Reconstruction of Hall/Room, Plastering, Painting etc. in Cantt. Board Office, Ambala Cantt.

Amount

Dismantling Brickwork built in C. Mortar all as specified in MES SSR 2020.

Dismantling RCC work/R:B:C in roof, floors (other than ground floors), beams, Staircases, landing including reinforcement cut as required to facilitate demolition complete all as sp. in MES SSR 2020.

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L Brickwork in C.Mortar 1:4 straight or curved on plan exe. 6 m mean radius with Sub class 'A' bricks all as specified in MES SSR 2020.

M/L brickwork with fly ash brick straight or curved on plan exe. 6m mean radius with designation 75 bricks all as specified in MES SSR 2020.

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2020

Removing of malba/dismantle material to a distance upto 05KM.

M/L screed 15-20 mm thick in C. mortar 1:4 for laying of marble/tiles all as sp. in MES SSR 2020.

S/F 2nd class Hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2020.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in MES SSR 2020.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2020.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2020.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2020.

Ditto, but PC Plaster in cement Mortar 1:4, 12 mm thick finished even and smooth including water proof compound all as sp.

M/L anti Skid ceramic tiles 300 mm x 300mm or 450mm x 300mm x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR, 2020 ( colored tiles) including screed 15-20 mm thick.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2020 ( colored tiles).

S/F Aluminium Frame (color coated) Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for widows, doors & partly fixed partly openable frame, including hinges door closer, handle etc. complete all as specified in MES SSR 2020.

Providing & fixing 10-12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface (RCC ceiling surface) with design as per requirement and approved by the Engineer-in-charge all as specified in MES SSR, 2020

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

Putty filling two coats application of one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

Heritage Granule finish/Rustic Finish- Application of one coat of quartz primer of spectrum or equivalent and application of granules of desired shade with trowel and top coat of transparent silicon to make surface water repellent all as sp.

M/L for one light point or one fan point conrolled by one switch with cables 1.5 Sqmm in size copper conductor PVC sheathed single core in PVC conduit all as sp. in MES SSR 2020.

M/l for modular switch 1 way 6A 1 module complete all as sp. in MES SSR 2020.

Bidder Name

Amount

A N BUILDERS (GSTN-06AADFA9365M1Z2) BID ID -3294055

KULWANT SINGH (GSTN-NA) BID ID -3294201

M/s. Om Jagdish Builders (GSTN-NA) BID ID -3292788

R N COMPANY (GSTN-NA) BID ID -3292776

Swastik Builders (GSTN-NA) BID ID -3292793

R N COMPANY (BID ID -3292776)

Swastik Builders (BID ID -3292793)

A N BUILDERS (BID ID -3294055)

KULWANT SINGH (BID ID -3294201)

Swastik Builders (BID ID -3292793)

R N COMPANY (BID ID -3292776)

M/s. Om Jagdish Builders (BID ID -3292788)

KULWANT SINGH (BID ID -3294201)