Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC AWARDED DUE TO L1 | |
| 2 | L2₹20.0 L+₹12,948 (0.65%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
25 Mar 2023, 6:00 pmClosed
GE (ARMY) NO 2 JODHPUR
Military Engineer Services, GE (ARMY) NO 2 JODHPUR, Near ASC Supply Depot, Ratanada Jodhpur-342011
REPAIR AND MAINTENANCE OF ALL TYPE OF FANS AND WINTER APPLIANCES INCL SOLAR WATER HEATER OF ALL TYPE OF MARRIED ACCOMADATION AT SHIKARGARH AREA UNDER GE (ARMY) NO 2, JODHPUR
2023_MES_576059_2
8841/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE (ARMY) NO 2 JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (ARMY) NO 2
₹50,000
Yes
16 Jun 2023
27 Feb 2023
27 Mar 2023
27 Feb 2023
25 Mar 2023
6 Mar 2023
Amount
Taking down ceiling fan, exhaust fan and wall mounting fan etc of any make, type & sweep including checking the serviceabilty of ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc in the presence of MES representative, transporting the same to work shop and refixing the same after replacing of unserviceable parts complete all as specified and directed . Note : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.
Dismantling and Removing old burnt copper wire winding of ceiling fans of any size & sweep of any make and rewinding with new enameled super copper wire of existing gauge as per old copper winding incl providing insulation by varnishing (golden), cleaning, oiling, greasing etc complete all as specified and directed
All as per Item No 2 as above but for Exhaust fan of any size & sweep of any make.
All as per Item No 2 as above but for Wall mounting fan of size & sweep of any make.
Dismantling carefully all parts of Ceiling fans/ Exhaust fan/ Wall fan of any size & sweep of any make, cleaning, oiling, greasing etc and refixing all the parts and testing complete all as specified and directed
Supply only exhaust fan PVC body frame in replacement of old unsv frame complete all as specified and directed
Supply only capacitor for ceiling fans / wall fan/cabin fan 2.5 mfd. ISI marked.
Supply only capacitor for exhaust fan 3.15/4.0 mfd. ISI marked.
Supply only ball bearing suitable for any type of ceiling fan.
Supply only ball bearing suitable for any type of exhaust fan/wall fan/pedestial fan.
Supply only MS clamps (Standard size) with rubber real with MS nut, bolts, check nut & split pin complete.
Supply only canopy for ceiling fans.
Supply only fan blade for ceiling fan of any type & size.
Supply only fan blade for Exhaust fan of any type & size.
Supply only fan blade for wall fan/pedestial fan of any type & size.
Supply only PVC exhaust fan motor in replacement of old unserviceable burnt motor for any type, size and make complete all as specified and directed
Supply and fix in replacement of down rod up to 2 feet including check nut bolts and quarter pin for ceiling fan complete all as specified and directed
Painting of ceiling fan of any make, type & sweep with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No. complete all as specified and directed
S&F for flexible PVC unsheathed twin core copper conductor cable of size 23/0.077 in nominal area complete all as specified and directed
Supply and fixing in repair electronic type regulator 240 Volts.
Supply and fixing in repair modular fan step regulator 2 module.
M&L for attending of complaint in MD Accn at shikargarh as complaint noted on daily basis at complaint cell Shikargarh for Unsv storage type water heater by disconnecting the electric connection and water inlet/outlet connection the from main and repairing the water heater storage type capacity 25/35/50 ltrs of any type and make, Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.
Supply only for replacement new heating element including rubber ring, washer, holding clamps and nuts of 1.5 KW capacity complete all as specified and directed .
Supply only for replacement new heating element including rubber ring, washer, holding clamps and nuts of 2.0 KW capacity complete all as specified and directed .
Supply only for replacement new thermostat of temperature variating ranging from 25 degree centigrade, suitable for 25 litre capacity geyser complete all as specified & directed.
Supply only for replacement new thermostat of temperature variating ranging from 25 degree centigrade, suitable for 50 litre capacity geyser complete all as specified & directed.
