Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC 77 KAILASH PURI BIKANER RAJ C 15 SWC JAIPUR | BIKANER | RAJASTHAN | 331801 | L1 | Accepted-AOC M/S Solanki General Suppliers is the Lowest Bidder, hence accepted | |
| 2 | L2₹20.9 L+₹1.0 L (5.18%)Rejected-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLEGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹21.3 L+₹1.5 L (7.63%)Rejected-Finance | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹21.4 L+₹1.6 L (8.04%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹22.5 L+₹2.6 L (13.3%)Rejected-Finance | L5 | Rejected-Finance Other Than L1 |
| Sl No | Description | Qty | Unit | KRISHNA CONSTRUCTION COMPANY L4 | M/S SOLANKI GENERAL SUPPLIERS L1 | chhaba construction L5 | M/S HARIOM CONSTRUCTION COMPANY L2 | Akarsha Enterprises L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed. | 262.8 | CUBIC METRE | 140 ₹36,792 | 107 ₹28,119.6 Lowest | 200 ₹52,560 | 220 ₹57,816 | 300 ₹78,840 |
| 2.00 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed. | 231.19 | CUBIC METRE | 50 ₹11,559.5 | 27 ₹6,242.13 | 60 ₹13,871.4 | 23 ₹5,317.37 Lowest | 100 ₹23,119 |
| 3.00 | Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 31.61 | CUBIC METRE | 50 ₹1,580.5 | 67 ₹2,117.87 | 60 ₹1,896.6 | 23 ₹727.03 Lowest | 50 ₹1,580.5 |
| 4.00 | Taking up or down 100mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed.
Note :- Excavation and earth work shall be measured and paid for separately. | 60 | RUNNING METRE | 20 ₹1,200 | 27 ₹1,620 | 30 ₹1,800 | 13 ₹780 Lowest | 70 ₹4,200 |
| 5.00 | Taking up or down 150 mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed.
Note :- Excavation and earth work shall be measured and paid for separately | 60 | RUNNING METRE | 30 ₹1,800 | 37 ₹2,220 | 40 ₹2,400 | 23 ₹1,380 Lowest | 80 ₹4,800 |
| 6.00 | Taking up or down 200mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed.
Note :- Excavation and earth work shall be measured and paid for separately | 60 | RUNNING METRE | 40 ₹2,400 | 47 ₹2,820 | 60 ₹3,600 | 23 ₹1,380 Lowest | 90 ₹5,400 |
| 7.00 | Labour for laying only in trenches old serviceable 100mm bore of DI pipe any class (obtained from item No. 4.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed.
Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after.
(ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after. | 60 | RUNNING METRE | 50 ₹3,000 | 47 ₹2,820 | 40 ₹2,400 Lowest | 83 ₹4,980 | 60 ₹3,600 |
| 8.00 | Labour for laying only in trenches old serviceable 150mm bore of DI pipe any class (obtained from item No. 5.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed.
Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after.
(ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after. | 60 | RUNNING METRE | 50 ₹3,000 Lowest | 57 ₹3,420 | 60 ₹3,600 | 93 ₹5,580 | 70 ₹4,200 |
| 9.00 | Labour for laying only in trenches old serviceable 200mm bore of DI pipe any class (obtained from item No. 6.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed.
Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after.
(ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after. | 60 | RUNNING METRE | 80 ₹4,800 | 67 ₹4,020 Lowest | 80 ₹4,800 | 103 ₹6,180 | 80 ₹4,800 |
| 10.00 | Taking up or down 25 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed.
Note :-Excavation and earth work shall be measured and paid separately. | 200 | RUNNING METRE | 15 ₹3,000 | 17 ₹3,400 | 10 ₹2,000 Lowest | 13 ₹2,600 | 50 ₹10,000 |
Tender Value
₹25.0 L
EMD Value
₹49,970
Closing Date
13 Aug 2025, 6:00 pmClosed
Sh Nitish Pathak, EE
GE (AF) Phalodi
REPAIR/ MAINTENANCE TO EXTERNAL WATER SUPPLY SYSTEM AND CONNECTED WORK IN DOMESTIC AREA AT AF STN PHALODI
2025_MES_717869_2
8725/A/E8
Open Tender
Civil Works
Item Rate
180 days
Air Force Stn Phalodi
As per tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Phalodi
₹49,970
Yes
30 Sept 2025
23 Jul 2025
20 Aug 2025
23 Jul 2025
13 Aug 2025
31 Jul 2025
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed.
Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Taking up or down 100mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately.
Taking up or down 150 mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately
Taking up or down 200mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in storeyard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed. Note :- Excavation and earth work shall be measured and paid for separately
Labour for laying only in trenches old serviceable 100mm bore of DI pipe any class (obtained from item No. 4.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed. Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after. (ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after.
Labour for laying only in trenches old serviceable 150mm bore of DI pipe any class (obtained from item No. 5.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed. Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after. (ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after.
Labour for laying only in trenches old serviceable 200mm bore of DI pipe any class (obtained from item No. 6.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed. Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after. (ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after.
Taking up or down 25 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed. Note :-Excavation and earth work shall be measured and paid separately.
Taking up or down 40 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed. Note :-Excavation and earth work shall be measured and paid separately.
Taking up or down 50 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed. Note :-Excavation and earth work shall be measured and paid separately.
Taking up or down 80 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed. Note :-Excavation and earth work shall be measured and paid separately.
Supply and laying in trenches 25 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed.
Supply and laying in trenches 40 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed.
Supply and laying in trenches 50 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed.
Supply and laying in trenches 80 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed.
Supply and Fix in repair in OH tanks Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with required size reducer of pipe bore size 25 mm complete all as specified and directed.
M& L to rectify the leakage of DI/CI pipe of size 150 to 250mm bore spigot and socked end including necessary excavation, returning filling and all required material to rectifiy the leakage complete all as specified & directed.
M& L to rectify the leakage of CI/DI pipe of size 80 to 100mm bore spigot and socked end including necessary excavation, returning filling and all required material to rectifiy the leakage complete all as specified & directed.
M& L to rectify the leakage of galvanize iron pipe of size 25 to 80 mm bore including necessary excavation, returning filling and all required material to rectifiy the leakage complete all as specified & directed.
M& L for to rectify the leakage of CI/DI pipe of size 150 to 250 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of pits complete all as specified & directed.
M& L for to rectify the leakage of CI/DI pipe of size 80 to 100 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of valve pits complete all as specified & directed.
M & L in replacement DI fitting upto 150mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc. suitable for spigot and socketed pipes, conforming to IS-1536-2001 complete all as specified and directed.
M & L in replacement DI fitting upto 200mm to 300 mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc. suitable for spigot and socketed pipes, conforming to IS-1536-2001 complete all as specified and directed.
M & L for taking down old unserviceable 250 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. nuts, bolts etc. complete all as specified and directed.
M & L for taking down old unserviceable/rusted 200 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed.
M & L for taking down old unserviceable/rusted 150 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed.
M & L for taking down old unserviceable/rusted 100 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed.
Supply, install, connecting and testing of 250 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type IS- 14846:2000 marked including jointing materials i.e. rubber gaskets, nuts, bolts etc including dismantling of old sluice valve complete all as specified and directed.
Supply, install, connecting and testing of 200 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type IS- 14846:2000 marked including jointing materials i.e. rubber gaskets, nuts, bolts etc including dismantling of old sluice valve complete all as specified and directed.
Supply, install, connecting and testing of 150 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type IS- 14846:2000 marked including jointing materials i.e. rubber gaskets, nuts, bolts etc including dismantling of old sluice valve complete all as specified and directed.
Supply, install, connecting and testing of 100 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type IS- 14846:2000 marked including jointing materials i.e. rubber gaskets, nuts, bolts etc including dismantling of old sluice valve complete all as specified and directed.
M & L for replacement in repair Rubber gasket joint in CI/ DI Spigot and socket pipes and fittings of 250 to 150 mm bore CI/ DI pipe complete all as specified and directed.
M & L for replacement in repair Rubber gasket joint in CI/ DI Spigot and socket pipes and fittings of 100 to 80 mm bore CI/ DI pipe complete all as specified and directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for100 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & directed.
S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 250 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & as directed.
Supply, install, connecting and testing in replacement of ball/ Butterfly type, non return valve size 80 mm bore, (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed.
Supply, install, connecting and testing in replacement of ball/ Butterfly type, non return valve size 100 mm bore, (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed.
Taking up or down 20/25 mm bore CPVC pipes and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed. Note :-Excavation and earth work shall be measured and paid separately.
Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified & directed.
Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified & directed.
S & F in renewal for gun metal, globe or gate valves size 80 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in renewal for gun metal, globe or gate valves size 50 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in renewal for gun metal, globe or gate valves size 40 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in renewal for gun metal, globe or gate valves size 25 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply, install, connecting and testing in replacement of Air release valve, 80mm bore, Flanged End Heavy, double ball CI body confirming to IS-14845 complete all as specified and directed.
Supply, install, connecting and testing in replacement of Air release valve, 100mm bore, Flanged End Heavy, double ball CI body confirming to IS-14845 complete all as specified and directed.
Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 80mm bore, confirming to IS-4038 complete all as specified and directed.
Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 100mm bore, confirming to IS-4038 complete all as specified and directed.
Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 150mm bore, confirming to IS-4038 complete all as specified and directed.
M & L in repair of Over Head filling Point GI delivery piping at domestic location SWTs by giving reinforcement with GI pipes/ Angles through fasteners , welding and painting of pipe complete as specified and directed.
M & L in repair of Over Head filling Point delivery piping at strategic location SWTs by fixing flexible canvas piping @ 100mm dia and 1500 mm length complete as specified and directed.
Material and labour for construction of valve pit chamber in stone masonry built in CM (1:6) of size 1200mm x 1200mm x1000mm (internal dimension) with precast cement concrete block of PCC (1:4:8) type D-2 using 40mm graded stone aggregate and 15mm thick rendering in CM 1:6 on internal and exposed external surfaces including 40 x 40 x6 mm mild steel angle iron frame and 3mm thick MS sheet cover with locking arrangement and 1No. 50mm size 4 lever lock with triplicate keys including painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer including dismantling of old valve pit chamber complete all as specified and directed.
Supply and fixing booster pump for increasing water pressure 1HP single phase 240 volt complete all as specified & directed.
Supply and fixing self priming monoblock pump of capacity 1HP single phase 240 volt complete all as specified & directed.
Supply and fixing self priming monoblock pump of capacity 1/2 HP single phase 240 volt complete all as specified & directed.
M & L for repair and servicing, testing of Chemical dosing (Metering) Pump electromagnet type with suction & discharge tubing, Spring loaded anti siphon valve, foot valve etc complete all as specified and directed.
Supply and fixing in renewal of Water level indicator/gauge mechanical type with top mounted float and dial for under ground sump approx depth is up to 7.0 meters maximum. Consists of Float , SS wire rope, Rope Drum, dust proof weather proof IP66 enclosed Constant Torque Spring Mechanism, Rope protection pipe, dial Indicator should be white powder coated with bright coloured graduations in IP66 standard as per existing make and model complete all as specified and directed.
Removing vegetations/bushes/foreign materials etc around pump houses etc throwing the wastage at a distance not less than 500 mtr as and where complete all as specified and directed . Note -T&P and safety equipment required for the work is to be provided by the contractor.
Supply only Ferric alum grade IV as per IS - 299/2012 complete all as specified and directed .
Supply only Calcium hypochlorite granules(65 to 70%) chloine content complete all as specified & directed.
Supply and Fix in renewal GI Tee size 80 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Tee size 50 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Tee size 25 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Tee size 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Elbow size 80 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Elbow size 50 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Elbow size 25 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Elbow size 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI socket size 80 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI socket size 50 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI socket size 25 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI socket size 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Union size 50 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Union size 25 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Union size 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Reducer size 50 to 25 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Reducer size 25 to 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Reducer size 40 to 20 mm bore size ISI marked complete all as specified and directed.
Supply and Fix in renewal GI Reducer size 40 to 25 mm bore size ISI marked complete all as specified and directed.
M/S HARIOM CONSTRUCTION COMPANY (BID ID -3392618)
Akarsha Enterprises (BID ID -3379411)
KRISHNA CONSTRUCTION COMPANY (BID ID -3380292)
chhaba construction (BID ID -3391824)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .