Maintenance of internal electrification, light fittings and allied work at Offrs Mess, NCOs Mess Airmen Mess No 1 and Airmen Mess nO 3 at AF Stn Jodhpur

Amount

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor(FRLSH), single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in and including PVC Casing and Caping, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : -

One light point/exhaust fan point controlled by one switch or one ceiling fan point controlled by one switch & electronic type fan regulator.

One light point controlled by two Nos 5 Amps switch two way

One 3 pin 5 Amp switch & socket outlet on same board with other switches.

One 3 pin 5 Amp switch & socket outlet on Independant board.

One bell point controlled by one switch 5 Amps bell push.

All same as per item ser No 2 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor(FRLSH), single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.

S&F(in repairs) Switch piano, flush type, single pole, one way, 6 Amp.

S&F(in repairs) Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type.

S&F(in repairs) Switch Socket combination outlet 6 pin, 6/16 Amp, flush type

S&F(in repairs) Ceiling rose surface bakelite 65x50mm three terminal.

S&F(in repairs) Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

S&F(in repairs) Stepped type electronic fan regulator, socket size, flush type 230V AC.

S&F(in repairs) Stepped type electronic fan regulator, switch size, flush type 230V AC.

S&F(in repairs) electronic Bell Bul-Bul music, 230 volt, single phase.

S&F(in repairs) bell push, type, 6 Amps, 2 Module

S&F(in repairs) switch modular single pole one way 6 Amps 230 volt 1 module.

S&F(in repairs) switch modular single pole one way 16 Amps 230 volt 1 module.

S&F(in repairs) Socket modular 6 Amp 2/3 pin combined two module.

S&F(in repairs) Socket modular 6&16 Amp 2/3 pin combined two module.

S&F(in repairs) electronic fan regulator modular stepped type 120 watt, two module.

S&F(in repairs) modular white or Ivory cover plate with frame 1 module

S&F(in repairs) modular white or Ivory cover plate with frame 2 module

S&F(in repairs) modular white or Ivory cover plate with frame 3 module

S&F(in repairs) modular white or Ivory cover plate with frame 4 module

S&F(in repairs) modular white or Ivory cover plate with frame 6 module

S&F(in repairs) modular white or Ivory cover plate with frame 8 module

S&F(in repairs) modular white or Ivory cover plate with frame 12 module

Supply and fix in repairs 3 Pin Plug Top 16 Amps, 240 volt insulated bakelite body(Ivory/White)

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB TPN/FP, 40 to 100 Amps 415 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply and replace Sheet metal enclosure SPN DBs, 2 way without bus bar complete including taking out old all as specified and directed.

Supply and fix in repairs metal clad, 2 Pin+Earth Plug Top 16 Amps, 240 volt.

Taking out existing unserviceable switch board plates any type, dismantling switches cafully, stacking at site for use of serviceable switches and supply and fixing new 3mm thick masonite laminated sheet top cover fixed on 6/8 inch x 10 inch MS box and brass screw for mounting switches, sockets, regulator etc including making necessary electrical connection with 1.5 sqmm single core copper mulitstranded cable all as directed at site by Engineer-in-charge. Note : New Switches, sockets, fan regulators etc if required will be measured and paid separately under relevant items.

All as per item ser No 32 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 6/8 inch 4 inch MS box.

All as per item ser No 32 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 4 inch x 4 inch MS box.

Supply and replace sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in replacement LED study table light fitting, swivel base, wall mouning type, corrosion resistant, superior finish and including 01 Nos 5 watt LED lamp B-22 Base type, complete all as specified and directed.

S&F LED light fitting 1 x 10W bulkhead luminaires including LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete all as per all as per cat ref no. LBHP-10-CDL or equivalent in approved makes.

Supply and fixing round/square shape 10 watt 220 volts AC Surface mounting type with high efficiency PMMA diffuser soft glare free light(day cool/warm light) complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per Crompton Cat No LCRP-10-CDL or LSRP-10-CDL or equivalent in approved makes.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as per crompton cat ref no. LCTLR-36-FO-CDL or equivalent in approved makes.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for following sizes of wires :-. (Note : GI saddle shall be used to fix PVC conduit and distance between two saddle shall not be exceed 1.2 mtr)

Two runs of 2.5 Sq.mm main cable alongwith one run of single core 2.5 Sq.mm for continuous earth wire

Two runs of 4.0 Sq.mm main cable alongwith one run of single core 4.0 Sq.mm for continuous earth wire

Two runs of 6.0 Sq.mm main cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire

Two runs of 10.0 Sq.mm main cable alongwith one run of single core 10.0 Sq.mm for continuous earth wire

Shri Maruti Trading Co.

M/S VENUS BUILDER

new india engineers

Nvimal Engineers and Contractor

Siddharth Constructions