REPAIRS TO JOINERY, FLOORING, ROOF TREATMENT, SANITARY FITTINGS AND OTHER B/R WORKS AT AREA A AND C AT AF STN WADSAR UNDER GE (AF) CHILODA

Demolition of brickwork built in cement morter including work all quoins, aches, pillars, etc complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out side MOD Land complete all as specified and directed.

All as per item No 71 above but length of tower bolt 150 mm complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and directed.

M&L for new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting on plastered surfaces preparotory to distempering including preparation complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed.

Repair to Aluminium windows and ventilator including taking down, refixing in same opening after changing glass pan/aluminium sections as required. (Note : aluminium sections/glass pane /wire mess shall be measured and paid seperately under respective items)

M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm,complete all as specified and directed.

M&L for raking out joints in floor / wall tiling and pointing with white cement mixed with colour pigment to match complete all as specified and directed.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and directed.

Repairs & maintenance of sensor of pillar tap / urinal / wash hand basin etc by replacement of internal circuit & assembly and making it functional complete all as specified and directed.

S&F in repairs UPVC pipes of 15/16mm bore including all fittings complete all as specified and directed.

S&F in repairs UPVC pipes of 20mm bore including all fittings complete all as specified and directed.

10 Nos (per cm of height)

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x30cmx 25mm thick with mixtuer of white and in equal propotion and no pigment ,set jointed in neat cement slurry including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.complete all as specified and directed.

Demolition of RCC (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing,chajjas, parapet, lintel beam etc and similar suspended work complete all as specified and directed.

M&L for reinforced cement concrete nominal mix in type B-1 (1:2:4) (20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels and similar works complete all as specified and directed.

M&L for reinforced cement concrete nominal mix in type B-1 (1:2:4) (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and cover slab and the like complete all as specified and directed.

Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick Cement concrete type D-2 1:4:8 (40 mm graded graded aggregate) as in sub base of floor finishes and pavings and similar works complete all as spd and directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in padding complete all as specified and directed.

All as per item No 23 above but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed.

M&L for rendering in CM (1:4) 10mm thick over RCC roof / brick wall mixed with water proofing compound @ 200 ml per bag of cement, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

All as per item No 163 above but capacity of tank exceeding 500 Litres and not exceeding 1000 Litres complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm venee

red particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core etc supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of size 150mm long extruded section complete all as specified and directed.

S&F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm )etc complete all as specified and directed.

S&F in repairs telescope channel 460mm Long 1st quality fancy type suitable for sliding racks of inbuilt cuboards etc all as specified and directed.

S&F stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts complete all as specified and directed.

M&L for fixed in repairs 18/19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , or aluminum frame work , complete all as specified and directed.

S&F in repairs mild steel peg stay 250 mm long for steel window / ventilator complete all as specified and directed.

S&F in repairs anchor and fastners size dia 10 mm ,length 150 mm complete all as specified and directed.

S&F in repair door seal strips strong rubber weather stripping door at bottom (0.80 m to 1.20 m length) complete all as specified and directed.

S&F in repairs for fixing angle for brackets should be 40 mm X 40 mm X 6 mm with MS Clamp 600 mm to 700 mm long fixed to cabinets ,wooden cupboard wall hung ,including anchor and fastners , with two coats of synthetic enamel paint to brackets,including making good etc complete all as specified and directed.

S&F in repairs stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame complete all as specified and directed.

S&F in repairs curtain with blade (vertical blinds),or roller blind , having roller , threads / Chain & pully system (clutching mechanism) etc complete complete all as specified and directed.

S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in reapirs Magnetic catches of size 25 mm x 12mm, No.3, complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with including taking down of door and refixing the same complete all as specified and directed.

S&F in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and directed.

Re-securing or easing and adjusting without taking down shutters exc 1.00 sq.m and n exc 2.00 sqm each of any description complete all as specified and directed.of any description and size complete all as specified and directed.

Re-securing or easing and adjusting without taking down shutters exc 2.00 sqm each of any description complete all as specified and directed.

Repairs only curtain with blade (vertical blinds),or roller blind , having roller , threads / Chain & pully system (clutching mechanism) etc complete complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply only powder coated aluminium sections suitable for doors, window and ventilator for under above respective item existing to match complete all as specified and directed.

Supply only 3 mm thick sheet glass ordinary suitable size of window for the under above respective item to match complete all as specified and directed.

Supply only 5.5 mm thick sheet glass ordinary suitable size of door for theunder above respective item to match complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane complete all as specified and directed.

All as per item No 40 above but 6mm to 8mm dia complete all as specified and directed.

S&F in repairs brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle complete all as specified and directed.

Supply only 3 mm thick figured glass suitable size of window for theunder above respective item to match complete all as specified and directed.

S&F in repairs hasp and staple, aluminium anodised, safety type, with hinges pin including bolt to hinges plate and fixed with screws of size 75 mm with autohings complete all as specified and directed.

Repairs of loose wooden doors by replacing unserviceable existing hinges, fittings & adjustment for smooth functioning as required (built in steel cupboard) complete all as specified and directed.

S&F 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

Supply & fixed in repair CP peg set of four as per sample kept in GE’s office complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and directed.

Welding in repairs to steel gates,wicket gates, railings, windows , doors, cupboards etc n. exc 2.5 cm in length and thickness of metal to be welded exc 6 mm but n exc 9mm or similar works, complete all as specified and directed.

S&F false ceiling 12 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film fixed complete all as specified and as directed by Engineer-in-Charge. Make : Saint Gobain / Armstrong / Everest or equivalent.

Welding in repairs to steel gates,wicket gates, railings, windows , doors, cupboards etc exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 6 mm but n exc 9mm or similar works, complete all as specified and directed.

M&L aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 62 x 31.75 x 1.50 mm, bottom size 62 x 31.75 x 1.50 mm and shutter top & bottom of size 40 x 18 x 1.50 mm and sides (handle) of size 40 x 18 x 1.50 mm and lock side shutter frame of size 40 x 18 x 1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and fixing 4 mm thick glass with necessary rubber beading gasket etc including fixing of stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture covering whole area of opening and fixed with aluminium beading to aluminium frame complete all as specified and directed.

M&L for aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 4 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed.

S&F in repair stainless steel plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed.

S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tub of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge.

S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

etc. including petty repairs materials like screw/nails, plug etc. to make it functional complete all as specified and directed. Note:- Any item required to be replaced shall be paid under respective items

S&F in Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm t

S&F in repair 1.00 mm thick steel rolling shutters,with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type complete all as specified and directed.

S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

hick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe complete all as specified and directed.

S&F in repairs aluminium composite panel of accucell/ gurind/EPP 3 mm thick exterior grade PVDF with foil thick of 0.25mm & frame work made out from aluminium section of size 38x25mm supported on masonry wall/ceiling/RCC with the help of MS bracket fixed with brick fastener /anchor fastener and groove filled with silicone weather proof sealant of DOW corning etc incl scaffolding at any height and fixing as in any position per manufacturer instructions complete all as specified and directed.

S&F in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges patches etc. including petty repairs material like sand, cement and aggregate to make it functional complete all as spefified and directed. Note:- Any item required to be replaced shall be paid under respective items

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fitting/fixtures and any obstruction to water supply, requiring plumber work and carry out minor repairs such as replacement of washers, checknuts, tightening of fitting of flushing cistern etc including petty materials like washers of all sizes, thread (Shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed. Note:- Any item required to be replaced shall be paid under respective items

S&F repairs stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and directed.

Supply & fixing 75mm bore PVC (SWR) pipes single socketed (pressure rating not less than 4kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge.

S&F in repair Soild PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.

S&F in repairs PVC 110mm bore (SWR) coupler complete all as specified and directed.

S&F in repairs PVC 75mm bore (SWR) coupler complete all as specified and directed.

S&F in repairs false ceiling 12 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film fixed complete all as specified and as directed by Engineer-in-Charge.

Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing complete all as specified and directed.

Liquid water proofing compound complete all as specified and directed.

Dismantling water tanks exc 250 but n.exc 500 Ltrs capacity complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed.

S&F in Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F continous (Piano)type hinges stainless steel bright finish or lectro galvanised with wide of flaps 30mm complete all as specified and directed.

M&L in repairs Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm of Jindal,National,Hindlco fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in partition all as specified and directed.

S&F in repairs for 12 mm thick toughned glass as in doors, partitions including hinges, door closer/automatic door closer/floor spring and similar work including cutting to shape, moulding of edge etching design if reqd including locking device and SS handles drilling holes required and necessary fitting for fixing the same complete all as specified and directed.

S&F in repairs stainless steel plate rack , 0.5mm to 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc complete all as specified and directed.

S&F in repairs for Solid PVC kitchen cabinets/Cupboard made with door frame of size 48x40mm and 16-18 mm thick shutter and including 75mm size Stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment. (ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ. (iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

S & F in repair auto close hinges stainless steel bright finish , size as per site requirement complete all as specified and directed.

Dismantling water tanks exc 500 but n.exc 1000 Ltrs capacity complete all as specified and directed.

S&F in repair 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F for 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin 550 mm x 400 mm including all necessary fitting such as, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces,complete all as specified and directed.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and directed.

S&F in repairs soap dish,chromium plated, 100X100mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

Supply & fixing 110mm bore PVC (SWR) pipes single socketed (pressure rating not less than 4kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls/sheets with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge.

S&F 500 Ltrs capacity rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc and including fixing only ball valves complete all as specified and directed.

S&F, in repairs vitreous China squatting pan, orissa pattern of size 580mm x 440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S&F in repairs 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed.

S&F in repairs 15 mm size pillar taps, fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm size stop valve with long shank (concealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs 15 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed.

S&F 750 Ltrs capacity rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc and including fixing only ball valves complete all as specified and directed.

S&F in repairs 15 mm size angle cock with wall flange cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15 mm size sink cock ( wall mounted) with long swivel spout and wall flange with all connected accessories, complete all as specified and directed

S&F in repairs Vitreous china EWC wall mounted snow white of size 610mm x425mm x710mm with twin flush plastic cistern including soft close seat cover complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern ,white excluding fixing cistern and flush pipe trap front or back inlet including seat cover of any pattern complete all as specified and directed.

S&F in repairs Vitreous china urinal, full stall type, white incl sensor of snow white of size 360mmx330mmx740mm including complete assesories fixing on wall etc complete all as specified and directed.

Fixing only after repairs for Vitreous china urinal, full stall type, white incl sensor of snow white of size 360mmx330mmx740mm including complete assesories fixing on wall etc complete all as specified and directed.

S&F in repairs wall mounted shaving swivel mirror of size 200mm dia double sided mirror with one side convex Mirror , 3mm thick glass , double coat for protection and longevity fixing with screw/ nails complete all as specified and directed.

S&F in repairs vitreous china wash hand basin oval type over /under counter wash basin 560x470mmx 190mm of Ivory colour complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.

S&F in repairs 15 mm size wash hand basin centre hole mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed complete all as specified and directed.

S&F in repairs seat cover fixing with existing EWC with complete acessories etc complete all as specified and directed.

S&F in repairs wall mixer with bend pipe for over head shower with mixing hot & cold water, cast copper alloy, chromium plated with all connected accessories complete all as specified amd directed.

S&F in repairs 15 mm size brass chromium plated shower rose 125 mm dia with swivel joints, fixed in position complete all as specified and directed.

S&F in repairs 15 mm size two way bib cock with single handle and wall flange cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and directed.

M&L for replacement of brass spindle with nylon washer to existing 15 mm size chromium plated bib taps,pillar taps, stop cock or angle valve of any type or description complete all as specified and directed.

S&F in repairs Push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals,(Minimum weight 15mm-50gms) complete all as specified and directed.

S&F in repairs 15 mm size SS/ Brass chromium plated zig zag type connector pipe(coupling) for connecting to wall mixer / basin mixer including GI tubing etc complete all as specified and directed .

S&F in repairs plastic water closet seat cover, with white/ ivory colour closed pattern with flat bottom fixing to existing EWC including necessary arrangements etc,complete all as specified and directed.

S&F in repairs towel ring with wall flange complete all as specified and directed.

S&F in repairs hand shower with health Faucet ABS body with 1 meter SS braided connection pipe and wall hook complete all as specified and directed.

S&F in repairs Ist quality bathroom mirror with cabinet of size 400x500mm ,fixing on wall with brackets/screws/ studs etc, complete all as specified and as directed.

S&F in repairs 40mm pvc pipe fixing to wall / floor etc with clamp/ screw/ nails, complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing including connected fitting, incl cleaning of pipe, connection ,fixture, and disconnection of fitting fixture etc. from tubing complete all as specified and directed.

S&F in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed.

S&F repairs 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for cutting chases,in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm grith complete all as specified and directed.

S&F in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed.

S& fix in repairs 40 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed.

S&F in repairs toilet paper holder of brass, chromium plated fixed to walls

Re-fixing of 15 mm bore galvanized iron tubing medium grade retrieved from item No 194 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete all as specified and directed.

M&L for preparation of existing treatment by scrappers or other means of wall surface and applying one coat of acrylic paint exterior grade complete all as specified and directed.

S&F in repairs 15 mm size pillar cock with swan neck spout and aerator left/right fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs grating doom of size 150mm x 150 mm stainless steel fixing with white cement/ solvent on floor,complete all as specified and directed.

S&F in repair overhead tank PVC cover thread/ hinged type with suitable locking arrangement suitable upto 750 Ltrs capacity complete all as specified and directed.

S&F in repairs 20 mm dia decorative aluminium anodised powder coated tubular curtain rod including brackets, knobs, end stops fixing with screw/ nails etc complete all as specified and directed.

M&L for welding of old steel windows or ventilator in situ as per site requirement or as directed by Engr-in-Charge with portable welding set and welding rod including cleaing, oiling,greasing & painting , fixing of Peg Stay /Glass/ wire mess etc complete all as specified and directed (Note : Peg Stay /Glass/ wire mess shall be measured and paid seperately under respective items).

S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 450 mm,complete all as specified and directed.