07 Webel IDM BN4 HighMast 20 21 46

Amount

Supply, erection, testing & commisioning of 16 M Polygonal High Mast lighting system complete with its all fittings & accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875, Plate thickness of 3mm. It shall also include accessories for 'high mast including head frame, steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, driving power tool, pully assembly, Galvanised Lantern carriage arrangement suitable for 8 luminaires 'symmetrically & its control gear boxes with 5Cx2.5 sq. mm. Cu wiring, lightning protection finial, earthing with 10SWG GI wires, painting, elmex connector and all other accessories complete as required. The mast shall have an integral powertool installed inside the base compartment for its operation. The rate shall also be inclusive of Base Plate of adequate thickness, foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates.

Supply, installation, testing & commisioning of LED floodlight luminaire including driver and all other acessaries, IP - 66 protection, (Model- Bajaj Make BJFL 200W LED I or approved equivalent).

Supply & installation of LED aviation obstruction lights

Supply, installation, testing & commissioning of control panel made 14 SWG CRCA sheet & housing 6-32 A TPN MCB incomer, double dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and suitable control circuit for the power tool motor. The rate shall be inclusive of necessary foundation civil works.

Supply & erection of design & casting of suitable R.C.C foundation with suitable grade concrete considering SBC of soil as per the direction of EIC.

Supply & installation of pipe earthing with 40mm dia Gl pipe & 3.0mtr long with charcoal and salt including earth pit. The connections shall be made with 25X5mm Gl strip as requied.

Supplying, laying, testing and commissioning of 4C X 10 sq.mm A2XFY insulated PVC sheathed, Al conductor steel armourd 1.1 KV grade cable. Cables shall be laid on wall/surface/tray/through floor/underground. For cables laid underground - the rate shall include earth excavation, providing brick and sand protection, refilling, compacting etc.

Compression Glands: Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4Core- upto 10 sqmm

Finishing cable ends: Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 10 sqmm cable

SILICON SOFTWARE

Abdul Electricals and Infrastructures Pvt Ltd

The Suburban Electric Co.