Loading…
Loading…
Tender ID
Tender Value
Refer Docs
EMD Value
₹13,400
Closing Date
2 Feb 2026, 6:00 pmClosed
Building Department, Bhavnagar Municipal Corporation, Sir Mangalsinhji Road, Kalanala, Bhavnagar - 364001
Construction of Compound Wall and paver block inside Anganvadi centre No-15/1 Near Rukhdiya Hanuman Temple, Karchaliyapara, Bhavnagar.
269261
BUILDING / Compound Wall/Second Trail / 2025-26
Open
Civil Works - Buildings
Works
Bhavnagar
8 documents required · 8 mandatory
₹900
Commissioner,Bhavanagar Municipal Corporation,
₹13,400
23 Jan 2026
23 Jan 2026
23 Jan 2026
2 Feb 2026
23 Jan 2026
Consruction of Compound wall and paver block work inside Anganwadi
Center no. 15 / 1 near Rukhadiya Hanuman temple Karchaliyapara,
No ITEM QTY UNIT AMOUNT
Excavation for foundation upto 1.5 m depth including
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter
lead.(A) Loose or soft soil
SOR - 2024-25 item code - 04001A
Boring holes 3.5 m deep in ordinary soil (for cast in
situ piles) and getting out the soil and disposal of the
surplus excavated soil as directed within a lead of
Meter for following diameter of pipes.(iii) 300 mm
SOR - 2024-25 / item code - 04010C /
Extra for under reaming inside the bore Holes for
under reamed piles of following Diameter.(iii) 300 mm
SOR - 2024-25 / item code - 04011C /
Providing and laying cement concrete 1:2:4 (1-
Cement : 2- Coarse sand : 4- graded stone
4 aggregates 20 mm nominal size) and curing complete 44.00 4075.35 Cum
including cost of formwork in (A) Foundation and
Plinth (upto 10 ton)
Providing laying controlled cement concrete M-250
and curing complete including the cost of form work
5 but excluding the cost of reinforcement for reinforced 10.00 6949.81 Cum
concrete work in GROUND BEAMS / PLINTH
Providing laying controlled cement concrete M-250
and curing complete including the cost of form work
but excluding the cost of reinforcement for reinforced
concrete work in COLUMN
Providing laying controlled cement concrete M-250
and curing complete including the cost of form work
but excluding the cost of reinforcement for reinforced
concrete work in COPPING FOR ALL LEVEL
Brick work using common Brunt clay building bricks
having crushing strength not less than 35 Kg./Sqcm.
8 In foundation and plinth in cement mortar 1:6 20.00 4279.98 Cum
(1cement : 6 fine sand) (B) Conventional (up to 10 ton
SOR - 2024-25 / item code - 06002BA /
Extra for brick work in superstructure above floor two
level Item No. 1(6.12) (B) Conventional (upto 10 ton)
SOR - 2024-25 / item code - 06006B /
20mm thick sand faced cement plaster on walls
upto height 10 metres above ground level consisting
10 of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- 395.00 350.57 Sqm
sand) and 8mm thick finishing coat of C.M. 1:1 (1-
cement : 1-sand) etc. complete.
SOR -2024-25 / item code - 17009 /
Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an required
shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials.etc complete The material shall
be as described in list of approved material.shade
and pattern as directed by Architects/City Engineer /
Executive Engineer in charge.
SOR - 2024-25 / Item code -
Providing & fixing M.S. grills of required pattern using
M.S. flats, bright bar, hollow MS sactions at required
12 spacing and frame all-round square or round bars 170.00 116.15 Kg
with round headed bolts and nuts or by screws.
Design and pattern as directed by Architect
Providing TMT Bar FE 500D reinforcement for R.C.C.
13 work including bending, binding and placing in 3100.00 77.29 Kg
position complete upto floor two level
Govt. R&B / SOR - 2024-25/ item code - 05014C /
Providing and fixing pre-cast Rubber Dye / steel Dye
inter locking concrete block 60mm thick with grade of
concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design Confirming
to IS 15658 : 2006 including 35 mm Sand layer for
levelling and filling the joint with sand in proper line
and level as per guidlines of IRC : SP 63-2018
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm length,30cm
height and 15cm thick of M250 grade concret as per
approved design and including excavation for fixing in
proper line and level,filling the joint with C:M 1:3
(1cement:3fine sand) etc complete.
Govt. R&B / SOR - 2024-25/ ch-14-14032 / Page
TOP SOIL: Supplying and spreading in position
150mm thk layer of good approved red sieved soil
including levelling, watering, consolidation by
16 manually or mechanically (which ever convenient at 10.00 371.68 Cum
site) at every 50mm thik layers, cost including of all
materials, labour and other charges required to
complete and as directed by the Engineer In charge
Providing,supplying ,laying and planting different
kinds of plants/ shrubs/ ground cover ( 7nos per
sq.mt) in suggested area including with necessary
excavation minimum depth 0.30 mt as directed by
Architect, filled with good quality garden soil required
for plants,curing,required FYM farm yard manure, for
flower bed etc.complete at all level,heights as per
design and directed by the Engineer In
charge(Notes. please minimumm height of all plants
not less then 0.45 to 0.60 mt )
18 supplying quary spauls. 81.00 381.78 Cum
BMC/ROAD DEPT+/ TENDER WORK-2023-24 /
Spreading of quary spuls, murram & machine
BMC/ROAD DEPT+/ TENDER WORK-2023-24 /
Rolling and consolidation of soling including filling in
20 depression which occur during the process, with 460.00 8.08 Sqm
power roler 8 tonne to 12 tonne.
BMC/ROAD DEPT+/ TENDER WORK-2023-24 /
Supplying & Fixing 600 mm dia hot dip galvanising
cross spiral type razor edge concertina coil having
circles, 200 clips with optimum openable strentch of
8m length using a central core wire high corbon
spring steel (High tensile wire) made up of 2.6mm dia
as per IS:4454, Part-1, grade-1-II having minimum
galvanising of 230-250 gsm per mm2 aroung which a
edge of razor sharp barbs strip of 5mm thick & 19mm
21 width confirming to IS:513DD quality having minimum 80.00 494.90 Rmt
galvanizing coating of 12 microns with series of barbs
punched along the length at regular interval support /
tied with two rows of barbered runner wires to newly
proposed MS / GI angle brackets at top and one
runner wire at the bottom with U nails & clips etc
complete as per manufacturers specification and
directed by EIC. (The item rate does not include the
rate of MS / GI angles.)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2.Tender Condition.pdf
3.Tender Specification.pdf
5. VENDOR LIST-2024.pdf
6.VENDOR UPDATE.pdf
7.Building Work Specification Booklet.pdf
8. daftari hukam.pdf
10. CHECKLIST.pdf
Tender BOQ.pdf
1.NIT.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .