here-in-before but for 15 Amps socket outlets point using 4.00 Sqmm FRLS PVC insulated multistranded copper conductor cable including 4.0 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth wire complete all as specified and directed.

M&L for one Module switch 1 way 10 Amps 240 volts all as specified and directed.

M&L in replacement for one Module switch 1 way 10 Amps 240 volts all as specified and directed.

M&L for one Module switch 1 way 16 Amps 240 volts all as specified and directed.

M&L in replacement for one Module switch 1 way 16 Amps 240 volts all as specified and directed.

M&L for Moduler bell push 6A, 240 volts 1 Module all as specified and directed.

M&L in replacement for Moduler bell push 6A, 240 volts 1 Module all as specified and directed.

M&L for Modular socket 6A, 240 volts 2/3 pin 2 Module all as specified and directed.

M&L in replacement for Modular socket 6A, 240 volts 2/3 pin 2 Module all as specified and directed.

M&L for Modular socket 6A/16A , 240 volts 2/3 pin 2 Module all as specified and directed.

M&L in replacement for Modular socket 6A/16A , 240 volts 2/3 pin 2 Module all as specified and directed.

M&L for Modular Fan step regulator 100W , 240 volts 1 Module all as specified and directed.

M&L in replacement for Modular Fan step regulator 100W , 240 volts 1 Module all as specified and directed.

M&L in replacement for ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M&Lin replacement for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M&L in replacement of LED bulb 12 watt 230 Volt all as specified and directed.

Supply & fix for wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply & fix in replacement of wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply and fixing for LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement of LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

S&F in replacement of LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

M&L for Bell, Ding Dong AC. 230 volts, single pole all as specified.

M&L for in replacement of Bell, Ding Dong AC. 230 volts, single pole all as specified.

M&L in replacement of sheet metal enclosure single pole and neutral 240 volt , 20 Amps with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs single door single pole and neutral with 200 amps rated bus bar of 2- way, 240 volts complete all as specified and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 4- way, 240 volts complete all as spd and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as spd and directed.

Supply and fixing in repair MCB single pole and neutral 40 Amps, 240 volts , C-series complete all as specified and directed.

Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts , C-series all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor. 2. Soil should be free from stone, boulders, aggregate, gravels etc

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and one run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in existing surface /recessed steel/ PVC conduit complete all as specified and directed by Engr-in-charge.,

S & F in replacement (including taking down old fitting) LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement octane LED panel of 15 W 6500K round slim,compact, aluminium die cast edge lit panel, recessed mounted round fixture with opal diffuser and separate electronic driver and low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output. Cat No- LHEBADP7IZ1W015 of Havells or equivalent in Bajaj/Crompton Greaves/Phillips

S&F in replacement octane LED panel of 15 W 6500K square slim,compact,auminum die cast edge lit panel, recessed mounted square fixture with opal diffuser and separate electronic driver and low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output. Cat No- LHEBAEP7IZ1W015 of Havells or equivalent in Bajaj/Crompton Greaves/Phillips

S&F in replacement of old unserviceable service cable size 10 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

S&F in replacement of old unserviceable service cable size 16 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

S&F "as in repair prewired" VTPN Distribution board with provision for MCCB as incommer 100 A 04 pole IP 54 ,04way(for incomming MCCB & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 100 Amps MCCB, 25 KA, 4 pole, as incomer and SP MCB's of cap 6-32amps as outgoing complete all as specified and as directed. Note: Rate of MCCBs and MCB,cutting,chasing,grouting in wall are included in above rate.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, canopy screws of suitable size and ensuring all blades screwed properly before refixing including replacement of PVC fan box round sheet as required on site and making electric connection with flexible copper conductor of size 3 core 0.50 Sqmm complete all as specified and directed. (Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately).

M & L for taking down, opening, dismantling and taking out burnt winding wire by cutting, cleaning slots and re-winding of AC ceiling fan motor 1400/1200mm sweep any make with super enameled colour copper winding wire of gauge 35/36 SWG including, sleeve work, varnishing with 1st class insulation paper with threading complete all as specified and directed. Note:- Total weight of winding wire should not be less than 200gm Per fan. Make of winding wire: RR/ BIC/ Devidyal/ Swastik or equivalent make as per command approved list.

Servicing of Exhaust fans of size upto 750 mm sweep including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws of suitable size and ensuring fan blades screwed properly before refixing and making electric connection with flexible copper conductor of size 3 core 0.50 Sqmm complete all as specified and directed. (Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately).

