MMGSY/SCSP

Name of work :-Resurfacing of Chalala to Dahida Road (NP BT) Km.0/000 To Km.2/300

Ta.Dhari(Under MMGSY-SCSP-2026-27), Dist.; Amreli.

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 0.62 One 28455.09

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 1009.00 One 157.91

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

From borrow area with all lead and

lift.Executed with machineries.(Selected soil

to be used for earthwork shall be from

BORROW AREA only having CBR not less

3 Earthwork in cutting in all sorts of soil and 952.00 One 134.12

soft Murrum including conveying and Cum

spreading the suff embankment as and

where directed within 200 meters from the

end of the cutting with all required lead and

4 Supplying, stacking, spreading, rolling, 407.00 One 602.46

watering and consolidation to desired Cum

density of quarry spall with all lead and lift.

5 Scarifying graveled macadam or Bitumen 892.50 One 41.60

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

6 WBM Grading-1 229.00 One 1810.32

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

1 as per Technical Specification Clasue.405

By menual means.

7 Rolling and Watering of earthwork in layers 407.00 One 22.95

with vibratory roller including filling in Cum

depression which occur during the process

8 Providing and appliying primer coat with 2231.30 One 101.60

bitumen emulsion SS1 on prepared surface Sqm

of granular Base including clearing of road

surface and spraying primer at the rate of

0.75kg/sqm using mechanical means,

9 Providing and laying bitumenous grout 512.00 One 3013.63

37.50mm thick using Emulsion RS1 for tack MT

coat at the rate of 2.50kg/10sqm on

B.T.Surface and using BT chips for required

gradation with the asphalt of grade VG-30 at

the rate of 1.99% i.e 19.90kg/MT by weight

of mix including heating and mixing in

drum mix plant , transporting the mix and

spreading the same by paver finisher and

consolidation as per MOST specification

including cost of all materials fuel, labours,

tools and plants etc. using contractor's own

drum mix plant etc. complete.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

10 Providing, laying and rolling 37.50mm thick 563.00 One 4119.38

compacted bitumenous Macadam (B.M.) in MT

one layer with B.T. aggregates as specified

and using Emulsion RS1 for tack coat at the

rate of 2.50kg/10sqm (As per IRC-16) and

using bitumen for mixing with agg. at the

rate of 3.40% i.e 34.00kg/MT of total mix

including mixing in Drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller including

necessary including cost of hire charges,

firewood, oil, lubricants, labour charges, etc.

by using constractor's own Drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of sepcification.

11 Providing and laying and rolling of 20mm 315.00 One 5104.13

thick Compacted mix seal surface with B.T. MT

and aggregate as spedified using bitumen

Grade VG-30 for mixing with aggregate at

the rate of 5.10% i.e 51.00Kg/MT of total mix

including heating and mixing in drum mix

plant and spreading the same by paver

finisher and consolidation with vibratory

roller including necessary firewood, oil,

lubricants, labour charges using contractor's

own drum mix plant, machineries and

equipment, tools etc including flushing of

sand 0.30cum/10sqm etc. complete in

accordance with the requirement of

12 Excavation for foundation upto 1.5m depth 283.00 One 253.88

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. Dense or hard soil.

13 Excavation for foundation upto 1.5m depth 283.00 One 432.61

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. Hard Murrum

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

14 Providing and casting in situ ordinary 682.00 One 3921.63

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

15 Providing and filling in foundation with 48.00 One 3345.58

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

16 Providing parapet of ordinary cement 50.00 One 1086.62

concrete M-200 as per detailed drawing with Rmt.

necessary reqinforcement including

shuttering laying vibrating and finishing to

line and level complete (ii) cast in situ.

17 Providing and casting in situ Contolled 30.00 One 5300.56

cement concrete- M-200 for average Cum

75/150mm thick wearing coat laid as

directed incuding. tamping, vibrating,

finishing, curring and filling in joints with

bitumen complete.

18 Providing and laying weep hole in 268.00 One 56.12

Abutment and returns by using A.C/PVC No

pipe of 100mm. Incl. fixing in proper grade

and jointing the complete as per detailed

19 Providing and laying in Position FE - 4.860 One 73858.69

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

20 Providing and Fixing in position FE- 0.530 One 73243.01

500/500D TMT bar reinforcement including MT

cutting, bending, hooking, and tying

complete as per detailed drawaing (A)RCC

kerb (B) RCC Footpath (B) RCC Solid Slab/

App. Slab / Wearing coat.

21 Providing and fixing Precast cement concrete 7.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

22 Providing and fixing Precast cement concrete 180.00 One 344.07

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

23 Providing and fixing ordinary Kilometer 2.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

24 Providing and fixing Indicator stone of 83.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

25 Village/Bump Ahead sign. : Providing and fixing 9.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid

etching coated with one coat of apoxy primer and two

coats of best quality epoxy paint reflectorised with

retro reflective sheeting as per latest MOST

specification letter and numbers should be as per

IRC:30-1968, 3.1 Mt. long (2 nos) stand post and frame

fabricated from suitable size iron angle of

50x50x5mm, painted with best quality epoxy coating

in black and white bends, the details of symbole on

inscription/ numerals for each board shall be as per

the instruction of the Engineer in charge. The fixing at

site shall be in C.C 1:2:4 block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineer Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

26 Hazard Marker sign : 2.00 One 2423.73

Providing and Fixing sign boards made out of 2mm No

aluminum sheet : size 90*30 cms. rectangle as per

design / Drawing attached (IRC). Pretreated with

phospheting process and acid etching : coated with

one coat of epoxy primer and two coats of best

quality epoxy paint: reflectorised with retro reflective

sheeting as per latest M.O.S.T specification: 3.1 M.

long (2 nos) stand post and frame fabricated from

suitable size iron angle of 35*35*3mm and 50*50*5mm

: painted with best quality epoxy coatings in black

and white bends the details of symbole or inscription

/ numerals for each board shall be as per the

instruction of engineer in charge the fixing at site shall

be in 1:2:4 CC block of size 45*45*60 cms for each leg:

including excvation curing etc. comp.under the

supervision of engineer-in-charge.(B) Engineering

27 Direction sign (Junction board):-Providing and fixing 1.00 One 14831.70

sing boards made out of 2mm aluminium sheet; size No

244 x 122cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision

of engineer in charge.(A) Engineer Grade(VR)...

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

28 Sign Board per square Meter :-Providing and fixing 6.00 One 7615.37

sing boards made out of 2mm aluminium sheet; size 1 No

Meter x 1 Meter as as per the design given by

engineer in charge pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should

be as per IRC-30-1968, 3.1m long (2 nos) stand post

and frame may be fabricated either from suitable size

iron angle of 35 x 35x 3mm & 50 x 50 x 5mm & 75 x

75 x 6mm as required painted with best quality

epoxy coatings in black and white bends. the details

of symbol or inscription / numerals for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60cms. for each leg. including excavation curing

etc. complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

29 Citizen's information Board. Providing and fixing of 1.00 One 7399.26

typical MMGSY information board as per instruction. No

Two MS sheets of 3 mm thick, of 900 mm x 750mm

size fixed at top & bottom duly rivetted with MS

angles of 25 x 25 x 5 mm thick M.S angle shall be

welded by two vertical M.S angle of 5 mm thick to

mm x 75 mm of 12 SWG square tubes posts duly

embedded in cement concrete M-15 grade blocks of

600mm x 600mm x 750mm, below ground level. The

letters & figure of any shade reflectorised with High

Intensity Prismatic Grade Retro Reflective Sheeting of

Type-4 as per ASTM D-4956 and latest MORD

specifications; All sections of framed posts and steel

tube will be painted with primer and two coats of

epoxy paints as per drawing Clause 1701 and

Annexure 1700.1 (10.16). (A) Class-B High intensity

Grade Retro Reflective sheeting.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

30 Road Marking with Hot Applied paints with 385.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria

for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

31 Cat Eye / Road Stud / RPM: Supplying of 385.00 One 326.23

Molded Twin Shanks Raised Pavement No

Markers made of polycarbonate and ABS

moulded body and reflective panels with

micro prismatic lens capable of providing

total internal reflection of the light entering

the lens face and shall support a load of

13635 kgs. tested in accordance to ASTM D

4280 Type H and complying to Specifications

of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06.

The height, width and length shall not

exceed 20 mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on

each side and the slope to the base shall be

35 +/- 5 degree. The strength of detachment

of the integrated cylindrical shanks, (of

diameter not less than 19 +/- 2 mm and

height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf.

Fixing will be by drilling holes on the road

for the shanks to go inside, without nails and

using epoxy resin based adhesive as per

manufacturers recommendation and The

color of the marker should be as per the IRC

One Crore directed

Eight by Twenty

Lakh(s) Engineer-in-

Two Thousand Eight Hundred Seventy

Seven And Paise Forty Six Only

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division