Supply only for replacement new PVC connection (heavy duty) for HOT and COLD water of 15 mm dia with required length with 2 Nos of brass, chromium plated nuts complete all as specified & directed.
Supply only for replacement safety valve ISI marked.
Supply only for replacement pressure realizing valve fo size 15 mm dia
Supply only bottom covering apparatus plate in two halves for Geyser of any capacity as per existing complete all as directed.
Supply only indicator lamp square type/round type/rectangular type as per existing at site, 220 volts complete all as specified.
Scraping of old painted surfaces of Geyser & making smooth surface for painting & applying one coat of white synthetic enemelled paint over the body of Geyser upto 50 litre capacity.
Supply and fixing in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps.
M&L for brazing the inner tank of any capacity not exceeding 25 cm in length including top portion and making the Geyser leak proof and testing after filling with fresh water, complete all as directed.
S&F in replacement Bib tap ISI Marked of size 15 mm cast copper alloy with clutch or butterfly handle ,screwed for iron pipe or for brass ferrule and fixed complete all as specifed and directed by Engr-in-charge . Make : Zolato.
S&F in replacement 3 pin top plug 15 Amp press type complete all as specified.
Supply only apparatus assembly complete with incoming /out going brass pipe complete with gasket, nuts, bolts, washers as required for fitting for upto 50 ltr capacity.
Taking out old and Supply & fix gun metal non return valve 15 mm dia including proper connection complete all specified and directed by Engr-in-charge.
Taking out old and Supply & fix angle valve 15 mm dia including proper connection complete all specified and directed by Engr-in-charge.
M&L for attending of solar water heater complaint noted at complaint cell shikargarh and taking down/disconnecting 300 LPD Solar water heater for repair /maintenance including servicing of solar Water Heater and De-scalling of Solar Water heating tank and pipe lines by re-circulating descaling solution with pumps suitable for 300 LPD solar water heating plant including replacement of minor parts such as nuts,bolts,washers etc complete all as specified and as directed installed at roof top of bldgs upto 02 to 04 story and refixing & testing and commissioning after repair complete Note : Any unsv parts reqd for replacement shall be measured and paid separately under respective item of Schedule as supply only.
Supply only complete set of flat plate collector with toughened glass suitable for 300 LPD solar water heating plant complete all as specified and as directed
Supply only glazing gasket suitable for flat plate collector toughened glass 300 LPD solar water heating plant complete all as specified and as directed .
Supply only toughened glass of suitable size as per existing for 300 LPD solar water heating plant complete all as specified and as directed .
Supply only flange with nipple suitable for 300 LPD solar water heating plant complete all as specified and as directed .
Supply only flange gasket with nut & bolt complete suitable for 300 LPD solar water heating plant complete all as specified and as directed .
Supply only hose pipe 25 mm dia , pressure 12 kg/sqcm with 02 Nos jubli clamps suitable for connecting inlet and outlet of 300 LPD solar water heating plant complete all as specified and as directed .
Supply only storage tank SS 304 / SS 316 PUF of suitable size or as per existing as on ground for 300 LPD solar water heating plant complete all as specified and as directed .
Cleaning / descaling of flat collector set of 3, of solar heating system by using water/chemical for 300 LPD solar water heating plant complete all as specified and as directed .
S&F Gun-metal, globe or gate valves 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed .
S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed .
S&F Gun-metal, globe or gate valves 15 mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed .
S&F PVC Tank cover suitable for 500 ltr tank as per existing sample complete all as specified and as directed .
Cleaning and removing all scale and dirt etc, from PVC tanks upto 500 ltr and from mouths of circulating pipes and change damaged float valve or washers etc make storage tank water leakage proof at entire satisfication and complete all as specified and directed
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed
M&L for Lagging to pipes used in internal water supply or plumbing all round with, 13 mm thick nitrile rubber insulation for expose of pipe including taking down unserviceable for GI pipe size 15/20 mm dia
Taking down old and S&F of 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed
Taking down old and S&F of 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed
Taking down old andS&F of 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed
CHAHAR ENGINEERS AND COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .