Rate contract for SITC of Electrification Work with Buyback at Various STP/SPS Premises of A.M.C.

3 submission of Volume-I (Technical Bid “Asst.Manager (PWA)”2nd Floor, Sardar Patel

only) of Tender in Physical form Bhavan, Dana pith, Ahmedabad Municipal

Corporation, Ahmedabad–380001 Gujarat, India

Up to 24.03.2026 up to 4:00 p.m. onwards

Online Opening:-At the Office of Addl.Chief

Tender Vol-I (Technical Bid only) Engineer (S.O.E.& M ), STP Department,5th Floor

4 Opening Date-Time and Place “C”-Block, Sardar Patel Bhavan, Danapith

Ahmedabad-380 001, Gujarat, India. Physical

Opening :-At the Office of “Asst.Manager

(PWA)”2nd Floor, Sardar Patel Bhavan,Dana pith,

Ahmedabad Municipal Corporation, Ahmedabad–

380001 Gujarat,India or at the above said office

SCHEDULE OF QUANTITIES

PRICE QUOTATION SHEET

Name of Work: Rate contract for SITC of Electrification Work with Buyback at Various STP/SPS Premises of A.M.C.

Earnest Money: - Rs.1,500/-

Date of Opening of Tender :- 24.03.2026

Estimated Price:- Rs.30,00,000/-

1) I / We am / are willing to carry out work at % above / below percent (in figures) (should be written in figures and words) of the

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. (In figures)

Rupees (in words)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Add % above Rs. Deduct % below Rs.

Total Rs. Net Rs.

In words In words

Company’s seal:

SUMMARY FOR PRICE BID FOR Rate contract for SITC of Electrification Work with Buyback at Various

STP/SPS Premises of A.M.C.

SUMMARY OF WORK

Sr.No. DESCRIPTION Amount in RS.

A Rate contract for SITC of Electrification Work with Buyback at Various

STP/SPS Premises of A.M.C.

TOTAL SITC WORK AMOUNT WITHOUT GST IN RS.

Rate contract for SITC of Electrification Work with Buyback at STP/SPS of AMC. (Within Limit of Rs.30 lakh )

DESCRIPTION Qty without without

GST in RS. GST in Rs.

INTERNAL WIRING

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5

sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI marked flush type

switch / bell push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose / H.D.Connector as

(e) in existing pipe erected flushed on wall/ceiling

Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of

1.1.2 A pipe erected complete with ISI marked 3 / 5 Pin socket

2 and tissino type switch erected with earth continuity

connection erected on Metal / PVC/Wooden box covered

with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated

(e) in existing pipe erected flushed on wall/ceiling

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu.

Mains from mcb d b boards.

(e) in existing pipe erected flushed on wall/ceiling

Point wiring for looped PLUG with tissino type single

pole ISI marked Switch and Socket erected with necessary

1.1.3 connections erected on wooden/ Metal/ PVC Box

4 covered with 3mm thick PC (Polycarbonet)/ Acrylic sheet

for open/ concealed wiring for for

[A] For 6 Amp Pt 1 66.00

[ B ] For 16 Amp Pt 1 162.00

Point wiring for Tissino / Modular secondary light point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires, in below type of pipe to be

erected complete with earth continuity and necessary

connection with primary light with accessories erected on

Metal / PVC / wooden box covered with 3 mm thick

5 1-1-4. PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(e) in existing pipe erected flushed on wall/ceiling

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

1.2.1 continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

6 covered with textured/metallic/ white front plate

modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 1 372.00

Point wiring for FAN with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

1.2.2 Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /

7 flushed on wall/ceiling com

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt 1 517.00

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

8 plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.

For 6A Plug and 6A switch with with 2-1.5 sq.mm Cu.

Wire from nearby switch board/mcb db board.

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 1 385.00

1.2.3 [ For 16A Plug and 16A switch with 2-2.5 sq.mm Cu.

II ] Wirefrom nearby switch board/mcb db board.

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 1 526.00

1.2.3 [ For 16A Plug and 16 A switch with 2-4 sq.mm Cu. Wire

III ] (green )earthing wire from mcb db board.

10 (e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 1 662.00

Point wiring for Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic box, single

11 1.2.4 mounting base frame covered with textured / metallic Pt. 1 255.00

front plate modules erected on / in wall / ceiling with

following type accessorie Cat-III

Point wiring for Two Way Controlled Light Point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

12 1-2-5. base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling

rose or H.D.Connector as directed.

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 1 475.00

Providing following type of Modular Type

Accessories mounted with pvc / metallic box, single

1.2.6 mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection.

As desired by Engineer In charge

(1). One No.SP 6 Amp.

(2). One No.5 pin Plug.

(3A)Two Pin/RJ-11 Telephone Socket-[A] For One

(3B) Two Pin/RJ-11 Telephone Socket-[B] For Two

13 (4)TV Co-axial Socket outlet -

(5) Electronic hum free four or more steps EME fan

regulator cat.III

(7) Blank Plate Single -Cat.III Ea. 1 25.00

(8)Modem Jack for Computer Open RJ-45-Cat.III Ea. 1 159.00

(21) Foot light as per colour requirement with concealed

box modular accessories,acrylic glass cover with suitable

LED 2-9watt with all accessories as per following module

(a) Two modules Cat-III Ea. 1 313.00

(b) Four modules Cat-III Ea. 1 490.00

(c) Six modules Cat-III Ea. 1 599.00

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

1.3.2 on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following

Supplying and laying UPVC mini trunking (PVC

casing & capping)having double locking arrangement with

grooves ,trunking of size not below 12.5mm in height as

per IS with accessories of PVC/Resin polypropylene not

below 1.8mm thick duly sealed joint and errected on

wall/ceiling of following size cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free & flame proof confirming BS

.All necessary accessories and measuring of following

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring

of following sizes

16 (1) 75 mm x 50 mm trunking 1

(2) 100 mm x 50 mm trunking 1

(3) 50 mm x 50 mm trunking 1

(4)100 mm x 50 mm trunking with TWIN compartment Mtr

With clip in divider .

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

1.4.1 type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of

17 (e) in existing pipe

(a) 2 wire 1.5 sq. mm Mtr

(b) 2 wire 2.5 sq. mm Mtr

(c) 3 wire 1.5 sq. mm Mtr

(d) 3 wire 2.5 sq. mm Mtr

(e) 4 wire 1.5 sq. mm Mtr

(f) 4 wire 2.5 sq. mm Mtr

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type

1.4.2 of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of

green colour for

(e) in existing pipe

(a) 2 wire 4 sq. mm 1

(b) 2 wire 6 sq. mm 1

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

1-4-4 IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm 1

(g) One wire 16.00 sq. mm 1

(h) One wire 25.00 sq. mm 1

(i) One wire 35.00 sq. mm 1

(j) One wire 50.00 sq. mm 1

(k) One wire 70.00 sq. mm 1

(l) One wire 95.00 sq. mm 1

(m) One wire 120.00 sq. mm 1

(n) One wire 150.00 sq. mm 1

Supplying and erecting Flexible PVC insulated multi strand

1-4-5 multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.

(a) 0.75 Sq.mm twin twisted 1

(b) 1.00 Sq.mm twin twisted 1

(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed 1

(d) 1.50 Sq.mm 2 core round PVC sheathed 1

(e) 1.50 Sq.mm 3 core round PVC sheathed 1

(f) 1.50 Sq.mm 4 core round PVC sheathed 1

(g) 2.50 Sq.mm 2 core round PVC sheathed 1

(h) 2.50 Sq.mm 3 core round PVC sheathed 1

(i) 2.50 Sq.mm 4 core round PVC sheathed 1

(j) 4.00 Sq.mm 3 core round PVC sheathed 1

(k) 4.00Sq.mm 4 core round PVC sheathed 1

Providing & Erecting approved make following size of TV

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation.

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

1-4-7 FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With

necessary connections.

[A] Conductor Size 0.5 mm

(2) Two Pairs 1

(3) Three Pairs 1

(4) Five Pairs 1

(5) Ten Pairs 1

(6) Twenty Pairs 1

(b) Armoured [Jelly Filled]

(1) Ten Pairs 1

(2) Twenty Pairs 1

(3) Fifty Pairs 1

(4) One Hundred Pairs 1

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction

(C) CAT - 6 Mtr 1 47.00

Providing & erecting main Distribution (MDF) indoor type,

1-4-9 back mounted frame as per DoT standard approved with

(a) Suitable for 10 pair Ea. 1 985.00

24 (b) Suitable for 20 pair Ea. 1 1355.00

(c) Suitable for 50 pair Ea. 1 1730.00

(d) Suitable for 100 pair Ea. 1 3409.00

(e) Suitable for 200 pair Ea. 1 6352.00

Providing and erecting following shockproof tissino type

accessories erected on 3mm sheet

(14 ) Electronic Hum free EME socket type Steps Fan

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

1-6-2 covered with textured/metallic /white front

(B) plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Cat. III Ea. 1 1122.00

Supplying & erecting Approved make call bell indicator

with buzzing sound and Red light indicating lamp with Red

light button to attend the call suitable for 240 v 50 c/s

supply to be erected.

Decorative call bell Ting-tong box type 250 volts complete

Supplying & erecting Electronic Type Cordless Call Bell

erected on PVC/Metal board having portable bell push

working on D.C. & bell on 230V A.C. supply with cells /

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of co-extruded polycarbonate channel with diffuser part

in needed opal finish with company mark/name 160V to

270V, Power Factor more than 0.9, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

30 LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Cat-lll Ea. 1 164.00

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Cat-lll Ea. 1 293.00

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

2-15-2 hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable

31 (a) 2 to 3 watts

Cat-III E.a. 1 69.00

(b) 5 to 8 watts

Cat-III E.a. 1 111.00

(iii) 10 to 15 watts

Cat-III E.a. 1 187.00

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Cat-lll E.a. 1 218.00

(ii) 11-15 watts, Surge-2 KV

Cat-lll E.a. 1 423.00

(iii) 16-20 watts, Surge-2 KV

Cat-lll E.a. 1 584.00

(iv) 22-24 watts, Surge-2 KV

Cat-lll E.a. 1 751.00

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(i)up to 8 Watts,4" x 4", Surge-2 KV E.a. 1 271.00

(ii) 10 watts, 4" x 4", Surge-2 KV E.a. 1 347.00

(iii) 12-15 watts, 6" x 6", Surge-2 KV E.a. 1 462.00

(iv) 18 to 20 watts, 8" x 8", Surge- 2 KV E.a. 1 607.00

(v) 24 watts, 12" x 12" , Surge-2 KV E.a. 1 717.00

(vi) 36 watts, 24" x 24", Surge- 2KV E.a. 1 1777.00

(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV E.a. 1 2071.00

(D) LED Strip Light

(i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with

non integral suitable Driver complete

Cat-lll 1 134.00

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65)

with non integral suitable Driver complete

Cat-lll 1 218.00

(F) Spot Light 425 Lumens, Surge-2KV

(i) 3 to 7 Watts

Cat-lll Ea. 1 805.00

(ii) 8 to 11 Watts

Cat-lll Ea. 1 1354.00

(G) Step Light having Aluminium die cast and ABS Plastic

(i) 5 watts, Direct/Indirect luminaire

Cat-lll Ea. 1 568.00

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

2-16-2 company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

33 description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

B ,Light must have 440VAC line supply with over-voltage

(iv) above 90 to 120 watts

Cat-lll Ea. 1 7195.00

(v) above 120 to 160 watts

Cat-lll Ea. 1 8370.00

(vi) above 160 to 200 watts

Cat-lll Ea. 1 9552.00

Pproviding and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal current rating up to 25 A

3-4-1. to 100A. with Fixed thermal & magnetic release suitable

34 to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 6112.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having normal current rating 125A.

3-4-2. with Fixed thermal & magnetic release suitable to work

35 on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 7976.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal current rating

3-4-3. 200A.with variable Thermal & magnetic release suitable

36 to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III Ea. 1 16061.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 35 KA. and above at 415 V . having normal current

3-4-4. rating 250A. with variable thermal & magnetic release

37 suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 20739.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 50 KA and above at 415 V having Normal current

3-4-5. rating 400A. with variable Thermal & magnetic release

38 suitable to work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 24979.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 50 K.A. and above at 415 V having normal current

3-4-6. rating up to 630A. with variable thermal & magnetic

39 release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing

ICS=100% of ICU only Cat III Ea. 1 27895.00

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 50 K.A. and above at 415 V having normal current

rating 800A.with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S.housing.

ICS=100% of ICU only Cat III Ea. 1 30429.00

Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

41 erected in existing M.S.housing..

Providing and erecting following additional parts for panel

(A)Extended operating rotary handle with pad lock with

three position trip,off,on suitable for 25A to 250 A panel Ea. 1

mounting cat-III

(B)Extended operating rotary handle with pad lock with

three position trip,off,on suitable for 400A to 630 A panel Ea. 1

mounting cat-III

Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary

busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulation

tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required

size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity 1

(B) Suitable for 200 Amp. Capacity 1

(C) Suitable for 300 Amp. capacity 1

(D) Suitable for 400 Amp. capacity 1

providing and erecting Miniature circuit breaker single

3-10- pole 6A to 25A suitable to operate on 240 V A.C. system

44 1.(B) and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III Ea. 1 111.00

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

45 capacity & confirms to IS : 8828 in existing box having

following capacity

(A) 6 to 32 Amp.

Cat.III Ea. 1 297.00

Cat.III Ea. 1 327.00

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

(a) 6 to 32 Amp.

46 Cat.III Ea. 1 590.00

Cat.III Ea. 1 662.00

Cat.III Ea. 1 730.00

Providing & erecting 415 V MCB three Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

(a) 6 to 32 Amp.

47 Cat.III Ea. 1 582.00

Cat.III Ea. 1 641.00

Cat.III Ea. 1 709.00

Plastic enclosure fitted with DIN rail suitable for

incorporating One / Two nos. MCB

Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

(i) Single phase 4 way SS Double door (IP-43) Ea. 1 623.00

51 3-11-5. (ii) Single phase 6 way SS Double door(IP-43) Ea. 1 877.00

(iii) Single phase 8 way SS Double door(IP-43) Ea. 1 1141.00

( iv ) Single phase 12 way SS double door(IP-43) Ea. 1 1478.00

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

(i) Three phase 4 way SS Double door for single

phase outgoing horizontal box

(ii) Three phase 6 way SS Double door for single

phase outgoing horizontal box

(iii) Three phase 8 way SS Double door for horizontal

single phase outgoing

(iii) Three phase 12 way SS Double door for horizontal

single phase outgoing

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail, confirming to

IS 13032 and BS 5486-1986,IP-54 suitable for 63/100

AMP TPN MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should be used of

same company of MCB to be used)

(A)4 way outgoing Ea. 1 9925.00

(B)6 way outgoing Ea. 1 12061.00

(C)8 way outgoing Ea. 1 13688.00

(D)12 way outgoing Ea. 1 18480.00

Vertical MCB distribution board (VTPN)

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail, confirming to

IS 13032 and BS 5486-1986,IP-54 suitable for 250 AMP

TPN MCCB + RCCB as incomer and three phase outgoing

53 as per following .(The DBs should be used of same

company of MCB to be used)

(A)4 way outgoing Ea 1 13315.00

(B)6 way outgoing Ea 1 15450.00

(C)8 way outgoing Ea 1 17078.00

(D)12 way outgoing Ea 1 21870.00

Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V. having characteristic of quick

action & tripping with all advance feature and do not in

54 3.12.1 corporate any electronic component. for following

maximum rating eracted as directed

(i) 25 Amps.DP Cat. III Ea. 1 1950.00

(ii) 40Amps. DP Cat. III Ea. 1 2213.00

(iii) 63Amps. DP Cat. III Ea. 1 2628.00

Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

phase and neutral 415V. having characteristic of quick

action & tripping with all advance feat

(i) 25Amps. FP Cat III Ea. 1 2544.00

(ii) 40Amps. FP Cat III Ea. 1 2611.00

(iii) 63 Amps. FP Cat iii Ea. 1 3010.00

(iv) 100 Amps. FP (100 mA Sensitivity) Cat iii Ea. 1 4272.00

Providing and erecting metallic vitrified danger notice

56 3-13-1. board as per language suggested by engineer incharge for Ea. 1

MEDIUM VOLTAGE installation to be erected as per IS-

Providing and erecting metallic vitrified danger notice

57 3-13-2. board as per language suggested by engineer incharge for Ea. 1

HIGH VOLTAGE installation to be erected as per IS.-2551.

