Design, Construction, Testing and Commissioning of 0.80 ML capacity RCC ESR with 25.00Mtr Staging, Construction of Compound wall and Pump house in Behera Sahi Pump House at Nayapalli in Ward No-37, Bhubaneswar

Design, Construction, Testing & Commissioning of 8.0 Lakh lit capacity RCC ESR with 25.00Mtr Staging, Construction of Compound wall & Pump House in Behera Sahi Pump House at Nayapalli in ward no-37, Bhubaneswar

Design, Construction, Testing & Commissioning of 1no RCC ESR of capacity 8.0 Lakh lit with 25.00Mtr Staging at Nayapalli Behera Sahi (Back side Rabanapodi Ground Nayapalli) respectively including all works such as soil investigation, excavation, required footing of raft/pile, back filling & disposal of earth , RCC & PCC of required grade, shuttering, brick work, painting, finishing, connection pipes upto 10m beyond tank structure, valves fitting, expansion joint, expansion below, ultrasonic level transmitter, lighting arrester etc including supply of all labour, materials, tools & plants including testing & commissioning etc all complete as per specification and direction of Engineer-in-charge.

Supply of Level indicator to be installed at UGR and ESR with following specification Range= 0 to 8 mtr Type =Radar, Power Supply=24V DC, Out Put=4-20mA (Make- Vega/Forbes Marshall/ABB/E&H/Equivalent make with approval of the authority)

Supply of Pressure transmeter to be installed at 300 mm dia delivery main with following technical specification. i,e. Range up to 10 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,(Make- Vega/Forbes Marshall/ABB/E&H/Equivalent make with approval of the authority)

Installation of level indicator& 1 Nos pressure sensor including supply of all required materials like SS mountingplate,laying of PVC pipe, excavation of soil,arrangement for making drill on 250 mm DI pipe for safe installation of instruments with providing Engineering support for programmingetc. as per direction of Engineer-In-charge.

Fly Ash Brik masonry Compound wall with RCC column

Supplying all labour, T&P and earth work in excavation in stoney earth and gravel mixed with stone boulders not exceeding 0.014 cum in volume within 50M initial lead and 1.5M initial lift, in foundation as per the direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.

Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs

R.C.C. Beams, Column, Grider and Bressmer

Providing C.C.(1:1.5:3) for R.C.C. work with 12mm size C.B.H.G. chips including hoisting & laying including supply of all materials, labour T&P etc. all complete as per direction and specification of Engineer-in-charge.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge.

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in foundation and plinth

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in Super structure.

Filling foundation and plinth with excavated materials including watering and ramming as per specification & direction of Engineer-in-charge.

Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.

12 mm thick cement plaster in C.M. ( 1 : 6 ) over brick work to inside surfaces including cost of materials, with taxes, royalties, transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge

Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost, conveyance, royalities etc, all complete.

Supplying all materials labour T&P for providing M.S. Grill/ Pipe as per following size as per specification.all complete.

Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.

Construction of Pannel Room with Toilet of Size- 5.90mtr x 11.80mtr

Supplying all labour, T&P and earth work in excavation in stoney earth and gravel mixed with stone boulders not exceeding 0.014 cum in volume within 50M initial lead and 1.5M initial lift, in foundation as per the direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.

Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge.

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in foundation and plinth

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:4) in foundation and plinth

Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials as per direction of Engineer-in-charge.

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in Superstructure .

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

Lintel -

Chajja -

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . as per P.W.D. specification and direction of Engineer-in-charge.

Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge.

Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete.

Supplying all materials labour & T & P for 16 mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete.

Supplying all materials labour & T & P for 12 mm. thick cement plaster in cement mortar (1:4) for RCC surface including curing scafolding etc. complete.

Providing ,fitting & fixing aluminium door with anodized allluminium door section of 9202 as vertical member ,9201 as top member & 9200 as bottom & middle member with frame section no. 9221 and tapper clip no. 4660 and the frame to be completed by means of joining angle No. 1855 including cost of labour, T & P hire charges of drilling machine, labour charges etc. complete .

Supplying and fitting & fixing of unPlasticised polyvinyle chloride (UPVC) casement Window with top fixed -60-Series duly manuforced using UPVC reinforced profile of 60mm x55mm x2.5mm for outer frames, 75mm x 60mm 2.25mm for casement window sash profile & 74mm x 60mm x2.5mm muilion profile caapable of mounting single glazing system strurally reinforced with hot deep galvanised up to 50 microns of minimum thick ness of 1.5 mm prefabricated &weded through fusion welding the window sash shall be fitted with 6mm toughened glass & SAINT-GOBAIN make duly fixed with EPDM weathering seal clear including cost & conveyance of all materials, accessories, labour charges materials

Fixing Vertified industrial floor tiles of premium grade having thickness 8mm to 10 mm confirming to IS:4457 of size 30cm x 30cm in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete.

Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes into dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete excluding cost of marble.

Supplying all materials, labour, T&P and fixing of ceramic glaze tiles in dados, skirting with 450mm x 300mm size on 12mm. thick C.M. plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shed of the tiles including rubbing, polishing etc all complete. as per the direction of the Engineer in charge.

Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearlpaint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm.Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.

Supplying all materials, labour, T&P and fitting and fixing of 30 mm single panel PVC door shutter with door frame of 40mmx48mm size of approved quality including fixing materials and cost , transportation , taxes etc. all complete in all respect as per the direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Providing and fixing to wall, ceiling and floor / in treanches of UPVC ASTM (Sch-80) pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge.

20mm dia uPVC pipe -

25mm dia uPVC pipe -

25mm dia uPVC pipe -

25mm dia UPVC BALL VALVE Sch-80(Sol. Welded with Metal Ball)

Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.22"x 16"(550x400) W.H.B, Pedestal, West, Connection pipe, bracket etc all complete set. (Make:- Parryware/Hindware/Nycer/ Equivalent make with approval of the authority)

Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately)(Make:- Parryware/Hindware/Nycer/ Equivalent make with approval of the authority)

Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.(Make:- Parryware/Hindware/Equivalent make with approval of the authority)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to specification, with all fittings and fixtures complete.(Make:- Parryware/Hindware/Equivalent make with approval of the authority)

Supplying fitting & fixing of the following H.C.I./ P.V.C S.W.R pipe & fittings as per PH specification & direction of EIC.

110mm dia PVC SWR Pipe

110mm dia PVC SWR Door Bend

110mm dia PVC SWR Plain Bend

110mm dia PVC SWR P Trap

110mm dia PVC SWR Cowl

110mm dia PVC SWR Clamp

Supplying, fitting & fixing the following PH fittings and fixtures of standard make & quality as per PH specification.

15mm dia C.P. Long body bib cock. (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

15mm dia C.P. Two-in-One bib cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

C.P. Soap Holder (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

C.P. towel rail.(600x20)mm(Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

C.P. glass self with glass (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

5" C.P. Grating

15mm dia c.p. pillar cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

15mm dia C.P. Angular stop cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority)

Bevelled Edge Mirrior

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.

Supplying all materials labour T&P for providing M.S. Grill/ Pipe as per following size as per specification.all complete.

Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .

Finishing plastered surfaces of walls with Berger Synthetic putty (interior wall puty) wall puty and making smooth to receive painting.

Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete.

Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete.

Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection ( Make of wire -Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority )

Light Points Group - A

Light Points Group - B

5A Plug Point

Fan Point (Group - A)

Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge.

Step up modular regulator for Fan

15watt LED Bulb.

1200mm Ceiling Fan (Make: - Havells/ Bajaj/Usha/ Equivalent make with approval of the authority)

Electric 200mm Exhaust Fan (Make: - Havells/ Bajaj/Usha/ Equivalent make with approval of the authority)

Titanio Pro LED Tube Light -18W (Double side connection)

32A Double Pole MCB.

5 Amp switch

5 Amp socket

Ceiling Rose -

Angle Holder

Please Enable Macros to View BoQ information