M & L for taking down, opening, dismantling and taking out burnt winding wire by cutting, cleaning slots and re-winding of exhaust fan/wall mounted fan motor upto 450mm sweep with super enameled copper winding wire of gauge as per existing and approved from engr-in-charge before fitted including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation varnish, threading complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable gun metal bush of ceiling fan of size 1200/1400mm sweep as per existing size complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable capacitor AC 440 volts 2.5 mfd with copper wire terminal including PVC clamp complete all as specified and directed.

All as per Srl item No 73 above but of rating 3.15mfd.

Supply & fixing only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable shackle assembly kit (rubber real -01, MS split clamp -02 Nos, nut ,check nut,spring washer, bolt not less tha 6.0mm dia & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.

Supply & fixing only in replacement of old unserviceable ceiling fan blades made of MS sheet duly powder coated of thickness not less than 1.0mm suitable for 1400/1200mm sweep ceiling fan complete all as specified & directed.

Supply and fixing down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with spray painted two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing in replacement PVC canopy for ceiling fan of suitable size complete all as specified and directed.

S&F in replacement of Metallic casing (upper and lower) for housing ceiling fan motor of size required at site for ceiling fan 1200mm/1400mm sweep made out of powder coated CRCA sheet complete all as specified and directed.

Supply and Fixing in replacement cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm, 100 volts grade, complete all as specified.

M & L for Removing old paint by scraping with sand paper including washing and filling cavities with filler and applying two coats of painting with existing colour to ceiling fan 1200-1400mm sweep at site with heat resistant synthetic enamel paint by spray painting on the ceiling fans complete all as specified and directed by Engr-in-Charge.

M & L for Removing old paint by scraping with sand paper including washing and filling cavities with filler and applying two coats of painting with existing colour to Exhuast fan upto 750mm sweep alongwith connected part at site with heat resistant synthetic enamel paint by spray painting incl on the Exhuast fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of existing unserviceable Metallic shutter of exhaust fan as per existing size & shape complete all as specified and directed.

Supply and fixing in replacement of existing unserviceable PVC fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

M & L for lathe work of Ceiling Fan/ Exhaust fan of any capacity and make incl re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable outer PVC body of exhuast fan alongwith shutter cover plate of size upto 300mm including all fitments such screws, gasket cover canopy of both side etc complete

S & F as in replacement of motor of Exhuast fan upto 450mm sweep Metallic body 230 volts 50Hz 900 RPM (ISI Marked) with copper winding complete all specified and directed.

M&L for replacement of old unserviceable outer Metallic body of exhuast fan alongwith connected support arm and body frame of size upto 450mm including all fitments such screws, gasket cover canopy of both side etc complete

Supply and fix in replacement of syphon assembly of 6 hole/09 holes as per site requirement made out of brass of 25 ltr capacity (ISI marked) including necessary studs screws and rubber gasket/washers complete all as spd and directed.

Supply and fix in replacement of thermostat switch (ISI marked) suitable for geyser 25 ltr to 50 ltr, AC 230 volt adjustable range from 0-90 degree Celsius as per exisiting size, make and shape complete all as specified and directed.

Supply and fix in replacement of heating element titanium coated of rating 1.5/2 KW suitable for geyser any type and make as per existing and site requirement incl gasket washer (ISI marked) geyser element AC 230 volt complete all as specified and directed.

S & F in replacment of geyser connections pipes for hot & cold water supply made out of stainless steel wire braided connector with crome finish heavy duty nuts of 15 mm dia size with suitable length and as per existing site condition incl taking down of old UNSV pipes complete all as specified and directed.

Supply and fixing in replacement of cable flexible PVC insulated, PVC sheathed, copper conductor, 3 core 2.5 sqmm (ISI marked ) 1100 volts grade.

S&F in replacement of 5 Amp plug top, 3 pin complete all as specified and directed.

S&F in replacement of 15 Amp plug top, 3 pin complete all as specified and directed.

S & F LED street light fitting of 35 watts, 5700k, IP 66 IK-07 rating power factor >0.95, IK-08 having 120 lumen/watt efficacy with individual lens cover on each LED, rendering index > 70, 4 KV integrated surge protection, external 10 KV surge protection potted driver, toughened glass cover in high pressure die-cast powder coated aluminium housing and making connection using 3 core flexible copper cable complete all as specified and directed by Engineer -in-charge.

All as per srl item No.97 above but 60 watt

All as per srl item No.97 above but 70 watt

All as per srl item No.97 above but LED flood light 120 watt, 6000K

Note :- An amount of Rs. Rs 26,879.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S A Q ENTERPRISES (BID ID -3506046)

M/S RATHER STEEL WORKS (BID ID -3499226)

M/S ALTAF HUSSAIN KHUROO (BID ID -3504796)

M/S V L ENTERPRISES (BID ID -3505325)

M/S M.S TANVEER ENTERPRISES (BID ID -3499036)