Providing & erecting Medium Voltage Danger Notice

58 3-13-3 Board sticker as per language suggested by engineer Ea 1

incharge of standard size as per IS-2551

Providing & erecting High Voltage Danger Notice Board

59 3-13-4 sticker as per language suggested by engineer incharge of Ea 1

standard size-as per IS

Providing and erecting required size HOT deep Galvanised

60 3-14-2 iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT Kg. 1

panel board, Motors etc. using proper clamp.

Providing and erecting required size Copper strip for

61 3-14-3 earthing of H.T. OCB / ACB/ Transformer, LT panel board, Kg. 1

Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper wire 8 to 16

Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high

charge dissipation suitable for following type of

(a) For Electrical Installation up to 440V in normal soil

64 3.14.9 Length of pipe - 1 Mtr Ea. 1 4546.00

Back filling compound - 1 Nos Bag of 15 Kg.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs E.a. 1 5703.00

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

SITC of 14.2 mm dia 3 mtr long Earth electrode of High

tensile steel electrode with 250 micron copper bonding &

1 bag of Carbon fill Based environment friendly backfill

tested as per IEC 62561-7 in NABL accredited Laboratory

65 10.5.5 and suitable stainless Steel double sided clamp. Eco 1 5933.00

Friendly rust proof heavy duty weather proof

Polyethylene Earth Pit Chamber with following

dimensions :254 mm dia (top), 330 mm dia (bottom) &

260 mm (height).

CABLE AND CABLE GLANDS/LUGS

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 1

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 1

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 1

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 1

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 1

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 1

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 1

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) 1

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) 1

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core) 1

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

67 4.3.4 pipe of following size of cables

(a)4 core 4.0 Sq. mm Mt 1 116.00

(b)4 core 6.0 Sq. mm Mt 1 125.00

(c)4 core 10.0 Sq. mm Mt 1 139.00

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(B) 4 core 25 Sq. mm 1

(C) 4 core 35 Sq. mm 1

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe

at road crossing or floor of following size of cables.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 1

(C) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core) 1

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size

(A) 4 core 2.5 Sq. mm 1

(A-1) 4 core 4 Sq. mm 1

(B) 4 core 6 Sq. mm 1

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(B) 4 core 16 Sq. mm 1

(C) 4 core 25 Sq. mm 1

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and Mtr

back filling the same and making the surface as normal .

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size of Mtr

cable or locating the fault all over the run and back filling .

the same and making the surface as normal ground.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

making up to following size of holes at both ends

(A) Up to 100 mm bore dia 1

(B) Up to 150 mm bore dia 1

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia 1

(B)63mm outer dia 1

(C))90 mm outer dia 1

(D)120 mm outer dia. 1

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

76 4.6.1 complete with out going tails, insulating tape etc for

following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm Ea. 1 33.00

(B) 2 to 4 core 6 Sq. mm Ea. 1 38.00

(C) 2 to 4 core 10 Sq. mm Ea. 1 38.00

(D) 2 to 4 core 16 Sq. mm Ea. 1 47.00

(E) 2 to 4 core 25 Sq. mm Ea. 1 51.00

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

4-7-2. high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

Disconnecting the cable connection and Providing straight

joint with PVC mould using heat shrink /cast resin type

epoxy compound Insulating material and making the joint

complete using necessary in line connectors, hardener,

earth continuity connection, spacers etc. and

80 4-9-1. reconnecting the same & ensure the joint resistance

within the limits as per IS.

(A) up to 25 Sq mm Cable Ea. 1 1073.00

(B) 35 to 95 Sq. mm cable. Ea. 1 1535.00

(C) 120 to 300 Sq. mm cable. Ea. 1 2628.00

FANS AND Accessories

Providing and erecting Approved make Ceiling fan with

double ball bearing ISI mark with condenser A.C. 23OV.50

81 5.1.1 c/s.1200 mm. sweep complete, canopy erected on Ea. 1 1581.00

existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

Supply, Installation, Testing and Commissioning of

suitable sweep, BEE 5 Star rated, Ceiling fan with Brush

Less Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9,

Service Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v (tolerance as per IS :

82 5-1-8. 374-2019), THD < 10%, compitible with electronic Ea. 1 2603.00

regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for

to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall

be approved by Engineer in Charge] (A) 1200 mm Sweep

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each

84 5.2.3 side and pierced through a 16 Gauge M.S. box / Heavy Ea. 1 107.00

Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Supplying Table fan approved make A.C. 23OV, 50 c/s.

cms. sweep oscillating complete with 3 mtrs. of 3core

round flexible wire and 3 pin plug top. [ Make shall be

approved by Engineer in Charge]

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt

86 5.3.3 lowers & square frame.

200mm with 1350RPM Cat.II Ea. 1 1687.00

250mm with 1350 RPM Cat.II Ea. 1 1353.00

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

Cat.II Ea 1 2034.00

[E] 450 mm dia 1400 RPM

Cat.II Ea 1 3899.00

Supplying and erecting approved make Bracket fan of

volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected

on wall or with lead Cores and connections

complete.Cat.II

Supplying and erecting approved make double ball

bearing oscillating type Heavy duty bracket fan with

Aluminium Blades A.C. 23OV. 50cy/s wall mounted with

height adjustment and rotary tilting device complete with

89 5-4-5. guard, wall bracket,mounting accessories as directed.

Supplying and erecting approved make pedestal fan A.C.

230V. 50 Cy/s. 400 mm sweep oscillating, type and

adjustable, height complete with guard regulator, &

standard lead flexible wires and plug top.Cat.II

Supplying and erecting approved make Pedestal

Circulatory fan A.C. 230 V. 50 Cy/s. 600 mm sweep and

adjustable height complete with guard, & standard lead

flexible wires and plug top. Cat.II

supplying and erecting wall mount speaker with rated

power of 30 watt/power tapping 30/15/7.5 watt

92 7-2-5 available,opening angle 180 degree H * 77 degree V Ea. 1 2544.00

,sound pressure level 88 dB ,frequency response of 70Hz

Supplying & erecting Mixing Console having channels,

Audio mixer with. Echo facility for live performance,

93 Auditorium & stadiums, having following features &

(A) 14 Channel Audio Mixer with ECHO Ea. 1 18204.00

Supplying & erecting four channel Echo Mixer Pre-

amplifier with following specification.

(i) Suitable to operate on 24OV.A.C. & 12 V D.C. Battery

(ii) B.B.D. Delay system ECHO facility on all inputs through

ECHO volume, Repeat & Delay system.

(iii) Peak LED for setting optimum distortion free input

(iv) Two outputs, variable for line & fixed for recording

(v)Compatible with Audio Mixing consoles

Supplying &, Erecting speaker system comprising 50W

handling capacity with frequency response of 55 -

95 7-5-1. 200,00Hz & 16 Ohms impedance with high efficiency Ea. 1 1933.00

2Nos. of 8 inch full range speakers housed in acoustically

suspended enclosure

Supplying and erecting Weather & Dust resistant sound

column with Aluminium case & Aluminium mesh grille

with foam layer under grill, rotary- switch for selecting

power taps / impedance having frequency response 150-

96 7-5-2. 20000 Hz with following specifications

(a) With 4 speakers, capacity of power handling 45W

(MAX) & 30 W RMS, each speaker have impedance of

respectively 300 ohms / 30 W, 500ohms/20W,I -

K.ohms/10 W, 2K. ohms / 5W.

Supplying microphones stands with sturdy mechanism,

treble free movement & positioning of microphones, free

from rust with superior quality of chrome plating with

following size.

(c)Fixed height 91 cms. & extendable up to 62 cms. with

round base of dia. 23 cms.

Supplying, Installing & testing approved make highly

sensitive microphone capable to pick up weak sound

from longer distance & wider area suitable for stage

98 7-6-2. shows, group singing with frequency response 50 - 16000 Ea. 1 2713.00

Hz. Having sensitivity of 1.6MV / Pa & impedance

250 ohms (Lo -Z), Supplied with quick detachable holder

& 10 mtr. twin core cable & 3 pin XLR connector.

Supplying and erecting approved make single phase servo

controlled voltage stabilizer suitable for input voltage

range 180/25OV. And output voltage range 225/235V.

8-15-3. A.C. complete erected.

Light SITC for High quality 100W LED Zoom Par RGB light,

office suitable to replace halogen Parcans from narrow

biuldin to wide beam angale with a beam angle adjustment from

g 11~35 degree through manual and DmX

Previo control options, 0~ 100% dimmable, High lumens per watt

us and having a brightness of 44000 Lux @ 2 Nos

Appro Mtrs at 11 Degree beam angle, black powder coated .

ved housing, yoke mount fixture with 3 Mtrs power

Tender cable, all accessories like C -clamp (Safe working load –

Estima 150Kg.) ,Chain Pin, antifall

ted System, Identification name plate,Safety bond with

Rate lockclip ,Nut Bolt etc for Fixing light.

SITC of High quality moving head moving head 16R light

used as a special effect light by integrating

three features of Beam, Spot, & Wash effect with high

precision gobos and colors for entertainment

lighting etc., with below specification:• Lamp : Philips

MSD Platinum 16R, 8000K• Power Supply : 100 -

240V AC, 50 - 60Hz.• Operation Modes : DMX512• Beam

Angle : 3°~7° (Beam mode) 5°~32° (Spot

mode)• Pan/Tilt Angle : 540°/ 250° (16 bit)• DMX

Channels : 19/21 Channel• Color Wheel : 14 fixed Nos

colors plus white with rainbow effect• Prism : 1:8 & 2:6, .

rotation in both dirct’s.• Dimension : L 435 x

W 344 x H 585mm• Gobo Wheel : 1 Rotating gobo wheel

with 12 gobos plus open 1 Static gobo wheel

with 17gobos plus open• Weight : 21.2 Kg• Protection

Rating : IP20 along with 3 Mtrs power cable, all

accessories like C -clamp (Safe working load – 150Kg.)

,Chain Pin, antifall System,Identification name

plate,Safety bond with lockclip ,Nut Bolt etc for Fixing

Supplying & erecting bank of all polypropylene condenser

(APP type) with standard capacity of 2,3,5,7, 10,12.5 &

KVAR units of P.F. correction for operation on 3 phase

c/s, 400 /440V (+ / - 10%) with externally discharging KV

resistance, earthing terminal & built on angle iron of AR

channel iron frame work and provided with terminal

cover box. Complete erected on provided iron bracket or

on floor duly tested by license.

Providing and erecting ,Fabricating the box type items

made from M.S. Sheet with A.I. supports, wings, doors,

3-16- handles other hardware materials as per requirement

4-B design with finishing by three tank powder coating

processed inside and outside painted, erected as directed

including minor civil work.

(A) Total Estimated Basic Amount in Rs.

(B) LIST OF BUYBACK ITEMS

Sr No Item Desciption Unit Qty Rate Amount in Rs.

B.1 Existing Tubelight with tube Each 1 20.00

Swicthboard - 2 module to 16 module (with all related accessories like switch,

B.2 Each 1 50.00

Socket, regulator, conduit)

B.3 Copper Wire size from 1.0 Sqmm to 6.0 Sqmm Mtr 1 2.00

B.4 Aluminium cable size from 10 Sqmm to 25 Sqmm Mtr 1 5.00

B.5 Copper cable size from 10 Sqmm to 25 Sqmm Mtr 1 20.00

B.6 SP MCB size from 6 to 25 A Each 1 10.00

B.7 Dp MCB size from 25 to 63 A Each 1 20.00

B.8 FP MCB size from 63 to 200 A Each 1 30.00

B.9 Exhasut Fan 200 mm - 300 mm (metal and PVC both) Each 1 90.00

B.10 Ceiling Fan - 1200mm Each 1 170.00

B.11 Wall Fan size- 400 mm - 600mm Each 1 150.00

B.12 Distribuiton Board SPN - 4 Way to 16 Way Each 1 70.00

B.13 Distribuiton Board TPN - 4 Way to 16 Way Each 1 90.00

B.14 ICTPN Switch - 32 A to 100 A Each 1 100.00

B.15 Flood Light - 50 to 200 Watt Each 1 150.00

B.16 2x2 LED Fitting - 36Watt Each 1 50.00

B.17 CFL Light Fitting- from 9W and 11 W Each 1 30.00

(B) Total Buyback Basic Value in Rs.

(A-B) Total Item wise Estimated Amount without GST (After Deduction of Buy Back) in Rs.

(Expense Within Limit of Rs.30 lacs + GST)

Note: GST will be paid Extra as actual