REPAIR TO VARIOUS TYPE OF DOORS WINDOWS VENTILATORS CUPBOARDS AND OTHER JOINERY RELATED BR WKS AT ZONE I AT LANSDOWNE

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each. complete at all heights as per direction of Engineer-in-charge.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each..complete at all heights as per direction of Engineer-in-charge.

Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.00 Sqm.complete at all heights as per direction of Engineer-in-charge.

Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm. complete at all heights as per direction of Engineer-in-charge..

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each .. complete at all heights as per direction of Engineer-in-charge..

S&F 35mm thick molded WPC factory made 1005 galezed (wire mesh ) door shutter (confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, termite proof, fire retardent and having screw holding capasity. .Complete all as specified and directed by Engineer in Charge .

S & F 30 mm thick molded WPC factory made 1005 solid door shutter (confirming as per IS :4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600 kg / cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

S&F 100mm x 65mm single rebated facotry made 100% solid WPC Door frame made from 100% LEAD Free (Single extruded process) material with density 780 kg/cum and manufactured by an ISO : 9001-2015 certified company , all as per specification. The door frame should be water proof, termite proof, fire retardent and having excellent screw holding capacity. complete all as specified and directed.

S & F 125 mm x 65 mm double rebate factory made 100 % solid WPC door frame made from 100 % lead free( single extruted process) material with density 780 kg/cbm and manufactured by an ISO 9001-2016 certified compony all as per spesification.The door from should be water proof, termite proof,fire resistant and having exellent screw holding capacity.complete all as specified and directed.

S & F stainless steel non megnetic Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

S & F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified

S & F Aluminium handles cast type anodised of size 125 mm long ISI marked complete all as specified.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.

M&L Preparation of new plastered or unplastered surfaces of walls and applying two coat of distemper oil emulision (O.B.D) white or tinted over and incl of one coat of primer on wall surface.complete all as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer.complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Taking up or down steel tubing 20mmdia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

S & F 18mm thick , prelaminated Medium Density (MDF), interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber / steel frame work as in CB shutter, shelves etc with PVC lipping on all exposed edges of same texture and shade. Stainless steel cleat of suitable size will be used to fix the shelves of CB and cabinets complete all as specified and directed.

S & F 18mm thick PVC solid both side prelim celuka cup boards, drawer etc with shelf and shutter including lipping to edges of exposed surface including provision of fixing arrangement complete all as specified and directed.

S & F 75 mm hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw complete all as specified and directed

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 30 mm complete all as specified and directed.

S&F Aluminium handles,cast type, anodised 100 mm long, all as specified and directed.

S&F in repairs Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staplest complete all as specified and directed.

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work. complete all as specified and directed.

M&L Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.complete all as specified and directed.

M&L Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm.complete all as specified and directed.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed.

S&F in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0.complete all as specified and directed.

S&F for 25mm dia curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F for fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as direct

S&F 04 mm thick glass sheet , ordinary quality and glazing with oil putty/wooden beads not exceeding 0.5 square metre in each pane complete all as specified.

S&F in welding work in windows ventilators incl providing handle, hinges etc wherver required with easing hinges, handles and making smooth for working complete all as specified and directed.

S&F in reapir door closer hydraulically regulated, designation No 1, universal type, aluminium (Die cast body) sutable for door shutters complete all as specified and directed

M&L Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle bar complete confirming to Fe-410 -O etc complete all as specified and directed.

Supply & Fixing mild steel flat iron as in hold fast,wind ties over roof covering using steel of grade Fe-310-O or Fe-410-O including necessary drilling holes etc and similar works complete all as specified.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc all complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in bed block for insertion of hold fast incl necessary form work etc complete all as specified and directed.

S&F Aluminium door seal upto 1200 mm long on bottom of door, fixed in repairs. complete all as specified and directed

S&F Magic eye for main door , fixed in repairs, all as specified and directed by Engr-in-Charge complete all as specified and directed.

ANKIT KUMAR

M/S Balaji Builders